linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ezequiel Garcia <ezequiel@collabora.com>
To: Benjamin Gaignard <benjamin.gaignard@collabora.com>,
	hverkuil@xs4all.nl, p.zabel@pengutronix.de, mchehab@kernel.org,
	shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com,
	gregkh@linuxfoundation.org, mripard@kernel.org,
	paul.kocialkowski@bootlin.com, wens@csie.org,
	jernej.skrabec@siol.net, emil.l.velikov@gmail.com,
	andrzej.p@collabora.com, jc@kynesim.co.uk,
	jernej.skrabec@gmail.com, nicolas@ndufresne.ca,
	cphealy@gmail.com
Cc: kernel@pengutronix.de, linux-imx@nxp.com,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/2] media: hantro: Add scaling lists feature
Date: Tue, 03 Aug 2021 16:15:39 -0300	[thread overview]
Message-ID: <1c3d2d66902978e3533074b4d95c8da220cab255.camel@collabora.com> (raw)
In-Reply-To: <20210715151223.656453-3-benjamin.gaignard@collabora.com>

On Thu, 2021-07-15 at 17:12 +0200, Benjamin Gaignard wrote:
> If the bitstream embedded scaling lists allow the driver to use
> them for decode the frames.
> The scaling lists are expected to be in raster scan order (i.e. not up
> right diagonal scan order)
> Allocate the memory needed to store lists.
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>

Thanks!

> ---
>  drivers/staging/media/hantro/hantro_drv.c     |  8 +--
>  .../staging/media/hantro/hantro_g2_hevc_dec.c | 52 +++++++++++++++++++
>  drivers/staging/media/hantro/hantro_hevc.c    | 21 ++++++++
>  drivers/staging/media/hantro/hantro_hw.h      |  3 ++
>  4 files changed, 81 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index 8ad074a464fe..5610b7821a54 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -267,9 +267,6 @@ static int hantro_try_ctrl(struct v4l2_ctrl *ctrl)
>                     sps->bit_depth_luma_minus8 != 2)
>                         /* Only 8-bit or 10-bit is supported */
>                         return -EINVAL;
> -               if (sps->flags & V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED)
> -                       /* No scaling support */
> -                       return -EINVAL;
>         }
>         return 0;
>  }
> @@ -451,6 +448,11 @@ static const struct hantro_ctrl controls[] = {
>                 .cfg = {
>                         .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS,
>                 },
> +       }, {
> +               .codec = HANTRO_HEVC_DECODER,
> +               .cfg = {
> +                       .id = V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX,
> +               },
>         }, {
>                 .codec = HANTRO_HEVC_DECODER,
>                 .cfg = {
> diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> index 90de74aa6b13..f95135ad553c 100644
> --- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> +++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> @@ -608,6 +608,56 @@ static void set_buffers(struct hantro_ctx *ctx)
>         hantro_write_addr(vpu, G2_TILE_BSD, ctx->hevc_dec.tile_bsd.dma);
>  }
>  
> +static void prepare_scaling_list_buffer(struct hantro_ctx *ctx)
> +{
> +       struct hantro_dev *vpu = ctx->dev;
> +       const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> +       const struct v4l2_ctrl_hevc_scaling_matrix *sc = ctrls->scaling;
> +       const struct v4l2_ctrl_hevc_sps *sps = ctrls->sps;
> +       u8 *p = ((u8 *)ctx->hevc_dec.scaling_lists.cpu);
> +       unsigned int scaling_list_enabled;
> +       unsigned int i, j, k;
> +
> +       scaling_list_enabled = !!(sps->flags & V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED);
> +       hantro_reg_write(vpu, &g2_scaling_list_e, scaling_list_enabled);
> +
> +       if (!scaling_list_enabled)
> +               return;
> +
> +       for (i = 0; i < ARRAY_SIZE(sc->scaling_list_dc_coef_16x16); i++)
> +               *p++ = sc->scaling_list_dc_coef_16x16[i];
> +
> +       for (i = 0; i < ARRAY_SIZE(sc->scaling_list_dc_coef_32x32); i++)
> +               *p++ = sc->scaling_list_dc_coef_32x32[i];
> +
> +       /* 128-bit boundary */
> +       p += 8;
> +
> +       /* write scaling lists column by column */
> +
> +       for (i = 0; i < 6; i++)
> +               for (j = 0; j < 4; j++)
> +                       for (k = 0; k < 4; k++)
> +                               *p++ = sc->scaling_list_4x4[i][4 * k + j];
> +
> +       for (i = 0; i < 6; i++)
> +               for (j = 0; j < 8; j++)
> +                       for (k = 0; k < 8; k++)
> +                               *p++ = sc->scaling_list_8x8[i][8 * k + j];
> +
> +       for (i = 0; i < 6; i++)
> +               for (j = 0; j < 8; j++)
> +                       for (k = 0; k < 8; k++)
> +                               *p++ = sc->scaling_list_16x16[i][8 * k + j];
> +
> +       for (i = 0; i < 2; i++)
> +               for (j = 0; j < 8; j++)
> +                       for (k = 0; k < 8; k++)
> +                               *p++ = sc->scaling_list_32x32[i][8 * k + j];
> +
> +       hantro_write_addr(vpu, HEVC_SCALING_LIST, ctx->hevc_dec.scaling_lists.dma);
> +}
> +
>  static void hantro_g2_check_idle(struct hantro_dev *vpu)
>  {
>         int i;
> @@ -668,6 +718,8 @@ int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)
>         set_buffers(ctx);
>         prepare_tile_info_buffer(ctx);
>  
> +       prepare_scaling_list_buffer(ctx);
> +
>         hantro_end_prepare_run(ctx);
>  
>         hantro_reg_write(vpu, &g2_mode, HEVC_DEC_MODE);
> diff --git a/drivers/staging/media/hantro/hantro_hevc.c b/drivers/staging/media/hantro/hantro_hevc.c
> index 4e816ea73018..95f765d9ff4e 100644
> --- a/drivers/staging/media/hantro/hantro_hevc.c
> +++ b/drivers/staging/media/hantro/hantro_hevc.c
> @@ -20,6 +20,8 @@
>  /* tile border coefficients of filter */
>  #define VERT_SAO_RAM_SIZE 48 /* bytes per pixel */
>  
> +#define SCALING_LIST_SIZE (16 * 64)
> +
>  #define MAX_TILE_COLS 20
>  #define MAX_TILE_ROWS 22
>  
> @@ -296,6 +298,11 @@ int hantro_hevc_dec_prepare_run(struct hantro_ctx *ctx)
>         if (WARN_ON(!ctrls->decode_params))
>                 return -EINVAL;
>  
> +       ctrls->scaling =
> +               hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX);
> +       if (WARN_ON(!ctrls->scaling))
> +               return -EINVAL;
> +
>         ctrls->sps =
>                 hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SPS);
>         if (WARN_ON(!ctrls->sps))
> @@ -324,6 +331,12 @@ void hantro_hevc_dec_exit(struct hantro_ctx *ctx)
>                                   hevc_dec->tile_sizes.dma);
>         hevc_dec->tile_sizes.cpu = NULL;
>  
> +       if (hevc_dec->scaling_lists.cpu)
> +               dma_free_coherent(vpu->dev, hevc_dec->scaling_lists.size,
> +                                 hevc_dec->scaling_lists.cpu,
> +                                 hevc_dec->scaling_lists.dma);
> +       hevc_dec->scaling_lists.cpu = NULL;
> +
>         if (hevc_dec->tile_filter.cpu)
>                 dma_free_coherent(vpu->dev, hevc_dec->tile_filter.size,
>                                   hevc_dec->tile_filter.cpu,
> @@ -367,6 +380,14 @@ int hantro_hevc_dec_init(struct hantro_ctx *ctx)
>  
>         hevc_dec->tile_sizes.size = size;
>  
> +       hevc_dec->scaling_lists.cpu = dma_alloc_coherent(vpu->dev, SCALING_LIST_SIZE,
> +                                                        &hevc_dec->scaling_lists.dma,
> +                                                        GFP_KERNEL);
> +       if (!hevc_dec->scaling_lists.cpu)
> +               return -ENOMEM;
> +
> +       hevc_dec->scaling_lists.size = SCALING_LIST_SIZE;
> +
>         hantro_hevc_ref_init(ctx);
>  
>         return 0;
> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> index d8126f8178f5..1becc22af0f9 100644
> --- a/drivers/staging/media/hantro/hantro_hw.h
> +++ b/drivers/staging/media/hantro/hantro_hw.h
> @@ -108,6 +108,7 @@ struct hantro_h264_dec_hw_ctx {
>   */
>  struct hantro_hevc_dec_ctrls {
>         const struct v4l2_ctrl_hevc_decode_params *decode_params;
> +       const struct v4l2_ctrl_hevc_scaling_matrix *scaling;
>         const struct v4l2_ctrl_hevc_sps *sps;
>         const struct v4l2_ctrl_hevc_pps *pps;
>         u32 hevc_hdr_skip_length;
> @@ -120,6 +121,7 @@ struct hantro_hevc_dec_ctrls {
>   * @tile_sao:          Tile SAO buffer
>   * @tile_bsd:          Tile BSD control buffer
>   * @ref_bufs:          Internal reference buffers
> + * @scaling_lists:     Scaling lists buffer
>   * @ref_bufs_poc:      Internal reference buffers picture order count
>   * @ref_bufs_used:     Bitfield of used reference buffers
>   * @ctrls:             V4L2 controls attached to a run
> @@ -131,6 +133,7 @@ struct hantro_hevc_dec_hw_ctx {
>         struct hantro_aux_buf tile_sao;
>         struct hantro_aux_buf tile_bsd;
>         struct hantro_aux_buf ref_bufs[NUM_REF_PICTURES];
> +       struct hantro_aux_buf scaling_lists;
>         int ref_bufs_poc[NUM_REF_PICTURES];
>         u32 ref_bufs_used;
>         struct hantro_hevc_dec_ctrls ctrls;

-- 
Kindly,
Ezequiel


  reply	other threads:[~2021-08-03 19:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-15 15:12 [PATCH v1 0/2] Add scaling lists support for HEVC Benjamin Gaignard
2021-07-15 15:12 ` [PATCH v1 1/2] media: hevc: Add scaling matrix control Benjamin Gaignard
2021-07-25  7:18   ` Jernej Škrabec
2021-08-03 19:29   ` Ezequiel Garcia
2021-07-15 15:12 ` [PATCH v1 2/2] media: hantro: Add scaling lists feature Benjamin Gaignard
2021-08-03 19:15   ` Ezequiel Garcia [this message]
2021-08-03 19:27     ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1c3d2d66902978e3533074b4d95c8da220cab255.camel@collabora.com \
    --to=ezequiel@collabora.com \
    --cc=andrzej.p@collabora.com \
    --cc=benjamin.gaignard@collabora.com \
    --cc=cphealy@gmail.com \
    --cc=emil.l.velikov@gmail.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hverkuil@xs4all.nl \
    --cc=jc@kynesim.co.uk \
    --cc=jernej.skrabec@gmail.com \
    --cc=jernej.skrabec@siol.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=nicolas@ndufresne.ca \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).