* Matrox Millenium and framebuffer
@ 2003-07-15 19:35 Jean-Luc Coulon (f5ibh)
2003-07-15 19:51 ` Re : " Jean-Luc Coulon (f5ibh)
2003-07-15 19:55 ` nick black
0 siblings, 2 replies; 3+ messages in thread
From: Jean-Luc Coulon (f5ibh) @ 2003-07-15 19:35 UTC (permalink / raw)
To: linux-kernel
Hi,
I've a Matrox Millenium card and I want to run the framebuffer.
I've set the following configuration :
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G450 is not set
# CONFIG_FB_MATROX_G100A is not set
CONFIG_FB_MATROX_PROC=m
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
And I pass the parameter video=matrox to the kernel.
I tried video=matrox:vesa=<something> without any success.
Here are the boot lines from dmesg :
[root@tangerine] /usr/src/linux/drivers/video/matrox # dmesg | more
Linux version 2.4.21 (root@tangerine) (version gcc 3.3.1 20030626
(Debian prerel
ease)) #1 mar jui 15 18:40:01 CEST 2003 matroxfb_Ti3026.c
BIOS-provided physical RAM map:50.h matroxfb_Ti3026.h
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)s
matroxfb_base.c BIOS-e820: 0000000000100000 - 0000000017ffc000
(usable)ess /boot/
config
BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)s /boot/
config-2.4.21 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98300
zone(0): 4096 pages.
zone(1): 94204 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 reboot=warm hdc=ide-scsi hdd=ide-
scsi pci=bi
osirq video=matrox
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 501.160 MHz processor.
Console: colour VGA+ 80x25
If I compile a vesa framebuffer, it works but not accelerated.
---
Regards
Jean-Luc
----------------------------------------------------------------------------
Jean-Luc Coulon
28 rue d'Evette
90350 Evette-Salbert
FRANCE
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re : Matrox Millenium and framebuffer
2003-07-15 19:35 Matrox Millenium and framebuffer Jean-Luc Coulon (f5ibh)
@ 2003-07-15 19:51 ` Jean-Luc Coulon (f5ibh)
2003-07-15 19:55 ` nick black
1 sibling, 0 replies; 3+ messages in thread
From: Jean-Luc Coulon (f5ibh) @ 2003-07-15 19:51 UTC (permalink / raw)
To: Jean-Luc Coulon (f5ibh); +Cc: linux-kernel
My fault : I was testing 2 matrox cards and the one in the box was a
mystique...
---
Cheers
Jean-Luc
On 15.07.2003 21:35, Jean-Luc Coulon (f5ibh) wrote:
> Hi,
>
> I've a Matrox Millenium card and I want to run the framebuffer.
> I've set the following configuration :
>
> # Frame-buffer support
> #
> CONFIG_FB=y
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_CLGEN is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_VESA is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_HGA is not set
> CONFIG_VIDEO_SELECT=y
> CONFIG_FB_MATROX=y
> CONFIG_FB_MATROX_MILLENIUM=y
> # CONFIG_FB_MATROX_MYSTIQUE is not set
> # CONFIG_FB_MATROX_G450 is not set
> # CONFIG_FB_MATROX_G100A is not set
> CONFIG_FB_MATROX_PROC=m
> # CONFIG_FB_MATROX_MULTIHEAD is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_FBCON_ADVANCED=y
> CONFIG_FBCON_MFB=y
> # CONFIG_FBCON_CFB2 is not set
> # CONFIG_FBCON_CFB4 is not set
> CONFIG_FBCON_CFB8=y
> CONFIG_FBCON_CFB16=y
> CONFIG_FBCON_CFB24=y
> CONFIG_FBCON_CFB32=y
> # CONFIG_FBCON_AFB is not set
> # CONFIG_FBCON_ILBM is not set
> # CONFIG_FBCON_IPLAN2P2 is not set
> # CONFIG_FBCON_IPLAN2P4 is not set
> # CONFIG_FBCON_IPLAN2P8 is not set
> # CONFIG_FBCON_MAC is not set
>
>
> And I pass the parameter video=matrox to the kernel.
> I tried video=matrox:vesa=<something> without any success.
>
> Here are the boot lines from dmesg :
>
> [root@tangerine] /usr/src/linux/drivers/video/matrox # dmesg | more
> Linux version 2.4.21 (root@tangerine) (version gcc 3.3.1 20030626
> (Debian prerel
> ease)) #1 mar jui 15 18:40:01 CEST 2003 matroxfb_Ti3026.c
> BIOS-provided physical RAM map:50.h matroxfb_Ti3026.h
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)s
> matroxfb_base.c BIOS-e820: 0000000000100000 - 0000000017ffc000
> (usable)ess /boot/
> config
> BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
> BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)s /boot/
> config-2.4.21 BIOS-e820: 00000000ffff0000 - 0000000100000000
> (reserved)
> 383MB LOWMEM available.
> On node 0 totalpages: 98300
> zone(0): 4096 pages.
> zone(1): 94204 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/hda2 reboot=warm hdc=ide-scsi hdd=ide-
> scsi pci=bi
> osirq video=matrox
> ide_setup: hdc=ide-scsi
> ide_setup: hdd=ide-scsi
> Initializing CPU#0
> Detected 501.160 MHz processor.
> Console: colour VGA+ 80x25
>
> If I compile a vesa framebuffer, it works but not accelerated.
>
> ---
> Regards
> Jean-Luc
>
> ----------------------------------------------------------------------------
> Jean-Luc Coulon
> 28 rue d'Evette
> 90350 Evette-Salbert
> FRANCE
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Matrox Millenium and framebuffer
2003-07-15 19:35 Matrox Millenium and framebuffer Jean-Luc Coulon (f5ibh)
2003-07-15 19:51 ` Re : " Jean-Luc Coulon (f5ibh)
@ 2003-07-15 19:55 ` nick black
1 sibling, 0 replies; 3+ messages in thread
From: nick black @ 2003-07-15 19:55 UTC (permalink / raw)
To: linux-kernel
In article <20030715193545.GA1024@tangerine>, Jean-Luc Coulon (f5ibh) wrote:
> And I pass the parameter video=matrox to the kernel.
> I tried video=matrox:vesa=<something> without any success.
at a minimum, you'll need to provide "matroxfb" rather than "matrox".
--
nick black <dank@reflexsecurity.com>
"np: nondeterministic polynomial-time
the class of dashed hopes and idle dreams." - the complexity zoo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-07-15 19:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-15 19:35 Matrox Millenium and framebuffer Jean-Luc Coulon (f5ibh)
2003-07-15 19:51 ` Re : " Jean-Luc Coulon (f5ibh)
2003-07-15 19:55 ` nick black
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).