Linux version 2.6.0-test2-nevyn (root@nevyn) (gcc version 3.3.1 20030722 (Debian prerelease)) #1 SMP Sun Jul 27 18:47:27 EDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f5610 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 VIA694 ) @ 0x000f6f60 ACPI: RSDT (v001 VIA694 AWRDACPI 16944.11825) @ 0x3fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 16944.11825) @ 0x3fff3040 ACPI: MADT (v001 VIA694 00000.00000) @ 0x3fff56c0 ACPI: DSDT (v001 VIA694 AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: root=/dev/md0 video=aty128fb:1024x768-16@70 console=ttyS1,115200 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 998.352 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1966.08 BogoMIPS Memory: 903388k/917504k available (2663k kernel code, 13340k reserved, 985k data, 240k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 730.97 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1994.75 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3960.83 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 998.0255 MHz. ..... host bus clock speed is 133.0100 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 2 Initializing RT netlink socket PCI: BIOS32 Service Directory structure at 0xc00faed0 PCI: BIOS32 Service Directory entry at 0xfb340 PCI: BIOS probe returned s=00 hw=11 ver=02.10 l=01 PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030714 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: IDE base address fixup for 0000:00:07.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.96 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd80 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbdb0, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: ACPI tables contain no PCI IRQ routing entries PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Peer bridge fixup PCI: IRQ init PCI: Interrupt Routing Table found at 0xc00fdbc0 00:09 slot=01 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:0a slot=02 0:02/deb8 1:05/deb8 2:03/deb8 3:01/deb8 00:0b slot=03 0:02/deb8 1:01/deb8 2:05/deb8 3:03/deb8 00:0c slot=04 0:05/deb8 1:01/deb8 2:02/deb8 3:03/deb8 00:0d slot=05 0:03/deb8 1:05/deb8 2:01/deb8 3:02/deb8 00:0e slot=06 0:03/deb8 1:05/deb8 2:01/deb8 3:02/deb8 00:01 slot=00 0:01/deb8 1:02/deb8 2:03/deb8 3:05/deb8 00:07 slot=00 0:00/deb8 1:00/deb8 2:03/deb8 3:05/deb8 PCI: Attempting to find IRQ router for 1106:0596 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 PCI: IRQ fixup PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! PCI: Allocating resources PCI: Resource d0000000-d3ffffff (f=1208, d=0, p=0) PCI: Resource 00009000-0000900f (f=101, d=0, p=0) PCI: Resource 00009400-0000941f (f=101, d=0, p=0) PCI: Resource 00009800-0000981f (f=101, d=0, p=0) PCI: Resource 00009c00-00009cff (f=101, d=0, p=0) PCI: Resource d9044000-d9044fff (f=204, d=0, p=0) PCI: Resource 0000a000-0000a0ff (f=101, d=0, p=0) PCI: Resource d9045000-d90450ff (f=200, d=0, p=0) PCI: Resource 0000a400-0000a4ff (f=101, d=0, p=0) PCI: Resource d9046000-d90460ff (f=200, d=0, p=0) PCI: Resource d9000000-d903ffff (f=200, d=0, p=0) PCI: Resource 0000a800-0000a807 (f=101, d=0, p=0) PCI: Resource 0000ac00-0000ac07 (f=101, d=0, p=0) PCI: Resource d4000000-d7ffffff (f=1208, d=0, p=0) PCI: Resource 0000b000-0000b0ff (f=101, d=0, p=0) PCI: Resource d9040000-d9043fff (f=200, d=0, p=0) PCI: Resource 0000b400-0000b407 (f=101, d=0, p=0) PCI: Resource 0000b800-0000b803 (f=101, d=0, p=0) PCI: Resource 0000bc00-0000bc07 (f=101, d=0, p=0) PCI: Resource 0000c000-0000c003 (f=101, d=0, p=0) PCI: Resource 0000c400-0000c4ff (f=101, d=0, p=0) PCI: Sorting device list... aty128fb: Invalid ROM signature 0 aty128fb: BIOS not located, guessing timings. aty128fb: Rage128 RE (PCI) [chip rev 0x2] 16M 128-bit SDR SGRAM (1:1) fb0: ATY Rage128 frame buffer device on Rage128 RE (PCI) aty128fb: Rage128 MTRR set to ON Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Starting balanced_irq Enabling SEP on CPU 1 Enabling SEP on CPU 0 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). PCI: Enabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 64M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1. eth0: Lite-On 82c168 PNIC rev 32 at 0xa000, 00:A0:CC:D6:AC:E1, IRQ 12. tulip1: EEPROM default media type 10baseT-FDX. tulip1: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip1: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. tulip1: Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block. tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block. eth1: Macronix 98713 PMAC rev 0 at 0xa400, 00:40:33:A3:12:82, IRQ 12. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 92049U6, ATA DISK drive hda: IRQ probe failed (0xfffffdba) hdb: Hewlett-Packard DVD Writer 300, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: WDC WD800BB-00CAA1, ATA DISK drive hdc: IRQ probe failed (0xffffbdba) ide1 at 0x170-0x177,0x376 on irq 15 HPT370A: IDE controller at PCI slot 0000:00:0e.0 HPT370A: chipset revision 4 HPT37X: using 33MHz PCI clock HPT370A: 100% native mode on irq 10 ide2: BM-DMA at 0xc400-0xc407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xc408-0xc40f, BIOS settings: hdg:pio, hdh:pio hde: WDC WD800BB-00CAA1, ATA DISK drive ide2 at 0xb400-0xb407,0xb802 on irq 10 hdg: WDC WD800BB-00CAA1, ATA DISK drive ide3 at 0xbc00-0xbc07,0xc002 on irq 10 hda: max request size: 128KiB hda: host protected area => 1 hda: 39882528 sectors (20420 MB) w/2048KiB Cache, CHS=39566/16/63, UDMA(66) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3 hdc: max request size: 128KiB hdc: host protected area => 1 hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100) /dev/ide/host0/bus1/target0/lun0: p1 < p5 > p2 hde: max request size: 128KiB hde: lost interrupt hde: lost interrupt hde: lost interrupt hde: host protected area => 1 hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100) /dev/ide/host2/bus0/target0/lun0:<4>hde: dma_timer_expiry: dma status == 0x24 hde: 0 bytes in FIFO hde: DMA interrupt recovery hde: lost interrupt p1 p2 hdg: max request size: 128KiB hdg: lost interrupt hdg: lost interrupt hdg: lost interrupt hdg: host protected area => 1 hdg: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100) /dev/ide/host2/bus1/target0/lun0:<4>hdg: dma_timer_expiry: dma status == 0x24 hdg: 0 bytes in FIFO hdg: DMA interrupt recovery hdg: lost interrupt p1 p2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1 scsi0: Unexpected busfree while idle SEQADDR == 0x1