From: Wil Reichert <wilreichert@yahoo.com>
To: linux-kernel@vger.kernel.org
Subject: kernel 2.6.0-test1 snd-ice1724 module OOPS
Date: Wed, 16 Jul 2003 11:51:56 -0400 [thread overview]
Message-ID: <20030716115156.2b5a1992.wilreichert@yahoo.com> (raw)
I get the following OOPS when loading the snd-ice1724 module for my Envy 24HT card. Works fine if I build all the alsa code straight into the kernel.
Wil
Unable to handle kernel paging request at virtual address e4b11000
e4b11000
*pde = 1fe3a067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<e4b11000>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: fffffff4 ebx: deb2ce14 ecx: ddc18e8c edx: deb2ce0c
esi: deb2c018 edi: df19d04f ebp: dd993e74 esp: dd993e54
ds: 007b es: 007b ss: 0068
Stack: e4b0500a deb2ce14 e4b056c0 e4b05760 deb2c018 e4b2cd60 e4b05880 e4b2979d
dd993eb4 e4b04e8e deb2c018 c15e0800 dd993ea4 00000000 00000000 dd993eac
c017a8a2 dd993e9c df19d038 df19d014 deb2c018 e4b2cd60 ffffffed c15e0800
Call Trace:
[<e4b0500a>] revo_init+0x8a/0x130 [snd_ice1724]
[<e4b04e8e>] snd_vt1724_probe+0x28e/0x2c0 [snd_ice1724]
[<c017a8a2>] sysfs_new_inode+0x62/0xb0
[<c01d242b>] pci_device_probe_static+0x4b/0x60
[<c01d258c>] __pci_device_probe+0x3c/0x50
[<c01d25cf>] pci_device_probe+0x2f/0x50
[<c0207413>] bus_match+0x43/0x70
[<c020751d>] driver_attach+0x5d/0x70
[<c02077af>] bus_add_driver+0x8f/0xb0
[<c0207c11>] driver_register+0x31/0x40
[<c01d289f>] pci_register_driver+0x6f/0xa0
[<e4b04ed5>] alsa_card_ice1724_init+0x15/0x50 [snd_ice1724]
[<c012ecd8>] sys_init_module+0x108/0x220
[<c010923f>] syscall_call+0x7/0xb
Code: Bad EIP value.
>>EIP; e4b11000 <__crc_d_find_alias+9699e/32742c> <=====
>>eax; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
>>ebx; deb2ce14 <__crc_totalram_pages+1f6d5a/218da2>
>>ecx; ddc18e8c <__crc_ide_build_dmatable+151146/6d7e01>
>>edx; deb2ce0c <__crc_totalram_pages+1f6d52/218da2>
>>esi; deb2c018 <__crc_totalram_pages+1f5f5e/218da2>
>>edi; df19d04f <__crc_pci_dev_driver+166363/34a945>
>>ebp; dd993e74 <__crc_notify_parent+68ab4/19c986>
>>esp; dd993e54 <__crc_notify_parent+68a94/19c986>
Trace; e4b0500a <__crc_d_find_alias+8a9a8/32742c>
Trace; e4b04e8e <__crc_d_find_alias+8a82c/32742c>
Trace; c017a8a2 <sysfs_new_inode+62/b0>
Trace; c01d242b <pci_device_probe_static+4b/60>
Trace; c01d258c <__pci_device_probe+3c/50>
Trace; c01d25cf <pci_device_probe+2f/50>
Trace; c0207413 <bus_match+43/70>
Trace; c020751d <driver_attach+5d/70>
Trace; c02077af <bus_add_driver+8f/b0>
Trace; c0207c11 <driver_register+31/40>
Trace; c01d289f <pci_register_driver+6f/a0>
Trace; e4b04ed5 <__crc_d_find_alias+8a873/32742c>
Trace; c012ecd8 <sys_init_module+108/220>
Trace; c010923f <syscall_call+7/b>
Linux darwin.goathorde.org 2.6.0-test1 #1 Mon Jul 14 12:49:48 EDT 2003 i686 GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34-WIP
xfsprogs 2.5.3
quota-tools 3.09.
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.9
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec snd_pcm snd_page_alloc snd_timer snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd soundcore nls_iso8859_1 nls_cp437 dm_mod w83781d i2c_sensor i2c_core
00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=32]
Capabilities: <available only to root>
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at dd083000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 4
Region 0: Memory at dd081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 3
Region 0: Memory at dd082000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <available only to root>
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: nVidia Corporation: Unknown device 4144
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at d000 [size=128]
Region 2: Memory at dd084000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: db000000-dcffffff
Prefetchable memory behind bridge: d8000000-d8ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: <available only to root>
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d9000000-daffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:07.0 Multimedia audio controller: IC Ensemble Inc ICE1724 [Envy24HT] (rev 01)
Subsystem: IC Ensemble Inc: Unknown device 3630
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9000 [size=32]
Region 1: I/O ports at 9400 [size=128]
Capabilities: <available only to root>
01:08.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Subsystem: Netgear: Unknown device 4105
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
01:09.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9800 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: <available only to root>
01:0b.0 RAID bus controller: Triones Technologies, Inc. HPT372A (rev 02)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at bc00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd R250 If [Radeon 9000 Pro "Evil Commando"]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01)
Subsystem: C.P. Technology Co. Ltd: Unknown device 2038
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at d4000000 (32-bit, prefetchable) [disabled] [size=64M]
Region 1: Memory at da010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <available only to root>
next reply other threads:[~2003-07-16 15:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-16 15:51 Wil Reichert [this message]
2003-07-17 9:45 ` kernel 2.6.0-test1 snd-ice1724 module OOPS Takashi Iwai
2003-07-17 11:25 ` Wil Reichert
2003-07-17 11:37 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030716115156.2b5a1992.wilreichert@yahoo.com \
--to=wilreichert@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).