linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ruben Puettmann <ruben@puettmann.net>
To: linux-kernel@vger.kernel.org
Subject: Problems with usb-ohci on 2.4.22-preX
Date: Sat, 12 Jul 2003 16:14:31 +0200	[thread overview]
Message-ID: <20030712141431.GA3240@puettmann.net> (raw)


        hy,

i try to install linux on my new motherboard EPOX 8RDA3+ 
with nvidia nforce2 chipset.

If I try to attached some usb devices ( usb memory stick ) I got this
errors ( 2.4.22-pre5 pre2..): 


PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 00:02.2: irq 20, pci mem f88eb000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xf88f3000, IRQ 20
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xf88f5000, IRQ 22
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 15:11:40 Jul 12 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:02.1-3, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:02.1-3, assigned address 3
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
eth0: Setting 10mbps full-duplex based on auto-negotiated partner ability 4461.
eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 292 bytes per conntrack
hub.c: new USB device 00:02.0-3, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: unable to get device descriptor (error=-12)
hub.c: new USB device 00:02.0-3, assigned address 3
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: new USB device 00:02.1-2, assigned address 4
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: new USB device 00:02.1-2, assigned address 5
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=5 (error=-110)

This happend's with usb-ohci and usb-ehci loaded or only with usb-ohci.


        thanks for help 

                Ruben


-- 
Ruben Puettmann
ruben@puettmann.net
http://www.puettmann.net

             reply	other threads:[~2003-07-12 14:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-12 14:14 Ruben Puettmann [this message]
2003-07-13  4:21 ` Problems with usb-ohci on 2.4.22-preX Greg KH
2003-07-13  8:04   ` Ruben Puettmann
2003-07-15 13:47 ` Roger Larsson
2003-07-15 18:34   ` [linux-usb-devel] " David Brownell
2003-07-15 19:22     ` Greg KH
2003-07-15 19:42       ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030712141431.GA3240@puettmann.net \
    --to=ruben@puettmann.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).