linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adam Belay <ambx1@neo.rr.com>
To: Jaroslav Kysela <perex@perex.cz>
Cc: linux-kernel@vger.kernel.org
Subject: [RFC][PATCH] PnP/ALSA - Manual Resource Setting Updates (2/3)
Date: Thu, 6 Mar 2003 22:52:44 +0000	[thread overview]
Message-ID: <20030306225244.GA28436@neo.rr.com> (raw)

Hi Jaroslav,

This patch updates the manual resource setting code to allow for partial manual 
setting of resources as needed by ALSA.

I would appreciate any comments.

Thanks,
Adam


diff -urN a/drivers/pnp/manager.c b/drivers/pnp/manager.c
--- a/drivers/pnp/manager.c	Mon Feb 24 19:05:46 2003
+++ b/drivers/pnp/manager.c	Thu Mar  6 15:16:30 2003
@@ -532,6 +532,39 @@
 	return error;
 }

+static void pnp_process_manual_resources(struct pnp_resource_table * ctab, struct pnp_resource_table * ntab)
+{
+	int idx;
+	for (idx = 0; idx < PNP_MAX_IRQ; idx++) {
+		if (ntab->irq_resource[idx].flags & IORESOURCE_AUTO)
+			continue;
+		ctab->irq_resource[idx].start = ntab->irq_resource[idx].start;
+		ctab->irq_resource[idx].end = ntab->irq_resource[idx].end;
+		ctab->irq_resource[idx].flags = ntab->irq_resource[idx].flags;
+	}
+	for (idx = 0; idx < PNP_MAX_DMA; idx++) {
+		if (ntab->dma_resource[idx].flags & IORESOURCE_AUTO)
+			continue;
+		ctab->dma_resource[idx].start = ntab->dma_resource[idx].start;
+		ctab->dma_resource[idx].end = ntab->dma_resource[idx].end;
+		ctab->dma_resource[idx].flags = ntab->dma_resource[idx].flags;
+	}
+	for (idx = 0; idx < PNP_MAX_PORT; idx++) {
+		if (ntab->port_resource[idx].flags & IORESOURCE_AUTO)
+			continue;
+		ctab->port_resource[idx].start = ntab->port_resource[idx].start;
+		ctab->port_resource[idx].end = ntab->port_resource[idx].end;
+		ctab->port_resource[idx].flags = ntab->port_resource[idx].flags;
+	}
+	for (idx = 0; idx < PNP_MAX_MEM; idx++) {
+		if (ntab->irq_resource[idx].flags & IORESOURCE_AUTO)
+			continue;
+		ctab->irq_resource[idx].start = ntab->mem_resource[idx].start;
+		ctab->irq_resource[idx].end = ntab->mem_resource[idx].end;
+		ctab->irq_resource[idx].flags = ntab->mem_resource[idx].flags;
+	}
+}
+
 /**
  * pnp_manual_config_dev - Disables Auto Config and Manually sets the resource table
  * @dev: pointer to the desired device
@@ -554,7 +587,7 @@
 	*bak = dev->res;
 
 	spin_lock(&pnp_lock);
-	dev->res = *res;
+	pnp_process_manual_resources(&dev->res, res);
 	if (!(mode & PNP_CONFIG_FORCE)) {
 		for (i = 0; i < PNP_MAX_PORT; i++) {
 			if(pnp_check_port(dev,i))
@@ -681,7 +714,7 @@
 		return -1;
 	}
 	dev->active = 0; /* just in case the protocol doesn't do this */
-	pnp_dbg("the device '%s' has been disabled.", dev->dev.bus_id);
+	pnp_dbg("res: the device '%s' has been disabled.", dev->dev.bus_id);
 	return 0;
 }
 
diff -urN a/drivers/pnp/resource.c b/drivers/pnp/resource.c
--- a/drivers/pnp/resource.c	Mon Feb 24 19:05:34 2003
+++ b/drivers/pnp/resource.c	Wed Mar  5 21:33:00 2003
@@ -558,25 +558,25 @@
 		table->irq_resource[idx].name = NULL;
 		table->irq_resource[idx].start = -1;
 		table->irq_resource[idx].end = -1;
-		table->irq_resource[idx].flags = 0;
+		table->irq_resource[idx].flags = IORESOURCE_AUTO;
 	}
 	for (idx = 0; idx < PNP_MAX_DMA; idx++) {
 		table->dma_resource[idx].name = NULL;
 		table->dma_resource[idx].start = -1;
 		table->dma_resource[idx].end = -1;
-		table->dma_resource[idx].flags = 0;
+		table->dma_resource[idx].flags = IORESOURCE_AUTO;
 	}
 	for (idx = 0; idx < PNP_MAX_PORT; idx++) {
 		table->port_resource[idx].name = NULL;
 		table->port_resource[idx].start = 0;
 		table->port_resource[idx].end = 0;
-		table->port_resource[idx].flags = 0;
+		table->port_resource[idx].flags = IORESOURCE_AUTO;
 	}
 	for (idx = 0; idx < PNP_MAX_MEM; idx++) {
 		table->mem_resource[idx].name = NULL;
 		table->mem_resource[idx].start = 0;
 		table->mem_resource[idx].end = 0;
-		table->mem_resource[idx].flags = 0;
+		table->mem_resource[idx].flags = IORESOURCE_AUTO;
 	}
 }
 

                 reply	other threads:[~2003-03-07  3:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030306225244.GA28436@neo.rr.com \
    --to=ambx1@neo.rr.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).