Another it87 patch.

["Zephaniah E. Hull" <warp@babylon.d2dc.net>]

[-- Attachment #1: Type: text/plain, Size: 2513 bytes --]

This is against my last.

While the old code most definitely did /something/ to the register for
setting the fan div, the 'what' is a more interesting question.

To be honest I could not figure out what it was trying to do, because
the way it was inserting values disagreed with not only the data sheet,
but how it parsed the very same register.

This corrects the issue, and allows one to properly control the divisor
on all 3 fans, including the (much more limited) 3rd fan.

-- 
	1024D/E65A7801 Zephaniah E. Hull <warp@babylon.d2dc.net>
	   92ED 94E4 B1E6 3624 226D  5727 4453 008B E65A 7801
	    CCs of replies from mailing lists are requested.

<Upholder> Seen on the back of a T-Shirt: "I am a bomb technician.  If you see
           me running, try to keep up."

--- old/drivers/i2c/chips/it87.c	2003-05-08 04:16:39.000000000 -0400
+++ new/drivers/i2c/chips/it87.c	2003-05-08 04:12:19.000000000 -0400
@@ -159,7 +159,14 @@
 				205-(val)*5)
 #define ALARMS_FROM_REG(val) (val)
 
-#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
+static int log2(int val)
+{
+    int answer = 0;
+    while ((val >>= 1))
+	answer++;
+    return answer;
+}
+#define DIV_TO_REG(val) log2(val)
 #define DIV_FROM_REG(val) (1 << (val))
 
 /* Initial limits. Use the config file to set better limits. */
@@ -520,10 +527,25 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
-	int old = it87_read_value(client, IT87_REG_FAN_DIV);
-	data->fan_div[nr] = DIV_TO_REG(val);
-	old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
-	it87_write_value(client, IT87_REG_FAN_DIV, old);
+	u8 old = it87_read_value(client, IT87_REG_FAN_DIV);
+
+	switch (nr) {
+	    case 0:
+	    case 1:
+		data->fan_div[nr] = DIV_TO_REG(val);
+		break;
+	    case 2:
+		if (val < 8)
+		    data->fan_div[nr] = 1;
+		else
+		    data->fan_div[nr] = 3;
+	}
+	val = old & 0x100;
+	val |= (data->fan_div[0] & 0x07);
+	val |= (data->fan_div[1] & 0x07) << 3;
+	if (data->fan_div[2] == 3)
+	    val |= 0x1 << 6;
+	it87_write_value(client, IT87_REG_FAN_DIV, val);
 	return count;
 }
 
@@ -957,7 +979,7 @@
 		i = it87_read_value(client, IT87_REG_FAN_DIV);
 		data->fan_div[0] = i & 0x07;
 		data->fan_div[1] = (i >> 3) & 0x07;
-		data->fan_div[2] = 1;
+		data->fan_div[2] = (i & 0x40) ? 3 : 1;
 
 		data->alarms =
 			it87_read_value(client, IT87_REG_ALARM1) |

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]