linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pierre Lombard <pierre.lombard@imag.fr>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] small doc update for /proc/sys/net/ipv4/icmp_rate{mask,limit}
Date: Wed, 12 Dec 2001 13:27:22 +0100	[thread overview]
Message-ID: <20011212122722.GA21997@sci41.imag.fr> (raw)

[-- Attachment #1: Type: text/plain, Size: 196 bytes --]

Hi,

Comments in the C code are incorrect and the documentation is
outdated.

Attached patch is for 2.4.17-pre8 but probably applies cleanly
against 2.5.x too.

-- 
Best regards,
  Pierre Lombard

[-- Attachment #2: 20011212-icmpmask.diff --]
[-- Type: text/plain, Size: 1737 bytes --]

--- linux-2.4.17-pre8~/Documentation/networking/ip-sysctl.txt	Wed Dec 12 12:52:25 2001
+++ linux-2.4.17-pre8/Documentation/networking/ip-sysctl.txt	Wed Dec 12 12:53:17 2001
@@ -309,13 +309,20 @@
 	ICMP ECHO requests sent to it or just those to broadcast/multicast
 	addresses, respectively.
 
-icmp_destunreach_rate - INTEGER
-icmp_paramprob_rate - INTEGER
-icmp_timeexceed_rate - INTEGER
-icmp_echoreply_rate - INTEGER (not enabled per default)
-	Limit the maximal rates for sending ICMP packets to specific targets.
+icmp_ratelimit - INTEGER
+	Limit the maximal rates for sending ICMP packets whose type matches
+	icmp_ratemask (see below) to specific targets.
 	0 to disable any limiting, otherwise the maximal rate in jiffies(1)
-	See the source for more information.
+	Default: 1
+
+icmp_ratemask - INTEGER
+	Mask made of ICMP types for which rates are being limited.
+	Default: 6168
+	Note: 6168 = 0x1818 = 1<<ICMP_DEST_UNREACH + 1<<ICMP_SOURCE_QUENCH +
+	      1<<ICMP_TIME_EXCEEDED + 1<<ICMP_PARAMETERPROB, which means
+	      dest unreachable (3), source quench (4), time exceeded (11)
+	      and parameter problem (12) ICMP packets are rate limited
+	      (check values in icmp.h)
 
 icmp_ignore_bogus_error_responses - BOOLEAN
 	Some routers violate RFC 1122 by sending bogus responses to broadcast
--- linux-2.4.17-pre8~/net/ipv4/icmp.c	Wed Dec 12 12:48:56 2001
+++ linux-2.4.17-pre8/net/ipv4/icmp.c	Wed Dec 12 12:51:41 2001
@@ -154,8 +154,8 @@
  * 	it's bit position.
  *
  *	default: 
- *	dest unreachable (0x03), source quench (0x04),
- *	time exceeded (0x11), parameter problem (0x12)
+ *	dest unreachable (3), source quench (4),
+ *	time exceeded (11), parameter problem (12)
  */
 
 int sysctl_icmp_ratelimit = 1*HZ;

             reply	other threads:[~2001-12-12 12:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-12-12 12:27 Pierre Lombard [this message]
2001-12-13  0:37 ` [PATCH] small doc update for /proc/sys/net/ipv4/icmp_rate{mask,limit} David S. Miller
2001-12-13  8:57   ` Pierre Lombard
2001-12-13  8:59   ` David S. Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20011212122722.GA21997@sci41.imag.fr \
    --to=pierre.lombard@imag.fr \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).