* PATCH: more typo fixes
@ 2003-07-27 19:56 Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2003-07-27 19:56 UTC (permalink / raw)
To: linux-kernel, torvalds
(Steven Cole)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/arch/cris/arch-v10/lib/old_checksum.c linux-2.6.0-test2-ac1/arch/cris/arch-v10/lib/old_checksum.c
--- linux-2.6.0-test2/arch/cris/arch-v10/lib/old_checksum.c 2003-07-10 21:13:04.000000000 +0100
+++ linux-2.6.0-test2-ac1/arch/cris/arch-v10/lib/old_checksum.c 2003-07-23 16:39:58.000000000 +0100
@@ -75,7 +75,7 @@
sum += *((unsigned short *)buff)++;
}
if(endMarker - buff > 0) {
- sum += *buff; /* add extra byte seperately */
+ sum += *buff; /* add extra byte separately */
}
BITOFF;
return(sum);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/arch/cris/mm/fault.c linux-2.6.0-test2-ac1/arch/cris/mm/fault.c
--- linux-2.6.0-test2/arch/cris/mm/fault.c 2003-07-10 21:14:10.000000000 +0100
+++ linux-2.6.0-test2-ac1/arch/cris/mm/fault.c 2003-07-23 16:39:58.000000000 +0100
@@ -8,7 +8,7 @@
* $Log: fault.c,v $
* Revision 1.8 2003/07/04 13:02:48 tobiasa
* Moved code snippet from arch/cris/mm/fault.c that searches for fixup code
- * to seperate function in arch-specific files.
+ * to separate function in arch-specific files.
*
* Revision 1.7 2003/01/22 06:48:38 starvik
* Fixed warnings issued by GCC 3.2.1
^ permalink raw reply [flat|nested] 2+ messages in thread* PATCH: more typo fixes
@ 2003-07-27 20:06 Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2003-07-27 20:06 UTC (permalink / raw)
To: linux-kernel, torvalds
(Steven Cole)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/drivers/media/video/zr36120.c linux-2.6.0-test2-ac1/drivers/media/video/zr36120.c
--- linux-2.6.0-test2/drivers/media/video/zr36120.c 2003-07-10 21:09:33.000000000 +0100
+++ linux-2.6.0-test2-ac1/drivers/media/video/zr36120.c 2003-07-15 18:01:29.000000000 +0100
@@ -488,7 +488,7 @@
vcp->width < 0 || (uint)(vcp->x+vcp->width) > ztv->overinfo.w ||
vcp->height < 0 || (vcp->y+vcp->height) > ztv->overinfo.h)
{
- DEBUG(printk(CARD_DEBUG "illegal clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h));
+ DEBUG(printk(CARD_DEBUG "invalid clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h));
if (vcp->x < 0) vcp->x = 0;
if ((uint)vcp->x > ztv->overinfo.w) vcp->x = ztv->overinfo.w;
if (vcp->y < 0) vcp->y = 0;
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/drivers/mtd/maps/elan-104nc.c linux-2.6.0-test2-ac1/drivers/mtd/maps/elan-104nc.c
--- linux-2.6.0-test2/drivers/mtd/maps/elan-104nc.c 2003-07-10 21:09:03.000000000 +0100
+++ linux-2.6.0-test2-ac1/drivers/mtd/maps/elan-104nc.c 2003-07-23 16:39:58.000000000 +0100
@@ -27,7 +27,7 @@
16 bit I/O port (0x22) for some sort of paging.
-The single flash device is divided into 3 partition which appear as seperate
+The single flash device is divided into 3 partition which appear as separate
MTD devices.
Linux thinks that the I/O port is used by the PIC and hence check_region() will
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/drivers/mtd/maps/scb2_flash.c linux-2.6.0-test2-ac1/drivers/mtd/maps/scb2_flash.c
--- linux-2.6.0-test2/drivers/mtd/maps/scb2_flash.c 2003-07-10 21:10:50.000000000 +0100
+++ linux-2.6.0-test2-ac1/drivers/mtd/maps/scb2_flash.c 2003-07-23 16:39:58.000000000 +0100
@@ -31,17 +31,17 @@
*
* The actual BIOS layout has been mostly reverse engineered. Intel BIOS
* updates for this board include 10 related (*.bio - &.bi9) binary files and
- * another seperate (*.bbo) binary file. The 10 files are 64k of data + a
+ * another separate (*.bbo) binary file. The 10 files are 64k of data + a
* small header. If the headers are stripped off, the 10 64k files can be
* concatenated into a 640k image. This is your BIOS image, proper. The
- * seperate .bbo file also has a small header. It is the 'Boot Block'
+ * separate .bbo file also has a small header. It is the 'Boot Block'
* recovery BIOS. Once the header is stripped, no further prep is needed.
* As best I can tell, the BIOS is arranged as such:
* offset 0x00000 to 0x4ffff (320k): unknown - SCSI BIOS, etc?
* offset 0x50000 to 0xeffff (640k): BIOS proper
* offset 0xf0000 ty 0xfffff (64k): Boot Block region
*
- * Intel's BIOS update program flashes the BIOS and Boot Block in seperate
+ * Intel's BIOS update program flashes the BIOS and Boot Block in separate
* steps. Probably a wise thing to do.
*/
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test2/drivers/net/eepro.c linux-2.6.0-test2-ac1/drivers/net/eepro.c
--- linux-2.6.0-test2/drivers/net/eepro.c 2003-07-10 21:12:49.000000000 +0100
+++ linux-2.6.0-test2-ac1/drivers/net/eepro.c 2003-07-15 18:01:29.000000000 +0100
@@ -819,7 +819,7 @@
}
}
if (dev->irq < 2) {
- printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
+ printk(KERN_ERR " Duh! invalid interrupt vector stored in EEPROM.\n");
retval = -ENODEV;
goto freeall;
} else
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-07-28 2:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-27 19:56 PATCH: more typo fixes Alan Cox
2003-07-27 20:06 Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).