* [2.5.68] Failed to execute binary (UML); binary compatibility broken?
@ 2003-04-23 18:48 Tomasz Torcz, BG
2003-04-24 7:20 ` Oleg Drokin
0 siblings, 1 reply; 2+ messages in thread
From: Tomasz Torcz, BG @ 2003-04-23 18:48 UTC (permalink / raw)
To: LKML
[-- Attachment #1: Type: text/plain, Size: 2051 bytes --]
Hi,
I've tried to run some specific executable in 2.5.67. This
executable worked fine with earlier[1] 2.5.x and 2.4.x kernels,
but it refuses to run with 2.5.67. I thought that it's temporary
problem and waited to 2.5.68 in hope, that it will be fixed.
But it won't work with 2.5.68 either.
[1] I did not test it on every earlier kernel. It have
stopped working somewhere in 2.5.6x series.
This binary is old Linux version 2.4.18-19um as UML executable.
It produces:
zdzichu@mth $ ./linux-2.4.18 eth0=tuntap,,,192.168.2.2 umid=balance mem=32M
tracing thread pid = 793
Linux version 2.4.18-19um (zdzichu@mother) (gcc version 2.95.3 20010315 (release)) #20 sob kwi 27 23:20:06 CEST 2002
On node 0 totalpages: 8192
zone(0): 0 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
Kernel command line: eth0=tuntap,,,192.168.2.2 umid=balance mem=32M root=/dev/ubd0
Calibrating delay loop... 362.52 BogoMIPS
Memory: 32244k available
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for host processor cmov support...Yes
Checking for host processor xmm support...No
Checking that ptrace can change system call numbers...OK
Checking that host ptys support output SIGIO...Yes
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Kernel panic: outer trampoline didn't exit with SIGKILL
------
Details of my host system setup are here:
http://fordon.pl.eu.org/~zdzichu/my_setup/
If I understand correctly, UML binary is ordinary executable.
So if it is unable to start, evidently something very important
is broken.
UML's kernel config attached.
Please CC me.
--
Tomasz Torcz RIP is irrevelant. Spoofing is futile.
zdzichu@irc.-nie.spam-.pl Your routes will be aggreggated.
[-- Attachment #2: config-balance --]
[-- Type: text/plain, Size: 7156 bytes --]
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_USERMODE=y
# CONFIG_ISA is not set
# CONFIG_SBUS is not set
# CONFIG_PCI is not set
CONFIG_UID16=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General Setup
#
CONFIG_STDIO_CONSOLE=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=128
CONFIG_SSL=y
# CONFIG_HOSTFS is not set
CONFIG_MCONSOLE=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_HOST_2G_2G is not set
CONFIG_UML_SMP=y
CONFIG_SMP=y
CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
CONFIG_CON_CHAN="xterm"
CONFIG_SSL_CHAN="pty"
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_KMOD=y
#
# Devices
#
CONFIG_BLK_DEV_UBD=y
CONFIG_BLK_DEV_UBD_SYNC=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_MMAPPER is not set
CONFIG_UML_SOUND=y
CONFIG_SOUND=y
CONFIG_HOSTAUDIO=y
CONFIG_FD_CHAN=y
CONFIG_NULL_CHAN=y
CONFIG_PORT_CHAN=y
CONFIG_PTY_CHAN=y
CONFIG_TTY_CHAN=y
CONFIG_XTERM_CHAN=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_IPSEC=y
CONFIG_IPSEC_IPIP=y
CONFIG_IPSEC_AH=y
CONFIG_IPSEC_AUTH_HMAC_MD5=y
CONFIG_IPSEC_AUTH_HMAC_SHA1=y
CONFIG_IPSEC_ESP=y
CONFIG_IPSEC_ENC_3DES=y
CONFIG_IPSEC_IPCOMP=y
# CONFIG_IPSEC_DEBUG is not set
#
# Network device support
#
CONFIG_UML_NET=y
CONFIG_UML_NET_ETHERTAP=y
CONFIG_UML_NET_TUNTAP=y
# CONFIG_UML_NET_SLIP is not set
# CONFIG_UML_NET_DAEMON is not set
# CONFIG_UML_NET_MCAST is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=y
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_AIRONET4500_CS is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUGSYM is not set
# CONFIG_PT_PROXY is not set
# CONFIG_GPROF is not set
# CONFIG_GCOV is not set
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [2.5.68] Failed to execute binary (UML); binary compatibility broken?
2003-04-23 18:48 [2.5.68] Failed to execute binary (UML); binary compatibility broken? Tomasz Torcz, BG
@ 2003-04-24 7:20 ` Oleg Drokin
0 siblings, 0 replies; 2+ messages in thread
From: Oleg Drokin @ 2003-04-24 7:20 UTC (permalink / raw)
To: Tomasz Torcz, BG, LKML
Hello!
On Wed, Apr 23, 2003 at 08:48:47PM +0200, Tomasz Torcz, BG wrote:
> Initializing RT netlink socket
> Kernel panic: outer trampoline didn't exit with SIGKILL
> If I understand correctly, UML binary is ordinary executable.
> So if it is unable to start, evidently something very important
> is broken.
> UML's kernel config attached.
This is known bug in UML. something related to sigchldhandler set to SIGIGN and
subsequent wait() call, as I remember.
The fix is exist and will be merged in next uml version.
Bye,
Oleg
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-04-24 7:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-23 18:48 [2.5.68] Failed to execute binary (UML); binary compatibility broken? Tomasz Torcz, BG
2003-04-24 7:20 ` Oleg Drokin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).