[PATCH] [2.5.36] USER_HZ & SG_[GS]ET_TIMEOUT

[PATCH] [2.5.36] USER_HZ & SG_[GS]ET_TIMEOUT

[Rolf Fokkens]

Hi!

One of the places in the kernel where HZ is interfaced with userspace
is in the SG driver. With HZ different from USER_HZ this may result
in all kinds of unexpected timeouts when using SG.

This patch is an attempt to fix this by transforming USER_HZ based timing to
HZ based timing before storing it in timeout. To make sure that SG_GET_TIMEOUT
and SG_SET_TIMEOUT behave consistently a field timeout_user is added which
stores the exact value that's passed by SG_SET_TIMEOUT and it's returned on
SG_GET_TIMEOUT.

Rolf

--- linux-2.5.36.orig/drivers/scsi/sg.c	Sun Sep  8 09:00:32 2002
+++ linux-2.5.36/drivers/scsi/sg.c	Wed Sep 18 19:47:15 2002
@@ -82,6 +82,19 @@
 
 #define SG_MAX_DEVS_MASK ((1U << KDEV_MINOR_BITS) - 1)
 
+/*
+ * Suppose you want to calculate the formula muldiv(x,m,d)=int(x * m / d)
+ * Then when using 32 bit integers x * m may overflow during the calculation.
+ * Replacing muldiv(x) by muldiv(x)=((x % d) * m) / d + int(x / d) * m
+ * calculates the same, but prevents the overflow when both m and d
+ * are "small" numbers (like HZ and USER_HZ).
+ * Of course an overflow is inavoidable if the result of muldiv doesn't fit
+ * in 32 bits.
+ */
+#define MULDIV(X,MUL,DIV) ((((X % DIV) * MUL) / DIV) + ((X / DIV) * MUL))
+
+#define SG_DEFAULT_TIMEOUT MULDIV(SG_DEFAULT_TIMEOUT_USER, HZ, USER_HZ)
+
 int sg_big_buff = SG_DEF_RESERVED_SIZE;
 /* N.B. This variable is readable and writeable via
    /proc/scsi/sg/def_reserved_size . Each time sg_open() is called a buffer
@@ -150,7 +163,8 @@
 	struct sg_device *parentdp;	/* owning device */
 	wait_queue_head_t read_wait;	/* queue read until command done */
 	rwlock_t rq_list_lock;	/* protect access to list in req_arr */
-	int timeout;		/* defaults to SG_DEFAULT_TIMEOUT */
+	int timeout;		/* defaults to SG_DEFAULT_TIMEOUT      */
+	int timeout_user;	/* defaults to SG_DEFAULT_TIMEOUT_USER */
 	Sg_scatter_hold reserve;	/* buffer held for this file descriptor */
 	unsigned save_scat_len;	/* original length of trunc. scat. element */
 	Sg_request *headrp;	/* head of request slist, NULL->empty */
@@ -790,10 +804,15 @@
 			return result;
 		if (val < 0)
 			return -EIO;
-		sfp->timeout = val;
+		if (val >= MULDIV (INT_MAX, USER_HZ, HZ))
+		    val = MULDIV (INT_MAX, USER_HZ, HZ);
+		sfp->timeout_user = val;
+		sfp->timeout = MULDIV (val, HZ, USER_HZ);
+
 		return 0;
 	case SG_GET_TIMEOUT:	/* N.B. User receives timeout as return value */
-		return sfp->timeout;	/* strange ..., for backward compatibility */
+				/* strange ..., for backward compatibility */
+		return sfp->timeout_user;
 	case SG_SET_FORCE_LOW_DMA:
 		result = get_user(val, (int *) arg);
 		if (result)
@@ -2431,6 +2450,7 @@
 	sfp->rq_list_lock = RW_LOCK_UNLOCKED;
 
 	sfp->timeout = SG_DEFAULT_TIMEOUT;
+	sfp->timeout_user = SG_DEFAULT_TIMEOUT_USER;
 	sfp->force_packid = SG_DEF_FORCE_PACK_ID;
 	sfp->low_dma = (SG_DEF_FORCE_LOW_DMA == 0) ?
 	    sdp->device->host->unchecked_isa_dma : 1;
--- linux-2.5.36.orig/include/scsi/sg.h	Sun Sep  8 09:00:19 2002
+++ linux-2.5.36/include/scsi/sg.h	Wed Sep 18 10:27:12 2002
@@ -304,7 +304,12 @@
 
 
 /* Defaults, commented if they differ from original sg driver */
-#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */
+#ifdef __KERNEL__
+#define SG_DEFAULT_TIMEOUT_USER	(60*USER_HZ) /* HZ == 'jiffies in 1 second' */
+#else
+#define SG_DEFAULT_TIMEOUT	(60*HZ)	     /* HZ == 'jiffies in 1 second' */
+#endif
+
 #define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
 				  the new interface is used */
 #define SG_DEF_UNDERRUN_FLAG 0