LKML Archive on lore.kernel.org
 help / color / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Pankaj Gupta <pagupta@redhat.com>,
	linux-nvdimm@lists.01.org, linux-kernel@vger.kernel.org,
	virtualization@lists.linux-foundation.org, kvm@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, linux-acpi@vger.kernel.org,
	qemu-devel@nongnu.org, linux-ext4@vger.kernel.org,
	linux-xfs@vger.kernel.org, mst@redhat.com
Cc: dan.j.williams@intel.com, zwisler@kernel.org,
	vishal.l.verma@intel.com, dave.jiang@intel.com,
	jasowang@redhat.com, willy@infradead.org, rjw@rjwysocki.net,
	hch@infradead.org, lenb@kernel.org, jack@suse.cz, tytso@mit.edu,
	adilger.kernel@dilger.ca, darrick.wong@oracle.com,
	lcapitulino@redhat.com, kwolf@redhat.com, imammedo@redhat.com,
	jmoyer@redhat.com, nilal@redhat.com, riel@surriel.com,
	stefanha@redhat.com, aarcange@redhat.com, david@fromorbit.com,
	cohuck@redhat.com, xiaoguangrong.eric@gmail.com,
	pbonzini@redhat.com, kilobyte@angband.pl, yuval.shaia@oracle.com,
	jstaron@google.com
Subject: Re: [PATCH v9 2/7] virtio-pmem: Add virtio pmem driver
Date: Wed, 15 May 2019 22:52:53 +0200
Message-ID: <1d6f6964-4653-ebf3-554f-666fda3779f1@redhat.com> (raw)
In-Reply-To: <9f6b1d8e-ef90-7d8b-56da-61a426953ba3@redhat.com>

On 15.05.19 22:46, David Hildenbrand wrote:
>> +	vpmem->vdev = vdev;
>> +	vdev->priv = vpmem;
>> +	err = init_vq(vpmem);
>> +	if (err) {
>> +		dev_err(&vdev->dev, "failed to initialize virtio pmem vq's\n");
>> +		goto out_err;
>> +	}
>> +
>> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
>> +			start, &vpmem->start);
>> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
>> +			size, &vpmem->size);
>> +
>> +	res.start = vpmem->start;
>> +	res.end   = vpmem->start + vpmem->size-1;
> 
> nit: " - 1;"
> 
>> +	vpmem->nd_desc.provider_name = "virtio-pmem";
>> +	vpmem->nd_desc.module = THIS_MODULE;
>> +
>> +	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
>> +						&vpmem->nd_desc);
>> +	if (!vpmem->nvdimm_bus) {
>> +		dev_err(&vdev->dev, "failed to register device with nvdimm_bus\n");
>> +		err = -ENXIO;
>> +		goto out_vq;
>> +	}
>> +
>> +	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
>> +
>> +	ndr_desc.res = &res;
>> +	ndr_desc.numa_node = nid;
>> +	ndr_desc.flush = async_pmem_flush;
>> +	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
>> +	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
>> +	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
>> +	if (!nd_region) {
>> +		dev_err(&vdev->dev, "failed to create nvdimm region\n");
>> +		err = -ENXIO;
>> +		goto out_nd;
>> +	}
>> +	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
>> +	return 0;
>> +out_nd:
>> +	nvdimm_bus_unregister(vpmem->nvdimm_bus);
>> +out_vq:
>> +	vdev->config->del_vqs(vdev);
>> +out_err:
>> +	return err;
>> +}
>> +
>> +static void virtio_pmem_remove(struct virtio_device *vdev)
>> +{
>> +	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
>> +
>> +	nvdimm_bus_unregister(nvdimm_bus);
>> +	vdev->config->del_vqs(vdev);
>> +	vdev->config->reset(vdev);
>> +}
>> +
>> +static struct virtio_driver virtio_pmem_driver = {
>> +	.driver.name		= KBUILD_MODNAME,
>> +	.driver.owner		= THIS_MODULE,
>> +	.id_table		= id_table,
>> +	.probe			= virtio_pmem_probe,
>> +	.remove			= virtio_pmem_remove,
>> +};
>> +
>> +module_virtio_driver(virtio_pmem_driver);
>> +MODULE_DEVICE_TABLE(virtio, id_table);
>> +MODULE_DESCRIPTION("Virtio pmem driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/nvdimm/virtio_pmem.h b/drivers/nvdimm/virtio_pmem.h
>> new file mode 100644
>> index 000000000000..ab1da877575d
>> --- /dev/null
>> +++ b/drivers/nvdimm/virtio_pmem.h
>> @@ -0,0 +1,60 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * virtio_pmem.h: virtio pmem Driver
>> + *
>> + * Discovers persistent memory range information
>> + * from host and provides a virtio based flushing
>> + * interface.
>> + **/
>> +
>> +#ifndef _LINUX_VIRTIO_PMEM_H
>> +#define _LINUX_VIRTIO_PMEM_H
>> +
>> +#include <linux/virtio_ids.h>
>> +#include <linux/module.h>
>> +#include <linux/virtio_config.h>
>> +#include <uapi/linux/virtio_pmem.h>
>> +#include <linux/libnvdimm.h>
>> +#include <linux/spinlock.h>
>> +
>> +struct virtio_pmem_request {
>> +	/* Host return status corresponding to flush request */
>> +	int ret;
>> +
>> +	/* command name*/
>> +	char name[16];
> 
> So ... why are we sending string commands and expect native-endianess
> integers and don't define a proper request/response structure + request
> types in include/uapi/linux/virtio_pmem.h like
> 
> struct virtio_pmem_resp {
> 	__virtio32 ret;
> }

FWIW, I wonder if we should even properly translate return values and
define types like

VIRTIO_PMEM_RESP_TYPE_OK	0
VIRTIO_PMEM_RESP_TYPE_EIO	1

..

> 
> #define VIRTIO_PMEM_REQ_TYPE_FLUSH	1
> struct virtio_pmem_req {
> 	__virtio16 type;
> }
> 
> ... and this way we also define a proper endianess format for exchange
> and keep it extensible
> 
> @MST, what's your take on this?
> 
> 


-- 

Thanks,

David / dhildenb

  reply index

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 14:54 [PATCH v9 0/7] " Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 1/7] libnvdimm: nd_region flush callback support Pankaj Gupta
2019-05-15 21:07   ` Dan Williams
2019-05-16  6:28     ` Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 2/7] virtio-pmem: Add virtio pmem driver Pankaj Gupta
2019-05-14 15:09   ` Randy Dunlap
2019-05-14 15:25     ` [Qemu-devel] " Pankaj Gupta
2019-05-15 20:46       ` Dan Williams
2019-05-15 20:46   ` David Hildenbrand
2019-05-15 20:52     ` David Hildenbrand [this message]
2019-05-16  7:54       ` Pankaj Gupta
2019-05-16  7:49     ` Pankaj Gupta
2019-05-16 13:59     ` Michael S. Tsirkin
2019-05-17  5:31       ` [Qemu-devel] " Pankaj Gupta
2019-05-17  0:12   ` Jakub Staroń
2019-05-17  5:35     ` [Qemu-devel] " Pankaj Gupta
2019-05-18  1:10       ` Jakub Staroń
2019-05-20  3:46         ` Pankaj Gupta
2019-05-20  3:47           ` Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 3/7] libnvdimm: add dax_dev sync flag Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 4/7] dm: enable synchronous dax Pankaj Gupta
2019-05-15 20:48   ` Dan Williams
2019-05-14 14:54 ` [PATCH v9 5/7] dax: check synchronous mapping is supported Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 6/7] ext4: disable map_sync for async flush Pankaj Gupta
2019-05-14 14:54 ` [PATCH v9 7/7] xfs: " Pankaj Gupta

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1d6f6964-4653-ebf3-554f-666fda3779f1@redhat.com \
    --to=david@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=cohuck@redhat.com \
    --cc=dan.j.williams@intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=dave.jiang@intel.com \
    --cc=david@fromorbit.com \
    --cc=hch@infradead.org \
    --cc=imammedo@redhat.com \
    --cc=jack@suse.cz \
    --cc=jasowang@redhat.com \
    --cc=jmoyer@redhat.com \
    --cc=jstaron@google.com \
    --cc=kilobyte@angband.pl \
    --cc=kvm@vger.kernel.org \
    --cc=kwolf@redhat.com \
    --cc=lcapitulino@redhat.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=nilal@redhat.com \
    --cc=pagupta@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=riel@surriel.com \
    --cc=rjw@rjwysocki.net \
    --cc=stefanha@redhat.com \
    --cc=tytso@mit.edu \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=vishal.l.verma@intel.com \
    --cc=willy@infradead.org \
    --cc=xiaoguangrong.eric@gmail.com \
    --cc=yuval.shaia@oracle.com \
    --cc=zwisler@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox