From: Finn Thain <fthain@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Mike Rapoport" <rppt@kernel.org>,
"Sam Creasey" <sammy@sammy.net>,
"Jonathan Corbet" <corbet@lwn.net>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-m68k@lists.linux-m68k.org
Subject: [PATCH] m68k: Enable memtest functionality
Date: Fri, 12 Nov 2021 11:36:41 +1100 [thread overview]
Message-ID: <1a89fd7d58f22e4817cf5bb406cc191dc0bc9325.1636677401.git.fthain@linux-m68k.org> (raw)
Enable the memtest functionality and rearrange some code to prevent it
from clobbering the initrd.
The CONFIG_BLK_DEV_INITRD symbol was conditional on !defined(CONFIG_SUN3).
For simplicity, remove that test on the basis that m68k_ramdisk.size == 0
on Sun 3.
The SLIME source code at
http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
indicates that no BI_RAMDISK entry is ever passed to the kernel due
to #ifdef 0 around the relevant code.
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
Are there any other Linux bootloaders on Sun 3?
---
Changed since v1:
- Updated documentation.
---
Documentation/admin-guide/kernel-parameters.txt | 2 +-
arch/m68k/Kconfig | 1 +
arch/m68k/kernel/setup_mm.c | 15 ++++++---------
arch/m68k/mm/motorola.c | 2 ++
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 43dc35fe5bc0..ac42b421a95c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2924,7 +2924,7 @@
both parameters are enabled, hugetlb_free_vmemmap takes
precedence over memory_hotplug.memmap_on_memory.
- memtest= [KNL,X86,ARM,PPC,RISCV] Enable memtest
+ memtest= [KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
Format: <integer>
default : 0 <disable>
Specifies the number of memtest passes to be
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0b50da08a9c5..0e96066b3c46 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -9,6 +9,7 @@ config M68K
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
select ARCH_NO_PREEMPT if !COLDFIRE
+ select ARCH_USE_MEMTEST
select ARCH_WANT_IPC_PARSE_VERSION
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select DMA_DIRECT_REMAP if HAS_DMA && MMU && !COLDFIRE
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 4b51bfd38e5f..49e573b94326 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -338,13 +338,6 @@ void __init setup_arch(char **cmdline_p)
panic("No configuration setup");
}
- paging_init();
-
-#ifdef CONFIG_NATFEAT
- nf_init();
-#endif
-
-#ifndef CONFIG_SUN3
#ifdef CONFIG_BLK_DEV_INITRD
if (m68k_ramdisk.size) {
memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
@@ -354,6 +347,12 @@ void __init setup_arch(char **cmdline_p)
}
#endif
+ paging_init();
+
+#ifdef CONFIG_NATFEAT
+ nf_init();
+#endif
+
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI)
atari_stram_reserve_pages((void *)availmem);
@@ -364,8 +363,6 @@ void __init setup_arch(char **cmdline_p)
}
#endif
-#endif /* !CONFIG_SUN3 */
-
/* set ISA defs early as possible */
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
if (MACH_IS_Q40) {
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 9f3f77785aa7..5b6575eb6d02 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -455,6 +455,8 @@ void __init paging_init(void)
flush_tlb_all();
+ early_memtest(min_addr, max_addr);
+
/*
* initialize the bad page table and bad page to point
* to a couple of allocated pages
--
2.26.3
next reply other threads:[~2021-11-12 0:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-12 0:36 Finn Thain [this message]
2021-11-12 8:05 ` [PATCH] m68k: Enable memtest functionality Geert Uytterhoeven
2021-11-12 12:34 ` Mike Rapoport
2021-11-12 21:03 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a89fd7d58f22e4817cf5bb406cc191dc0bc9325.1636677401.git.fthain@linux-m68k.org \
--to=fthain@linux-m68k.org \
--cc=corbet@lwn.net \
--cc=geert@linux-m68k.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=rppt@kernel.org \
--cc=sammy@sammy.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).