From: Ken Savage <kens1835@shaw.ca>
To: linux-kernel@vger.kernel.org
Subject: 3ware Escalade 7500 init problems on 2.4.19
Date: Wed, 02 Oct 2002 08:59:54 -0700 [thread overview]
Message-ID: <200210020859.54621.kens1835@shaw.ca> (raw)
Hi there..
Just received a 3ware 7500-8 RAID card and am trying to get it installed
on a dual Athlon system with 4GB of RAM, running 2.4.19.
SCSI support and SCSI disk support are enabled.
Low level support for 3w-xxxx is enabled.
The RAID has been flashed to the latest hardware revision.
Kernel loads up fine, and gets to initializing the card, where it waits
for a while as it attempts to init and reinit, etc, the card. Ultimately,
it simply resets the card and takes the card offline. 'dmesg' reports
the following in the kernel log:
scsi0 : Found a 3ware Storage Controller at 0xc400, IRQ: 11, P-chip: 1.3
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
3w-xxxx: scsi0: Reset succeeded.
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
scsi: device set offline - not ready or command retry failed after host reset:
host 0 channel 0 id 0 lun 0
Any ideas what the problem might be?
Ken Savage kens1835@shaw.ca
AllResearch.com
next reply other threads:[~2002-10-02 15:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-02 15:59 Ken Savage [this message]
2002-10-02 17:01 ` 3ware Escalade 7500 init problems on 2.4.19 Bryan O'Sullivan
2002-10-02 17:18 ` Ken Savage
2002-10-03 17:36 ` Jeff V. Merkey
2002-10-02 17:38 Adam Radford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200210020859.54621.kens1835@shaw.ca \
--to=kens1835@shaw.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).