# I think it's time to split up the Filesystem menu in a "better reading" way.
# So place every Journalling Filesystem into a seperate menu:
# We have: ReiserFS, JFFS, JFFSv2, Ext3, XFS and JFS

--- linux-2.5-old/fs/Config.in		Thu Sep 26 12:19:14 2002
+++ linux-2.5-new/fs/Config.in		Thu Sep 26 21:15:37 2002
@@ -13,10 +13,6 @@
 tristate 'Kernel automounter support' CONFIG_AUTOFS_FS
 tristate 'Kernel automounter version 4 support (also supports v3)' CONFIG_AUTOFS4_FS
 
-tristate 'Reiserfs support' CONFIG_REISERFS_FS
-dep_mbool '  Enable reiserfs debug mode' CONFIG_REISERFS_CHECK $CONFIG_REISERFS_FS
-dep_mbool '  Stats in /proc/fs/reiserfs' CONFIG_REISERFS_PROC_INFO $CONFIG_REISERFS_FS
-
 dep_tristate 'ADFS file system support (EXPERIMENTAL)' CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL
 dep_mbool '  ADFS write support (DANGEROUS)' CONFIG_ADFS_FS_RW $CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL
 
@@ -26,13 +26,6 @@
 
 dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL
 
-tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS
-# CONFIG_JBD could be its own option (even modular), but until there are
-# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
-# dep_tristate '  Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
-define_bool CONFIG_JBD $CONFIG_EXT3_FS
-dep_mbool '  JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD
-
 # msdos file systems
 tristate 'DOS FAT fs support' CONFIG_FAT_FS
 dep_tristate '  MSDOS fs support' CONFIG_MSDOS_FS $CONFIG_FAT_FS
@@ -42,16 +42,7 @@
 
 dep_tristate '  VFAT (Windows-95) fs support' CONFIG_VFAT_FS $CONFIG_FAT_FS
 dep_tristate 'EFS file system support (read only) (EXPERIMENTAL)' CONFIG_EFS_FS $CONFIG_EXPERIMENTAL
-dep_tristate 'Journalling Flash File System (JFFS) support' CONFIG_JFFS_FS $CONFIG_MTD
-if [ "$CONFIG_JFFS_FS" = "y" -o "$CONFIG_JFFS_FS" = "m" ] ; then
-   int 'JFFS debugging verbosity (0 = quiet, 3 = noisy)' CONFIG_JFFS_FS_VERBOSE 0
-   bool 'JFFS stats available in /proc filesystem' CONFIG_JFFS_PROC_FS
-fi
-dep_tristate 'Journalling Flash File System v2 (JFFS2) support' CONFIG_JFFS2_FS $CONFIG_MTD
-if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then
-   int '  JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
-   dep_bool '  JFFS2 support for NAND flash (EXPERIMENTAL)' CONFIG_JFFS2_FS_NAND $CONFIG_EXPERIMENTAL
-fi
+
 tristate 'Compressed ROM file system support' CONFIG_CRAMFS
 bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS
 define_bool CONFIG_RAMFS y
@@ -60,10 +60,6 @@
 dep_mbool '  Microsoft Joliet CDROM extensions' CONFIG_JOLIET $CONFIG_ISO9660_FS
 dep_mbool '  Transparent decompression extension' CONFIG_ZISOFS $CONFIG_ISO9660_FS
 
-tristate 'JFS filesystem support' CONFIG_JFS_FS
-dep_mbool '  JFS debugging' CONFIG_JFS_DEBUG $CONFIG_JFS_FS
-dep_mbool '  JFS statistics' CONFIG_JFS_STATISTICS $CONFIG_JFS_FS
-
 tristate 'Minix fs support' CONFIG_MINIX_FS
 
 tristate 'FreeVxFS file system support (VERITAS VxFS(TM) compatible)' CONFIG_VXFS_FS
@@ -101,13 +101,9 @@
 tristate 'UFS file system support (read only)' CONFIG_UFS_FS
 dep_mbool '  UFS file system write support (DANGEROUS)' CONFIG_UFS_FS_WRITE $CONFIG_UFS_FS $CONFIG_EXPERIMENTAL
 
-tristate 'XFS filesystem support' CONFIG_XFS_FS
-dep_mbool    '  Realtime support (EXPERIMENTAL)' CONFIG_XFS_RT $CONFIG_XFS_FS $CONFIG_EXPERIMENTAL
-dep_mbool    '  Quota support' CONFIG_XFS_QUOTA $CONFIG_XFS_FS
-if [ "$CONFIG_XFS_QUOTA" = "y" ]; then
-   define_bool CONFIG_QUOTACTL y
-fi
-
+# Journalling File Systems
+source fs/journalfs/Config.in
+
 if [ "$CONFIG_NET" = "y" ]; then
 
    mainmenu_option next_comment
--- linux-2.5-old/fs/journalfs/Config.in	Thu Sep 26 12:19:14 2002
+++ linux-2.5-new/fs/journalfs/Config.in	Thu Sep 26 21:15:37 2002
@@ -0,0 +1,57 @@
+#
+# Journalling File Systems
+#
+# We have: JFFS, JFFSv2, ReiserFS, Ext3fs, JFS, XFS
+
+mainmenu_option next_comment
+comment 'Journalling File Systems'
+
+
+# JFFS
+dep_tristate 'Journalling Flash File System (JFFS) support' CONFIG_JFFS_FS $CONFIG_MTD
+if [ "$CONFIG_JFFS_FS" = "y" -o "$CONFIG_JFFS_FS" = "m" ] ; then
+   int '  JFFS debugging verbosity (0 = quiet, 3 = noisy)' CONFIG_JFFS_FS_VERBOSE 0
+   bool '  JFFS stats available in /proc filesystem' CONFIG_JFFS_PROC_FS
+fi
+
+
+# JFFSv2
+dep_tristate 'Journalling Flash File System v2 (JFFS2) support' CONFIG_JFFS2_FS $CONFIG_MTD
+if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then
+   int '  JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
+   dep_bool '  JFFS2 support for NAND flash (EXPERIMENTAL)' CONFIG_JFFS2_FS_NAND $CONFIG_EXPERIMENTAL
+fi
+
+
+# ReiserFS
+tristate 'Reiserfs support' CONFIG_REISERFS_FS
+dep_mbool '  Enable reiserfs debug mode' CONFIG_REISERFS_CHECK $CONFIG_REISERFS_FS
+dep_mbool '  Stats in /proc/fs/reiserfs' CONFIG_REISERFS_PROC_INFO $CONFIG_REISERFS_FS
+
+
+# Ext3 FS
+tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS
+# CONFIG_JBD could be its own option (even modular), but until there are
+# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
+# dep_tristate '  Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
+define_bool CONFIG_JBD $CONFIG_EXT3_FS
+dep_mbool '  JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD
+
+
+# JFS
+tristate 'JFS filesystem support' CONFIG_JFS_FS
+dep_mbool '  JFS debugging' CONFIG_JFS_DEBUG $CONFIG_JFS_FS
+dep_mbool '  JFS statistics' CONFIG_JFS_STATISTICS $CONFIG_JFS_FS
+
+
+# XFS
+tristate 'XFS filesystem support' CONFIG_XFS_FS
+dep_mbool    '  Realtime support (EXPERIMENTAL)' CONFIG_XFS_RT $CONFIG_XFS_FS $CONFIG_EXPERIMENTAL
+dep_mbool    '  Quota support' CONFIG_XFS_QUOTA $CONFIG_XFS_FS
+if [ "$CONFIG_XFS_QUOTA" = "y" ]; then
+   define_bool CONFIG_QUOTACTL y
+fi
+
+
+endmenu
+