From: Stephan von Krawczynski <skraw@ithnet.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-kernel@vger.kernel.org, davem@redhat.com
Subject: Re: 2.4.21-pre4: tg3 driver problems with shared interrupts
Date: Sun, 2 Feb 2003 18:09:38 +0100 [thread overview]
Message-ID: <20030202180938.0d265c2c.skraw@ithnet.com> (raw)
In-Reply-To: <3E3D4C08.2030300@pobox.com>
On Sun, 02 Feb 2003 11:49:12 -0500
Jeff Garzik <jgarzik@pobox.com> wrote:
> Stephan von Krawczynski wrote:
> > I found out within minutes that this setup does not survive if you let the
> > Broadcom cards share interrupts with anything else. It works ok now like
> > this (eth2 is tg3):
>
> [...]
> > But horribly failed in such a setup:
>
> [...]
> > I cannot even produce a "cat /proc/interrupts" for this because I am not fast
> > enough at login (the network at eth2 is heavy loaded). I sometimes read about
> > problems here with tg3-drivers, and I just wanted to point you to the shared
> > case, maybe it has to do with this special case rather than with the drivers
> > internals itself.
> > (PS: its not the ide2-3, I checked that out)
>
>
>
> hmmm. I've attached the latest tg3, version 1.4, which I just sent off
> to Marcelo. It includes some fixes that may affect your 5701.
Sorry, putting it into pre4 results in:
gcc -D__KERNEL__ -I/usr/src/linux-2.4.21-pre4-patch/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i686 -nostdinc -iwithprefix include -DKBUILD_BASENAME=tg3 -c -o tg3.o tg3.c
tg3.c:140: `PCI_DEVICE_ID_TIGON3_5704S' undeclared here (not in a function)
tg3.c:140: initializer element is not constant
tg3.c:140: (near initialization for `tg3_pci_tbl[8].device')
tg3.c:141: initializer element is not constant
tg3.c:141: (near initialization for `tg3_pci_tbl[8]')
tg3.c:142: `PCI_DEVICE_ID_TIGON3_5702A3' undeclared here (not in a function)
tg3.c:142: initializer element is not constant
tg3.c:142: (near initialization for `tg3_pci_tbl[9].device')
tg3.c:143: initializer element is not constant
tg3.c:143: (near initialization for `tg3_pci_tbl[9]')
tg3.c:144: `PCI_DEVICE_ID_TIGON3_5703A3' undeclared here (not in a function)
tg3.c:144: initializer element is not constant
tg3.c:144: (near initialization for `tg3_pci_tbl[10].device')
tg3.c:145: initializer element is not constant
tg3.c:145: (near initialization for `tg3_pci_tbl[10]')
tg3.c:147: initializer element is not constant
tg3.c:147: (near initialization for `tg3_pci_tbl[11]')
tg3.c:149: initializer element is not constant
tg3.c:149: (near initialization for `tg3_pci_tbl[12]')
tg3.c:151: initializer element is not constant
tg3.c:151: (near initialization for `tg3_pci_tbl[13]')
tg3.c:152: initializer element is not constant
tg3.c:152: (near initialization for `tg3_pci_tbl[14]')
make[3]: *** [tg3.o] Error 1
Shall I patch it, or do you?
--
Regards,
Stephan
next prev parent reply other threads:[~2003-02-02 17:00 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-02 15:18 2.4.21-pre4: tg3 driver problems with shared interrupts Stephan von Krawczynski
2003-02-02 16:49 ` Jeff Garzik
2003-02-02 17:09 ` Stephan von Krawczynski [this message]
2003-02-02 17:15 ` Jeff Garzik
2003-02-02 17:52 ` Stephan von Krawczynski
2003-02-02 18:28 ` Jeff Garzik
2003-02-02 18:31 ` Stephan von Krawczynski
2003-02-03 10:25 ` Stephan von Krawczynski
2003-02-05 9:48 ` 2.4.21-pre4: PDC ide " Stephan von Krawczynski
2003-02-05 11:16 ` Benjamin Herrenschmidt
2003-02-05 11:39 ` Stephan von Krawczynski
2003-02-05 12:21 ` Alan Cox
2003-02-05 12:22 ` Benjamin Herrenschmidt
2003-02-05 12:50 ` Alan Cox
2003-02-05 13:19 ` Stephan von Krawczynski
2003-02-05 12:24 ` Alan Cox
2003-02-05 16:56 ` Ross Biro
2003-02-05 17:12 ` Benjamin Herrenschmidt
2003-02-05 17:19 ` Ross Biro
2003-02-05 17:34 ` Benjamin Herrenschmidt
2003-02-05 17:38 ` Stephan von Krawczynski
[not found] ` <1044467091.685.155.camel@zion.wanadoo.fr>
2003-02-05 17:58 ` Stephan von Krawczynski
2003-02-05 20:00 ` Bryan Andersen
2003-02-05 19:10 ` Alan Cox
2003-02-06 12:20 ` Stephan von Krawczynski
2003-02-06 23:04 ` Benjamin Herrenschmidt
2003-02-07 9:10 ` Stephan von Krawczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030202180938.0d265c2c.skraw@ithnet.com \
--to=skraw@ithnet.com \
--cc=davem@redhat.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).