From: Willy Tarreau <willy@w.ods.org>
To: Willy Tarreau <willy@w.ods.org>
Cc: Marcelo Tosatti <marcelo@conectiva.com.br>,
lkml <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.4.21-rc3 : IDE pb on Alpha
Date: Sun, 25 May 2003 19:00:46 +0200 [thread overview]
Message-ID: <20030525170046.GA649@alpha.home.local> (raw)
In-Reply-To: <20030525173642.GA1365@alpha.home.local>
Hi again !
the system could boot without DMA. It displayed lots of messages, but it seems
to work :
Linux version 2.4.21-rc3 (root@alpha) (gcc version 3.2.3) #4 Sun May 25 19:16:43 CEST 2003
Booting on Tsunami variation Webbrick using machine vector Webbrick from SRM
Command line: root=/dev/hda2 console=tty0 console=ttyS0,9600 bootdevice=scd0 bootfile=2.4.21-rc3/vmlinux
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 32655
memcluster 2, usage 1, start 32655, end 32768
freeing pages 256:384
freeing pages 805:32655
reserving pages 805:806
On node 0 totalpages: 32655
zone(0): 32655 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 console=tty0 console=ttyS0,9600 bootdevice=scd0 bootfile=2.4.21-rc3/vmlinux
Using epoch = 1952
Console: colour VGA+ 80x25
Calibrating delay loop... 921.84 BogoMIPS
Memory: 252720k/261240k available (2094k kernel code, 6472k reserved, 451k data, 320k init)
Dentry cache hash table entries: 32768 (order: 6, 524288 bytes)
Inode cache hash table entries: 16384 (order: 5, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 65536 bytes)
Page-cache hash table entries: 32768 (order: 5, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: dev Adaptec AIC-7892A U160/m type 64-bit
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
srm_env: version 0.0.5 loaded successfully
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC AC23200L, ATA DISK drive
hdc: Maxtor 6Y120L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: host protected area => 1
hda: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=6296/16/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63
Partition check:
hda: hda1 hda2 hda3 hda7
hdc: hdc1
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue fffffc00002214e8, no I/O memory limit
Vendor: HP Model: C1537A Rev: L706
Type: Sequential-Access ANSI SCSI revision: 02
blk: queue fffffc00002216e8, no I/O memory limit
Vendor: COMPAQ Model: BD01864552 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue fffffc00002218e8, no I/O memory limit
Vendor: COMPAQ Model: BD01864552 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue fffffc0000221ae8, no I/O memory limit
Vendor: COMPAQ Model: BD01864552 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue fffffc0000221ce8, no I/O memory limit
Vendor: COMPAQ Model: BD01864552 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue fffffc000feee128, no I/O memory limit
------
After that, nothing special. I'm amazed by the number of "blk: queue..."
messages. This time, it only appears on SCSI, and not on IDE anymore.
So it seems as the IDE problem is in the ALI 1543 / DMA code. I have an old
K6/2 notebook somewhere with the same IDE controller, so I may retry on it.
I'm interested in any suggestion, of course ;-)
Willy
next prev parent reply other threads:[~2003-05-25 17:48 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-22 22:19 Linux 2.4.21-rc3 Marcelo Tosatti
2003-05-22 23:46 ` J.A. Magallon
2003-05-26 17:04 ` Alan Cox
2003-05-23 0:51 ` Barry K. Nathan
2003-05-23 5:32 ` Marc-Christian Petersen
2003-05-23 7:04 ` [BUG] 2.[45] ioperm fix seems broken (was Re: Linux 2.4.21-rc3) Barry K. Nathan
2003-05-23 9:00 ` Barry K. Nathan
2003-05-23 8:27 ` Linux 2.4.21-rc3 Benjamin Herrenschmidt
2003-05-23 13:38 ` Linux 2.4.21-rc3 - ipmi unresolved Eyal Lebedinsky
2003-05-23 13:41 ` Marc-Christian Petersen
2003-05-26 2:09 ` Corey Minyard
2003-05-25 7:57 ` Keith Owens
2003-05-26 3:37 ` Corey Minyard
2003-05-26 3:54 ` Keith Owens
2003-05-27 0:30 ` Corey Minyard
2003-05-27 3:09 ` Keith Owens
2003-05-27 4:45 ` Registering for notifier chains in modules (was Linux 2.4.21-rc3 - ipmi unresolved) Corey Minyard
2003-05-27 5:30 ` Keith Owens
2003-05-27 14:48 ` Corey Minyard
2003-05-27 16:02 ` viro
2003-05-27 17:09 ` Corey Minyard
2003-05-28 0:15 ` Keith Owens
2003-05-26 17:08 ` Linux 2.4.21-rc3 - ipmi unresolved Alan Cox
2003-05-23 21:10 ` Linux 2.4.21-rc3 [net-pf-4, devfs audio, drm radeon] Gabor Z. Papp
2003-05-25 17:36 ` Linux 2.4.21-rc3 : IDE pb on Alpha Willy Tarreau
2003-05-25 17:00 ` Willy Tarreau [this message]
2003-05-25 20:37 ` Mike Fedyk
2003-05-25 20:45 ` Bartlomiej Zolnierkiewicz
2003-05-25 20:55 ` Mike Fedyk
2003-05-25 21:23 ` Bartlomiej Zolnierkiewicz
2003-05-26 7:28 ` Linux 2.4.21-rc3: doesn't build with CONFIG_BLK_DEV_HD_ONLY=y Jerome Chantelauze
2003-05-26 13:16 ` Linux 2.4.21-rc3 Santiago Garcia Mantinan
2003-05-27 1:14 ` Jeff Chua
2003-05-27 3:37 Linux 2.4.21-rc3 : IDE pb on Alpha Jason Papadopoulos
2003-05-27 4:53 ` Willy Tarreau
2003-05-27 9:40 ` Ivan Kokshaysky
2003-05-27 12:31 ` Willy Tarreau
2003-05-27 14:04 ` Ivan Kokshaysky
2003-05-27 14:37 ` Willy Tarreau
2003-05-28 0:38 ` Willy Tarreau
2003-05-28 1:41 ` Jason Papadopoulos
2003-05-28 3:12 ` Jeff Garzik
2003-05-29 0:35 ` Jason Papadopoulos
2003-05-29 1:10 ` Jeff Garzik
2003-05-28 14:45 ` Ivan Kokshaysky
2003-05-31 15:24 ` Ben Collins
2003-06-01 18:40 ` Ivan Kokshaysky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030525170046.GA649@alpha.home.local \
--to=willy@w.ods.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).