From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S272061AbTG2UBk (ORCPT ); Tue, 29 Jul 2003 16:01:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S272126AbTG2UBk (ORCPT ); Tue, 29 Jul 2003 16:01:40 -0400 Received: from hermes.fachschaften.tu-muenchen.de ([129.187.202.12]:4588 "HELO hermes.fachschaften.tu-muenchen.de") by vger.kernel.org with SMTP id S272061AbTG2T7s (ORCPT ); Tue, 29 Jul 2003 15:59:48 -0400 Date: Tue, 29 Jul 2003 21:59:33 +0200 From: Adrian Bunk To: linux-kernel@vger.kernel.org Subject: [2.6 patch] let broken drivers depend on BROKEN{,ON_SMP} Message-ID: <20030729195932.GR28767@fs.tum.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The patch below against 2.6.0-test2 does the following: - let all drivers that don't compile depend on an undefined CONFIG_BROKEN - let all drivers that don't compile on SMP (due to cli/sti usage) depend on a CONFIG_BROKEN_ON_SMP that is only defined if !CONFIG_SMP Notes: - I might have missed a few drivers, I found the drivers below by trying to compile as many drivers as possible statically on i386 - I added in two drivers an #include for the dummy cli/sti #define's on !SMP to allow the compilation on UP - as an example I converted the CONFIG_BLK_DEV_IDETAPE entry from a dep_tristate comment to a full Kconfig entry with a dependency on CONFIG_BROKEN (help text stolen from 2.4) - I do prefer BROKEN, Alan prefers OBSOLETE a s/BROKEN/OBSOLETE/g is acceptable for me I'm not sure whether now or later in the 2.6.0-test phase is the right time to apply this patch. diffstat output: drivers/atm/Kconfig | 4 ++-- drivers/cdrom/Kconfig | 8 ++++---- drivers/char/Kconfig | 31 ++++++++++++++++--------------- drivers/char/epca.c | 1 + drivers/char/generic_serial.c | 1 + drivers/i2c/Kconfig | 2 +- drivers/ide/Kconfig | 26 +++++++++++++++++++++++++- drivers/isdn/Kconfig | 2 +- drivers/isdn/hardware/avm/Kconfig | 12 ++++++------ drivers/isdn/hisax/Kconfig | 2 ++ drivers/isdn/i4l/Kconfig | 1 + drivers/media/video/Kconfig | 4 ++-- drivers/mtd/devices/Kconfig | 2 +- drivers/net/Kconfig | 16 ++++++++-------- drivers/net/hamradio/Kconfig | 6 +++--- drivers/net/irda/Kconfig | 2 +- drivers/net/tulip/Kconfig | 2 +- drivers/net/wan/Kconfig | 8 ++++---- drivers/scsi/Kconfig | 20 ++++++++++---------- drivers/video/Kconfig | 6 +++--- fs/partitions/Kconfig | 1 + init/Kconfig | 4 ++++ sound/oss/Kconfig | 2 +- 23 files changed, 99 insertions(+), 64 deletions(-) cu Adrian --- linux-2.6.0-test2-full/drivers/net/tulip/Kconfig.old 2003-07-29 10:09:53.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/net/tulip/Kconfig 2003-07-29 10:10:34.000000000 +0200 @@ -131,7 +131,7 @@ config PCMCIA_XIRTULIP tristate "Xircom Tulip-like CardBus support (old driver)" - depends on NET_TULIP && CARDBUS + depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP ---help--- This driver is for the Digital "Tulip" Ethernet CardBus adapters. It should work with most DEC 21*4*-based chips/ethercards, as well --- linux-2.6.0-test2-full/drivers/net/irda/Kconfig.old 2003-07-29 09:39:46.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/net/irda/Kconfig 2003-07-29 09:40:19.000000000 +0200 @@ -270,7 +270,7 @@ config TOSHIBA_OLD tristate "Toshiba Type-O IR Port (old driver)" - depends on IRDA + depends on IRDA && BROKEN_ON_SMP help Say Y here if you want to build support for the Toshiba Type-O IR chipset. This chipset is used by the Toshiba Libretto 100CT, and --- linux-2.6.0-test2-full/drivers/net/wan/Kconfig.old 2003-07-28 22:23:19.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/net/wan/Kconfig 2003-07-29 10:11:46.000000000 +0200 @@ -63,7 +63,7 @@ # Not updated to 2.6. config COMX tristate "MultiGate (COMX) synchronous serial boards support" - depends on WAN && (ISA || PCI) && OBSOLETE + depends on WAN && (ISA || PCI) && BROKEN ---help--- Say Y if you want to use any board from the MultiGate (COMX) family. These boards are synchronous serial adapters for the PC, @@ -443,7 +443,7 @@ config SDLA tristate "SDLA (Sangoma S502/S508) support" - depends on DLCI && ISA + depends on DLCI && ISA && BROKEN_ON_SMP help Say Y here if you need a driver for the Sangoma S502A, S502E, and S508 Frame Relay Access Devices. These are multi-protocol cards, but @@ -476,7 +476,7 @@ config VENDOR_SANGOMA tristate "Sangoma WANPIPE(tm) multiprotocol cards" - depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) + depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN ---help--- WANPIPE from Sangoma Technologies Inc. () is a family of intelligent multiprotocol WAN adapters with data @@ -625,7 +625,7 @@ config X25_ASY tristate "X.25 async driver (EXPERIMENTAL)" - depends on WAN && LAPB && X25 + depends on WAN && LAPB && X25 && BROKEN_ON_SMP ---help--- This is a driver for sending and receiving X.25 frames over regular asynchronous serial lines such as telephone lines equipped with --- linux-2.6.0-test2-full/drivers/net/hamradio/Kconfig.old 2003-07-29 09:27:25.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/net/hamradio/Kconfig 2003-07-29 09:39:25.000000000 +0200 @@ -1,6 +1,6 @@ config MKISS tristate "Serial port KISS driver" - depends on AX25 + depends on AX25 && BROKEN_ON_SMP ---help--- KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly @@ -19,7 +19,7 @@ config 6PACK tristate "Serial port 6PACK driver" - depends on AX25 + depends on AX25 && BROKEN_ON_SMP ---help--- 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of @@ -49,7 +49,7 @@ config DMASCC tristate "High-speed (DMA) SCC driver for AX.25" - depends on ISA && AX25 + depends on ISA && AX25 && BROKEN_ON_SMP ---help--- This is a driver for high-speed SCC boards, i.e. those supporting DMA on one port. You usually use those boards to connect your --- linux-2.6.0-test2-full/drivers/net/Kconfig.old 2003-07-28 22:23:19.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/net/Kconfig 2003-07-29 10:31:28.000000000 +0200 @@ -400,7 +400,7 @@ config MVME16x_NET tristate "MVME16x Ethernet support" - depends on NETDEVICES && MVME16x + depends on NETDEVICES && MVME16x && BROKEN_ON_SMP help This is the driver for the Ethernet interface on the Motorola MVME162, 166, 167, 172 and 177 boards. Say Y here to include the @@ -409,7 +409,7 @@ config BVME6000_NET tristate "BVME6000 Ethernet support" - depends on NETDEVICES && BVME6000 + depends on NETDEVICES && BVME6000 && BROKEN_ON_SMP help This is the driver for the Ethernet interface on BVME4000 and BVME6000 VME boards. Say Y here to include the driver for this chip @@ -704,7 +704,7 @@ config ELMC_II tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" - depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL + depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL && BROKEN_ON_SMP help If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -882,7 +882,7 @@ config NI5010 tristate "NI5010 support (EXPERIMENTAL)" - depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL + depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -1221,7 +1221,7 @@ config SKMC tristate "SKnet MCA support" - depends on NET_ETHERNET && MCA + depends on NET_ETHERNET && MCA && BROKEN ---help--- These are Micro Channel Ethernet adapters. You need to say Y to "MCA support" in order to use this driver. Supported cards are the SKnet @@ -1350,7 +1350,7 @@ config APRICOT tristate "Apricot Xen-II on board Ethernet" - depends on NET_PCI && ISA + depends on NET_PCI && ISA && BROKEN_ON_SMP help If you have a network (Ethernet) controller of this type, say Y and read the Ethernet-HOWTO, available from @@ -2144,7 +2144,7 @@ config DEFXX tristate "Digital DEFEA and DEFPA adapter support" - depends on FDDI && (PCI || EISA) + depends on FDDI && (PCI || EISA) && BROKEN help This is support for the DIGITAL series of EISA (DEFEA) and PCI (DEFPA) controllers which can connect you to a local FDDI network. @@ -2487,7 +2487,7 @@ config IPHASE5526 tristate "Interphase 5526 Tachyon chipset based adapter support" - depends on NET_FC && SCSI && PCI + depends on NET_FC && SCSI && PCI && BROKEN help Say Y here if you have a Fibre Channel adaptor of this kind. --- linux-2.6.0-test2-full/drivers/i2c/Kconfig.old 2003-07-29 00:58:38.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/i2c/Kconfig 2003-07-29 00:59:05.000000000 +0200 @@ -152,7 +152,7 @@ config I2C_ELEKTOR tristate "Elektor ISA card" - depends on I2C_ALGOPCF + depends on I2C_ALGOPCF && BROKEN_ON_SMP help This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such an adapter. --- linux-2.6.0-test2-full/drivers/video/Kconfig.old 2003-07-28 22:23:20.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/video/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -40,7 +40,7 @@ config FB_CIRRUS tristate "Cirrus Logic support" - depends on FB && (AMIGA || PCI) + depends on FB && (AMIGA || PCI) && BROKEN ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -55,7 +55,7 @@ config FB_PM2 tristate "Permedia2 support" - depends on FB && (AMIGA || PCI) + depends on FB && (AMIGA || PCI) && BROKEN help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -802,7 +802,7 @@ config FB_PM3 tristate "Permedia3 support" - depends on FB && PCI + depends on FB && PCI && BROKEN help This is the frame buffer device driver for the 3DLabs Permedia3 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & --- linux-2.6.0-test2-full/drivers/isdn/hardware/avm/Kconfig.old 2003-07-29 01:57:44.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/isdn/hardware/avm/Kconfig 2003-07-29 01:58:59.000000000 +0200 @@ -12,13 +12,13 @@ config ISDN_DRV_AVMB1_B1ISA tristate "AVM B1 ISA support" - depends on CAPI_AVM && ISDN_CAPI && ISA + depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP help Enable support for the ISA version of the AVM B1 card. config ISDN_DRV_AVMB1_B1PCI tristate "AVM B1 PCI support" - depends on CAPI_AVM && ISDN_CAPI && PCI + depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP help Enable support for the PCI version of the AVM B1 card. @@ -30,14 +30,14 @@ config ISDN_DRV_AVMB1_T1ISA tristate "AVM T1/T1-B ISA support" - depends on CAPI_AVM && ISDN_CAPI && ISA + depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP help Enable support for the AVM T1 T1B card. Note: This is a PRI card and handle 30 B-channels. config ISDN_DRV_AVMB1_B1PCMCIA tristate "AVM B1/M1/M2 PCMCIA support" - depends on CAPI_AVM && ISDN_CAPI + depends on CAPI_AVM && ISDN_CAPI && BROKEN_ON_SMP help Enable support for the PCMCIA version of the AVM B1 card. @@ -50,14 +50,14 @@ config ISDN_DRV_AVMB1_T1PCI tristate "AVM T1/T1-B PCI support" - depends on CAPI_AVM && ISDN_CAPI && PCI + depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP help Enable support for the AVM T1 T1B card. Note: This is a PRI card and handle 30 B-channels. config ISDN_DRV_AVMB1_C4 tristate "AVM C4/C2 support" - depends on CAPI_AVM && ISDN_CAPI && PCI + depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP help Enable support for the AVM C4/C2 PCI cards. These cards handle 4/2 BRI ISDN lines (8/4 channels). --- linux-2.6.0-test2-full/drivers/isdn/i4l/Kconfig.old 2003-07-28 22:23:20.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/isdn/i4l/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -106,6 +106,7 @@ config ISDN_DIVERSION tristate "Support isdn diversion services" + depends on BROKEN help This option allows you to use some supplementary diversion services in conjunction with the HiSax driver on an EURO/DSS1 --- linux-2.6.0-test2-full/drivers/isdn/hisax/Kconfig.old 2003-07-28 22:23:20.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/isdn/hisax/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -165,6 +165,7 @@ config HISAX_DIEHLDIVA bool "Eicon.Diehl Diva cards" + depends on !ISAPNP || BROKEN help This enables HiSax support for the Eicon.Diehl Diva none PRO versions passive ISDN cards. @@ -207,6 +208,7 @@ config HISAX_SEDLBAUER bool "Sedlbauer cards" + depends on !ISAPNP || BROKEN help This enables HiSax support for the Sedlbauer passive ISDN cards. --- linux-2.6.0-test2-full/drivers/isdn/Kconfig.old 2003-07-29 01:50:25.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/isdn/Kconfig 2003-07-29 01:50:48.000000000 +0200 @@ -22,7 +22,7 @@ menu "Old ISDN4Linux" - depends on NET && ISDN_BOOL + depends on NET && ISDN_BOOL && BROKEN_ON_SMP config ISDN tristate "Old ISDN4Linux (obsolete)" --- linux-2.6.0-test2-full/drivers/media/video/Kconfig.old 2003-07-28 22:23:20.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/media/video/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -161,7 +161,7 @@ config VIDEO_ZORAN tristate "Zoran ZR36057/36060 Video For Linux" - depends on VIDEO_DEV && PCI && I2C + depends on VIDEO_DEV && PCI && I2C && BROKEN help Say Y here to include support for video cards based on the Zoran ZR36057/36060 encoder/decoder chip (including the Iomega Buz and the @@ -190,7 +190,7 @@ config VIDEO_ZR36120 tristate "Zoran ZR36120/36125 Video For Linux" - depends on VIDEO_DEV && PCI && I2C + depends on VIDEO_DEV && PCI && I2C && BROKEN help Support for ZR36120/ZR36125 based frame grabber/overlay boards. This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV, --- linux-2.6.0-test2-full/drivers/char/epca.c.old 2003-07-28 22:23:20.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/char/epca.c 2003-07-28 22:25:21.000000000 +0200 @@ -40,6 +40,7 @@ #include #include #include +#include #include #include --- linux-2.6.0-test2-full/drivers/char/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/char/Kconfig 2003-07-29 00:50:26.000000000 +0200 @@ -78,7 +78,7 @@ config COMPUTONE tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP ---help--- This driver supports the entire family of Intelliport II/Plus controllers with the exception of the MicroChannel controllers and @@ -111,7 +111,7 @@ config CYCLADES tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP ---help--- This is a driver for a card that gives you many serial ports. You would need something like this to connect more than two modems to @@ -143,7 +143,7 @@ config DIGIEPCA tristate "Digiboard Intelligent Async Support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP ---help--- This is a driver for Digi International's Xx, Xeve, and Xem series of cards which provide multiple serial ports. You would need @@ -162,7 +162,7 @@ config DIGI tristate "Digiboard PC/Xx Support" - depends on SERIAL_NONSTANDARD && DIGIEPCA=n + depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN help This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards that give you many serial ports. You would need something like this @@ -175,7 +175,7 @@ config ESPSERIAL tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA + depends on SERIAL_NONSTANDARD && ISA && BROKEN help This is a driver which supports Hayes ESP serial ports. Both single port cards and multiport cards are supported. Make sure to read @@ -188,7 +188,7 @@ config MOXA_INTELLIO tristate "Moxa Intellio support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP help Say Y here if you have a Moxa Intellio multiport serial card. @@ -199,7 +199,7 @@ config MOXA_SMARTIO tristate "Moxa SmartIO support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP help Say Y here if you have a Moxa SmartIO multiport serial card. @@ -260,7 +260,7 @@ config RISCOM8 tristate "SDL RISCom/8 card support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN help This is a driver for the SDL Communications RISCom/8 multiport card, which gives you many serial ports. You would need something like @@ -273,7 +273,7 @@ config SPECIALIX tristate "Specialix IO8+ card support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN help This is a driver for the Specialix IO8+ multiport card (both the ISA and the PCI version) which gives you many serial ports. You @@ -297,7 +297,7 @@ config SX tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP help This is a driver for the SX and SI multiport serial cards. Please read the file for details. @@ -308,7 +308,7 @@ config RIO tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP help This is a driver for the Specialix RIO, a smart serial card which drives an outboard box that can support up to 128 ports. Product @@ -337,7 +337,7 @@ config STALLION tristate "Stallion EasyIO or EC8/32 support" - depends on STALDRV + depends on STALDRV && BROKEN help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read @@ -350,7 +350,7 @@ config ISTALLION tristate "Stallion EC8/64, ONboard, Brumby support" - depends on STALDRV + depends on STALDRV && BROKEN help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read @@ -363,7 +363,7 @@ config SERIAL_TX3912 bool "TMPTX3912/PR31700 serial port support" - depends on SERIAL_NONSTANDARD && MIPS + depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP help The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core; see . @@ -423,7 +423,7 @@ config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO + depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP ---help--- This option supports the 2232 7-port serial card shipped with the Amiga 2000 and other Zorro-bus machines, dating from 1989. At @@ -907,6 +907,7 @@ config FTAPE tristate "Ftape (QIC-80/Travan) support" + depends on BROKEN_ON_SMP ---help--- If you have a tape drive that is connected to your floppy controller, say Y here. --- linux-2.6.0-test2-full/drivers/char/generic_serial.c.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/char/generic_serial.c 2003-07-28 22:25:21.000000000 +0200 @@ -25,6 +25,7 @@ #include #include #include +#include #include #include --- linux-2.6.0-test2-full/drivers/scsi/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/scsi/Kconfig 2003-07-29 10:57:31.000000000 +0200 @@ -355,7 +355,7 @@ # All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " - depends on !X86_64 && SCSI + depends on !X86_64 && SCSI && BROKEN help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained @@ -398,7 +398,7 @@ # does not use pci dma and seems to be onboard only for old machines config SCSI_AM53C974 tristate "AM53/79C974 PCI SCSI support" - depends on X86 && PCI && SCSI + depends on X86 && PCI && SCSI && BROKEN ---help--- This is support for the AM53/79C974 SCSI host adapters. Please read for details. Also, the @@ -455,7 +455,7 @@ config SCSI_CPQFCTS tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support" - depends on PCI && SCSI + depends on PCI && SCSI && BROKEN help Say Y here to compile in support for the Compaq StorageWorks Fibre Channel 64-bit/66Mhz Host Bus Adapter. @@ -626,7 +626,7 @@ config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" - depends on ISA && SCSI + depends on ISA && SCSI && (BROKEN || !SCSI_GENERIC_NCR5380) ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using memory mapped I/O. @@ -742,7 +742,7 @@ config SCSI_INITIO tristate "Initio 9100U(W) support" - depends on PCI && SCSI + depends on PCI && SCSI && BROKEN help This is support for the Initio 91XXU(W) SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -1161,7 +1161,7 @@ config SCSI_MCA_53C9X tristate "NCR MCA 53C9x SCSI support" - depends on MCA && SCSI + depends on MCA && SCSI && BROKEN_ON_SMP help Some MicroChannel machines, notably the NCR 35xx line, use a SCSI controller based on the NCR 53C94. This driver will allow use of @@ -1189,7 +1189,7 @@ config SCSI_PCI2000 tristate "PCI2000 support" - depends on PCI && SCSI + depends on PCI && SCSI && BROKEN help This is support for the PCI2000I EIDE interface card which acts as a SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -1202,7 +1202,7 @@ config SCSI_PCI2220I tristate "PCI2220i support" - depends on PCI && SCSI + depends on PCI && SCSI && BROKEN help This is support for the PCI2220i EIDE interface card which acts as a SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -1314,7 +1314,7 @@ config SCSI_SEAGATE tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI + depends on X86 && ISA && SCSI && BROKEN ---help--- These are 8-bit SCSI controllers; the ST-01 is also supported by this driver. It is explained in section 3.9 of the SCSI-HOWTO, @@ -1381,7 +1381,7 @@ config SCSI_DC390T tristate "Tekram DC390(T) and Am53/79C974 SCSI support" - depends on PCI && SCSI + depends on PCI && SCSI && BROKEN ---help--- This driver supports PCI SCSI host adapters based on the Am53C974A chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard --- linux-2.6.0-test2-full/drivers/mtd/devices/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/mtd/devices/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -102,7 +102,7 @@ config MTD_BLKMTD tristate "MTD emulation using block device" - depends on MTD + depends on MTD && BROKEN help This driver allows a block device to appear as an MTD. It would generally be used in the following cases: --- linux-2.6.0-test2-full/drivers/ide/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/ide/Kconfig 2003-07-28 22:25:21.000000000 +0200 @@ -213,7 +213,31 @@ say M here and read . The module will be called ide-cd. -#dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE +config BLK_DEV_IDETAPE + tristate "Include IDE/ATAPI TAPE support" + depends on BLK_DEV_IDE && BROKEN + help + If you have an IDE tape drive using the ATAPI protocol, say Y. + ATAPI is a newer protocol used by IDE tape and CD-ROM drives, + similar to the SCSI protocol. If you have an SCSI tape drive + however, you can say N here. + + You should also say Y if you have an OnStream DI-30 tape drive; this + will not work with the SCSI protocol, until there is support for the + SC-30 and SC-50 versions. + + If you say Y here, the tape drive will be identified at boot time + along with other IDE devices, as "hdb" or "hdc", or something + similar, and will be mapped to a character device such as "ht0" + (check the boot messages with dmesg). Be sure to consult the + and files + for usage information. + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The module + will be called ide-tape.o. + config BLK_DEV_IDEFLOPPY tristate "Include IDE/ATAPI FLOPPY support" depends on BLK_DEV_IDE --- linux-2.6.0-test2-full/drivers/atm/Kconfig.old 2003-07-29 00:07:40.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/atm/Kconfig 2003-07-29 00:08:56.000000000 +0200 @@ -145,7 +145,7 @@ config ATM_ZATM tristate "ZeitNet ZN1221/ZN1225" - depends on PCI && ATM + depends on PCI && ATM && BROKEN_ON_SMP help Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM adapters. @@ -253,7 +253,7 @@ config ATM_AMBASSADOR tristate "Madge Ambassador (Collage PCI 155 Server)" - depends on PCI && ATM + depends on PCI && ATM && BROKEN_ON_SMP help This is a driver for ATMizer based ATM card produced by Madge Networks Ltd. Say Y (or M to compile as a module named ambassador) --- linux-2.6.0-test2-full/drivers/cdrom/Kconfig.old 2003-07-29 00:22:00.000000000 +0200 +++ linux-2.6.0-test2-full/drivers/cdrom/Kconfig 2003-07-29 00:28:11.000000000 +0200 @@ -74,7 +74,7 @@ config SBPCD tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support" - depends on CD_NO_IDESCSI + depends on CD_NO_IDESCSI && BROKEN_ON_SMP ---help--- This driver supports most of the drives which use the Panasonic or Sound Blaster interface. Please read the file @@ -199,7 +199,7 @@ config CM206 tristate "Philips/LMS CM206 CDROM support" - depends on CD_NO_IDESCSI + depends on CD_NO_IDESCSI && BROKEN_ON_SMP ---help--- If you have a Philips/LMS CD-ROM drive cm206 in combination with a cm260 host adapter card, say Y here. Please also read the file @@ -245,7 +245,7 @@ config CDU31A tristate "Sony CDU31A/CDU33A CDROM support" - depends on CD_NO_IDESCSI + depends on CD_NO_IDESCSI && BROKEN_ON_SMP ---help--- These CD-ROM drives have a spring-pop-out caddyless drawer, and a rectangular green LED centered beneath it. NOTE: these CD-ROM @@ -267,7 +267,7 @@ config CDU535 tristate "Sony CDU535 CDROM support" - depends on CD_NO_IDESCSI + depends on CD_NO_IDESCSI && BROKEN_ON_SMP ---help--- This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM drives. Please read the file . --- linux-2.6.0-test2-full/fs/partitions/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/fs/partitions/Kconfig 2003-07-28 22:25:22.000000000 +0200 @@ -29,6 +29,7 @@ config ACORN_PARTITION_EESOX bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION + depends on BROKEN default y if !PARTITION_ADVANCED && ARCH_ACORN config ACORN_PARTITION_ICS --- linux-2.6.0-test2-full/sound/oss/Kconfig.old 2003-07-28 22:23:21.000000000 +0200 +++ linux-2.6.0-test2-full/sound/oss/Kconfig 2003-07-28 22:25:22.000000000 +0200 @@ -912,7 +912,7 @@ config SOUND_AWE32_SYNTH tristate "AWE32 synth" - depends on SOUND_OSS + depends on SOUND_OSS && (!ISAPNP || BROKEN) help Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or similar sound card. See , --- linux-2.6.0-test2-full/init/Kconfig.old 2003-07-28 22:23:22.000000000 +0200 +++ linux-2.6.0-test2-full/init/Kconfig 2003-07-29 10:14:28.000000000 +0200 @@ -34,6 +34,10 @@ endmenu +config BROKEN_ON_SMP + bool + depends on BROKEN || !SMP + default y menu "General setup"