linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Frank <mflt1@micrologica.com.hk>
To: linux-kernel@vger.kernel.org
Subject: 2.4.21-pre7, 2.5.66, IDE Errors during boot - just a nuisance ?
Date: Thu, 10 Apr 2003 15:54:15 +0800	[thread overview]
Message-ID: <200304101552.25091.mflt1@micrologica.com.hk> (raw)

Noticed this for some time in 2.5.64 and up, and now also in 2.4.21-pre6 and pre7. It was OK 2.4.20. No functional problems were encountered  with 2.4.21, 2.5.6x so far.

Its a  P1, lspci follows

00:00.0 Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)


Apr 10 15:17:30 mhfl1 kernel: Linux version 2.4.21-pre7-mhf18-np (mhf@mhfl3) (gcc version 2.95.3 20010315 (release)) #2 

Apr 10 15:12:42 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
Apr 10 15:12:42 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 10 15:12:42 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1
Apr 10 15:12:42 mhfl1 kernel: PIIX3: chipset revision 0
Apr 10 15:12:42 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later
Apr 10 15:12:42 mhfl1 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
Apr 10 15:12:42 mhfl1 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Apr 10 15:12:42 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive
Apr 10 15:12:42 mhfl1 kernel: blk: queue c0347ae0, I/O limit 4095Mb (mask 0xffffffff)
Apr 10 15:12:42 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 10 15:12:43 mhfl1 kernel: hda: attached ide-disk driver.

------------------------------\/
Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error }
Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }

Apr 10 15:12:43 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=624/128/63, DMA
Apr 10 15:12:43 mhfl1 kernel: Partition check:
Apr 10 15:12:43 mhfl1 kernel:  hda: hda1 hda2 hda3

----------
Mar 30 15:46:51 mhfl1 kernel: Linux version 2.5.66-mhf2 (mhf@mhfl2) (gcc version 2.95.3 20010315 (release)) #12 Sat Mar 29 

Mar 30 15:47:05 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 30 15:47:05 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 30 15:47:05 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1
Mar 30 15:47:05 mhfl1 kernel: PIIX3: chipset revision 0
Mar 30 15:47:05 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later
Mar 30 15:47:05 mhfl1 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
Mar 30 15:47:05 mhfl1 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Mar 30 15:47:05 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive
Mar 30 15:47:05 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

------------------------------\/
Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }

Mar 30 15:47:05 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=4994/16/63, DMA
Mar 30 15:47:05 mhfl1 kernel:  hda: hda1 hda2 hda3

Regards
Michael


             reply	other threads:[~2003-04-10  7:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-04-10  7:54 Michael Frank [this message]
2003-04-10  8:02 ` 2.4.21-pre7, 2.5.66, IDE Errors during boot - just a nuisance ? Andre Hedrick
2003-04-10 11:00   ` Rob van Nieuwkerk
2003-04-11  7:39 ` Jarmo Järvenpää
2003-04-11  7:55   ` Michael Frank

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200304101552.25091.mflt1@micrologica.com.hk \
    --to=mflt1@micrologica.com.hk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).