linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vojtech Pavlik <vojtech@suse.cz>
To: Stian Jordet <liste@jordet.nu>
Cc: Vojtech Pavlik <vojtech@suse.cz>, linux-kernel@vger.kernel.org
Subject: Re: Mouse/Keyboard problems with 2.5.38
Date: Mon, 7 Oct 2002 22:01:06 +0200	[thread overview]
Message-ID: <20021007220106.A1640@ucw.cz> (raw)
In-Reply-To: <1034020510.1499.8.camel@chevrolet>; from liste@jordet.nu on Mon, Oct 07, 2002 at 09:55:10PM +0200

On Mon, Oct 07, 2002 at 09:55:10PM +0200, Stian Jordet wrote:
> man, 2002-10-07 kl. 15:00 skrev Vojtech Pavlik:
> > On Fri, Sep 27, 2002 at 01:51:43PM +0200, Stian Jordet wrote:
> > > fre, 2002-09-27 kl. 09:10 skrev Vojtech Pavlik:
> > > > Unfortunately the little bit of information I needed scrolled away
> > > > already. Can you try with the other shift (right?)? That won't
> > > > probably crash your machine, but will most likely generate an "Unknown
> > > > scancode" message. Again, send me the log lines. This time they should
> > > > make it in the syslog well.
> > > Ok, the combination which freezes the computer is right SHIFT, and
> > > pageup/down, etc. Left SHIFT works just like expected. This time I first
> > > wrote 'cp /var/log/syslog /tmp/syslog', then 'echo cut-here >
> > > /var/log/syslog' Left-SHIFT+PAGEUP, arrow up two times, to get the cp..,
> > > enter. Then I edited /tmp/syslog and copied only what was after
> > > "cut-here". So the keystrokes included here should be Left-SHIFT+PAGEUP,
> > > ARROW-UP, ARROW-UP, ENTER. If this works like I think it should. As you
> > > can see, it did not generate an "Unknown scancode"...
> > 
> > Can you test whether the attached patch helps?
> 
> I was starting to think you had forgot me :)

In that case you should have reminded me of your problem. I tend to
forget when e-mails accumulate beyond a couple hundreds. ;)

> The patch helped a lot. Now it doesn't crash at all. But when I use
> RIGHT-ALT+PAGE-UP, I get these errors a couple of times, then it
> suddenly works as it should.
> 
> atkbd.c: Unknown key (set 2, scancode 0x1b6, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> input: AT Set 2 keyboard on isa0060/serio0   
> atkbd.c: Unknown key (set 2, scancode 0x1c9, on isa0060/serio0) pressed.
> 
> I think the first key is LEFT-SHIFT+PAGE-UP, and the rest the same with
> right-shift. Anyway, after those first errors, it works perfect. No
> freeze like before. Thanks :) Great work :)

I still don't like this behavior - the keyboard shouldn't reinitialize.
Can you repeat the same with I8042_DEBUG_IO?

I definitely wasn't able to reproduce this here with very violent
bashing at my keyboard. And l/r alt-pageup works here just fine.

-- 
Vojtech Pavlik
SuSE Labs

  reply	other threads:[~2002-10-07 19:55 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-09-25 23:31 Stian Jordet
2002-09-25 23:47 ` Brad Hards
2002-09-26  8:58 ` Vojtech Pavlik
2002-09-26 11:32   ` Stian Jordet
2002-09-26 11:37     ` Vojtech Pavlik
2002-09-26 15:30       ` Stian Jordet
2002-09-26 16:57         ` Vojtech Pavlik
2002-09-26 22:50           ` Stian Jordet
2002-09-27  7:10             ` Vojtech Pavlik
2002-09-27 11:51               ` Stian Jordet
2002-10-07 13:00                 ` Vojtech Pavlik
2002-10-07 19:55                   ` Stian Jordet
2002-10-07 20:01                     ` Vojtech Pavlik [this message]
2002-10-08  0:20                       ` Stian Jordet
2002-10-08  8:17                         ` Vojtech Pavlik
2002-10-08 17:18                           ` Stian Jordet
2002-10-08 17:25                             ` Vojtech Pavlik
2002-10-08 23:48                               ` Stian Jordet
     [not found]                                 ` <20021009082215.C1890@ucw.cz>
2002-10-09 10:42                                   ` Stian Jordet
2002-10-09  0:54                               ` Stian Jordet
2002-09-30 22:10               ` Stian Jordet
     [not found] <20021008085842.A4412@ucw.cz>
2002-10-08 17:14 ` Stian Jordet
2002-10-08 17:23   ` Vojtech Pavlik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021007220106.A1640@ucw.cz \
    --to=vojtech@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liste@jordet.nu \
    --subject='Re: Mouse/Keyboard problems with 2.5.38' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).