archive mirror
 help / color / mirror / Atom feed
From: Kyuma Ohta <>
Subject: [usb] Can't detect connected device w/ VT6206
Date: Fri, 01 Aug 2003 04:50:07 +0900 (JST)	[thread overview]
Message-ID: <> (raw)

I'm using VIA KT400+ as mainboard,it includes VIA VT6206 as USB 2.0 I/F.
When using kernel (2.4/2.6), this chip is probed as uhci or ehci,
but connected device (i.e. gamepad,serial adapter) is not detected as
right device.

whatisthis@merchior:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198
00:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0a.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:14.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
whatisthis@merchior:~$ lsusb
Bus 001 Device 001: ID 0000:0000  
 I'm using usbmgr or hotplug,results is same.
 What's wrong ? :-(


             reply	other threads:[~2003-07-31 19:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-31 19:50 Kyuma Ohta [this message]
2003-08-01 21:31 ` [usb] Can't detect connected device w/ VT6206 Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).