linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Zio! compactflash doesn't work
@ 2003-07-29 22:07 Grant Miner
  2003-07-30  6:35 ` Alex Riesen
  2003-07-30 23:17 ` Greg KH
  0 siblings, 2 replies; 14+ messages in thread
From: Grant Miner @ 2003-07-29 22:07 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

I have a Microtech CompactFlash ZiO! USB

cat /proc/bus/usb/devices
T:  Bus=02 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=04e6 ProdID=1010 Rev= 0.05
S:  Manufacturer=SHUTTLE
S:  Product=SCM Micro USBAT-02
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=5ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
worked in 2.4 either.)  config is attached.  Any ideas?

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 24434 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_NAMES is not set
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_PCI=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=y

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=m
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_ACPI=y
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m

#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIAPRO=m

#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_I2C_SENSOR=m

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_FS_SYSCALL is not set
# CONFIG_REISER4_CHECK is not set
# CONFIG_REISER4_USE_EFLUSH is not set
# CONFIG_REISER4_BADBLOCKS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_X86_BIOS_REBOOT=y

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-29 22:07 Zio! compactflash doesn't work Grant Miner
@ 2003-07-30  6:35 ` Alex Riesen
  2003-07-30 16:00   ` Grant Miner
  2003-07-30 23:17 ` Greg KH
  1 sibling, 1 reply; 14+ messages in thread
From: Alex Riesen @ 2003-07-30  6:35 UTC (permalink / raw)
  To: Grant Miner; +Cc: linux-kernel

Grant Miner, Wed, Jul 30, 2003 00:07:05 +0200:
> I have a Microtech CompactFlash ZiO! USB
...
> but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> worked in 2.4 either.)  config is attached.  Any ideas?

It does not have to show up anywere. You have to modprobe sd-mod and
usb_storage first. Than access /dev/sd<something>:

$ mount -t vfat /dev/sda1 /mnt/cf


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-30  6:35 ` Alex Riesen
@ 2003-07-30 16:00   ` Grant Miner
  0 siblings, 0 replies; 14+ messages in thread
From: Grant Miner @ 2003-07-30 16:00 UTC (permalink / raw)
  To: linux-kernel

Alex Riesen wrote:
> Grant Miner, Wed, Jul 30, 2003 00:07:05 +0200:
> 
>>I have a Microtech CompactFlash ZiO! USB
> 
> ...
> 
>>but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
>>worked in 2.4 either.)  config is attached.  Any ideas?
> 
> 
> It does not have to show up anywere. You have to modprobe sd-mod and
> usb_storage first. Than access /dev/sd<something>:
> 
> $ mount -t vfat /dev/sda1 /mnt/cf
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Yes, I have both of those compiled in, yet no scsi disks appear.


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-29 22:07 Zio! compactflash doesn't work Grant Miner
  2003-07-30  6:35 ` Alex Riesen
@ 2003-07-30 23:17 ` Greg KH
  2003-07-31  1:14   ` Andries Brouwer
  1 sibling, 1 reply; 14+ messages in thread
From: Greg KH @ 2003-07-30 23:17 UTC (permalink / raw)
  To: Grant Miner; +Cc: linux-kernel

On Tue, Jul 29, 2003 at 05:07:05PM -0500, Grant Miner wrote:
> I have a Microtech CompactFlash ZiO! USB
> 
> cat /proc/bus/usb/devices
> T:  Bus=02 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  8 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
> P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> S:  Manufacturer=SHUTTLE
> S:  Product=SCM Micro USBAT-02
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=5ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> 
> but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> worked in 2.4 either.)  config is attached.  Any ideas?

Linux doesn't currently support this device, sorry.

greg k-h

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-30 23:17 ` Greg KH
@ 2003-07-31  1:14   ` Andries Brouwer
  2003-07-31  4:11     ` Greg KH
  0 siblings, 1 reply; 14+ messages in thread
From: Andries Brouwer @ 2003-07-31  1:14 UTC (permalink / raw)
  To: Greg KH; +Cc: Grant Miner, linux-kernel

On Wed, Jul 30, 2003 at 04:17:53PM -0700, Greg KH wrote:
> On Tue, Jul 29, 2003 at 05:07:05PM -0500, Grant Miner wrote:
> > I have a Microtech CompactFlash ZiO! USB
> > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > S:  Manufacturer=SHUTTLE
> > S:  Product=SCM Micro USBAT-02
> > 
> > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > worked in 2.4 either.)  config is attached.  Any ideas?
> 
> Linux doesn't currently support this device, sorry.

Hmm. I think I recall seeing people happily using that.
Do I misremember?

Google gives
  http://www.scm-pc-card.de/service/linux/zio-cf.html
and
  http://usbat2.sourceforge.net/

Andries


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31  1:14   ` Andries Brouwer
@ 2003-07-31  4:11     ` Greg KH
  2003-07-31  7:52       ` Matthew Dharm
  0 siblings, 1 reply; 14+ messages in thread
From: Greg KH @ 2003-07-31  4:11 UTC (permalink / raw)
  To: Andries Brouwer; +Cc: Grant Miner, linux-kernel

On Thu, Jul 31, 2003 at 03:14:50AM +0200, Andries Brouwer wrote:
> On Wed, Jul 30, 2003 at 04:17:53PM -0700, Greg KH wrote:
> > On Tue, Jul 29, 2003 at 05:07:05PM -0500, Grant Miner wrote:
> > > I have a Microtech CompactFlash ZiO! USB
> > > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > > S:  Manufacturer=SHUTTLE
> > > S:  Product=SCM Micro USBAT-02
> > > 
> > > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > > worked in 2.4 either.)  config is attached.  Any ideas?
> > 
> > Linux doesn't currently support this device, sorry.
> 
> Hmm. I think I recall seeing people happily using that.
> Do I misremember?
> 
> Google gives
>   http://www.scm-pc-card.de/service/linux/zio-cf.html
> and
>   http://usbat2.sourceforge.net/

In looking at the kernel source, I don't see support for this device.  I
do see support for others like it, but with different product ids.
Perhaps Grant can play with the settings in
drivers/usb/storage/unusual_devs.h to try to tweak things to work for
his device.

Sorry for not stating this originally, it has been a long day :)

greg k-h

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31  4:11     ` Greg KH
@ 2003-07-31  7:52       ` Matthew Dharm
  2003-07-31 10:09         ` Andries Brouwer
  2003-07-31 10:52         ` Wakko Warner
  0 siblings, 2 replies; 14+ messages in thread
From: Matthew Dharm @ 2003-07-31  7:52 UTC (permalink / raw)
  To: Greg KH; +Cc: Andries Brouwer, Grant Miner, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1448 bytes --]

On Wed, Jul 30, 2003 at 09:11:03PM -0700, Greg KH wrote:
> On Thu, Jul 31, 2003 at 03:14:50AM +0200, Andries Brouwer wrote:
> > On Wed, Jul 30, 2003 at 04:17:53PM -0700, Greg KH wrote:
> > > On Tue, Jul 29, 2003 at 05:07:05PM -0500, Grant Miner wrote:
> > > > I have a Microtech CompactFlash ZiO! USB
> > > > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > > > S:  Manufacturer=SHUTTLE
> > > > S:  Product=SCM Micro USBAT-02
> > > > 
> > > > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > > > worked in 2.4 either.)  config is attached.  Any ideas?
> > > 
> > > Linux doesn't currently support this device, sorry.
> > 
> > Hmm. I think I recall seeing people happily using that.
> > Do I misremember?
> > 
> > Google gives
> >   http://www.scm-pc-card.de/service/linux/zio-cf.html
> > and
> >   http://usbat2.sourceforge.net/
> 
> In looking at the kernel source, I don't see support for this device.  I
> do see support for others like it, but with different product ids.

Zio! apparently makes multiple CF readers.  Some of them are supported, but
this particular one is not, and likely never will be.

Matt

-- 
Matthew Dharm                              Home: mdharm-usb@one-eyed-alien.net 
Maintainer, Linux USB Mass Storage Driver

G:   Baaap booop BAHHHP.
Mir: 9600 Baud?
Mik: No, no!  9600 goes baap booop, not booop bahhhp!
					-- Greg, Miranda and Mike
User Friendly, 12/31/1998

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31  7:52       ` Matthew Dharm
@ 2003-07-31 10:09         ` Andries Brouwer
  2003-07-31 15:58           ` Greg KH
  2003-07-31 10:52         ` Wakko Warner
  1 sibling, 1 reply; 14+ messages in thread
From: Andries Brouwer @ 2003-07-31 10:09 UTC (permalink / raw)
  To: Greg KH, Grant Miner, linux-kernel

On Thu, Jul 31, 2003 at 12:52:13AM -0700, Matthew Dharm wrote:

> > > > > I have a Microtech CompactFlash ZiO! USB
> > > > > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > > > > S:  Manufacturer=SHUTTLE
> > > > > S:  Product=SCM Micro USBAT-02
> > > > > 
> > > > > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > > > > worked in 2.4 either.)  config is attached.  Any ideas?
> > > > 
> > > > Linux doesn't currently support this device, sorry.
> > > 
> > > Hmm. I think I recall seeing people happily using that.
> > > Do I misremember?
> > > 
> > > Google gives
> > >   http://www.scm-pc-card.de/service/linux/zio-cf.html
> > > and
> > >   http://usbat2.sourceforge.net/
> > 
> > In looking at the kernel source, I don't see support for this device.  I
> > do see support for others like it, but with different product ids.
> 
> Zio! apparently makes multiple CF readers.  Some of them are supported, but
> this particular one is not, and likely never will be.

This particular one has support on the place indicated.
Do you mean that that driver will never get into the vanilla kernel?
And no other driver ever will? Funny.

Andries


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31  7:52       ` Matthew Dharm
  2003-07-31 10:09         ` Andries Brouwer
@ 2003-07-31 10:52         ` Wakko Warner
  2003-08-01 13:11           ` Andries Brouwer
  1 sibling, 1 reply; 14+ messages in thread
From: Wakko Warner @ 2003-07-31 10:52 UTC (permalink / raw)
  To: Greg KH, Andries Brouwer, Grant Miner, linux-kernel

> Zio! apparently makes multiple CF readers.  Some of them are supported, but
> this particular one is not, and likely never will be.

What about this one:
Bus 001 Device 002: ID 0781:0005 SanDisk Corp. SDDR-05b (CF II) ImageMate
CompactFlash Reader

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31 10:09         ` Andries Brouwer
@ 2003-07-31 15:58           ` Greg KH
  2003-07-31 17:52             ` Matthew Dharm
  0 siblings, 1 reply; 14+ messages in thread
From: Greg KH @ 2003-07-31 15:58 UTC (permalink / raw)
  To: Andries Brouwer; +Cc: Grant Miner, linux-kernel

On Thu, Jul 31, 2003 at 12:09:01PM +0200, Andries Brouwer wrote:
> On Thu, Jul 31, 2003 at 12:52:13AM -0700, Matthew Dharm wrote:
> 
> > > > > > I have a Microtech CompactFlash ZiO! USB
> > > > > > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > > > > > S:  Manufacturer=SHUTTLE
> > > > > > S:  Product=SCM Micro USBAT-02
> > > > > > 
> > > > > > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > > > > > worked in 2.4 either.)  config is attached.  Any ideas?
> > > > > 
> > > > > Linux doesn't currently support this device, sorry.
> > > > 
> > > > Hmm. I think I recall seeing people happily using that.
> > > > Do I misremember?
> > > > 
> > > > Google gives
> > > >   http://www.scm-pc-card.de/service/linux/zio-cf.html
> > > > and
> > > >   http://usbat2.sourceforge.net/
> > > 
> > > In looking at the kernel source, I don't see support for this device.  I
> > > do see support for others like it, but with different product ids.
> > 
> > Zio! apparently makes multiple CF readers.  Some of them are supported, but
> > this particular one is not, and likely never will be.
> 
> This particular one has support on the place indicated.
> Do you mean that that driver will never get into the vanilla kernel?
> And no other driver ever will? Funny.

No, I'm not saying that :)
In looking at the patch, if Matt agrees that it's ok to apply I will.  I
didn't see anything too bad in there.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31 15:58           ` Greg KH
@ 2003-07-31 17:52             ` Matthew Dharm
  2003-07-31 18:05               ` Andries Brouwer
  0 siblings, 1 reply; 14+ messages in thread
From: Matthew Dharm @ 2003-07-31 17:52 UTC (permalink / raw)
  To: Greg KH; +Cc: Andries Brouwer, Grant Miner, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2261 bytes --]

On Thu, Jul 31, 2003 at 08:58:56AM -0700, Greg KH wrote:
> On Thu, Jul 31, 2003 at 12:09:01PM +0200, Andries Brouwer wrote:
> > On Thu, Jul 31, 2003 at 12:52:13AM -0700, Matthew Dharm wrote:
> > 
> > > > > > > I have a Microtech CompactFlash ZiO! USB
> > > > > > > P:  Vendor=04e6 ProdID=1010 Rev= 0.05
> > > > > > > S:  Manufacturer=SHUTTLE
> > > > > > > S:  Product=SCM Micro USBAT-02
> > > > > > > 
> > > > > > > but it does not show up in /dev; this is in 2.6.0-pre1.  (It never 
> > > > > > > worked in 2.4 either.)  config is attached.  Any ideas?
> > > > > > 
> > > > > > Linux doesn't currently support this device, sorry.
> > > > > 
> > > > > Hmm. I think I recall seeing people happily using that.
> > > > > Do I misremember?
> > > > > 
> > > > > Google gives
> > > > >   http://www.scm-pc-card.de/service/linux/zio-cf.html
> > > > > and
> > > > >   http://usbat2.sourceforge.net/
> > > > 
> > > > In looking at the kernel source, I don't see support for this device.  I
> > > > do see support for others like it, but with different product ids.
> > > 
> > > Zio! apparently makes multiple CF readers.  Some of them are supported, but
> > > this particular one is not, and likely never will be.
> > 
> > This particular one has support on the place indicated.
> > Do you mean that that driver will never get into the vanilla kernel?
> > And no other driver ever will? Funny.
> 
> No, I'm not saying that :)
> In looking at the patch, if Matt agrees that it's ok to apply I will.  I
> didn't see anything too bad in there.

Apparently these guys made more progess than I thought.  Last time I talked
to them there seemed to be the general opinion that a driver would never
get done.

However, if you read the web page, it sounds like they're really not ready
to have this merged into the mainstream kernel.  I don't like to merge
things before their authors want them merged.

I don't really have any objection to the 2.4 patch, but the 2.5 patch needs
some serious cleanup before it gets applied.

Matt

-- 
Matthew Dharm                              Home: mdharm-usb@one-eyed-alien.net 
Maintainer, Linux USB Mass Storage Driver

It was a new hope.
					-- Dust Puppy
User Friendly, 12/25/1998

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31 17:52             ` Matthew Dharm
@ 2003-07-31 18:05               ` Andries Brouwer
  0 siblings, 0 replies; 14+ messages in thread
From: Andries Brouwer @ 2003-07-31 18:05 UTC (permalink / raw)
  To: Greg KH, Grant Miner, linux-kernel

On Thu, Jul 31, 2003 at 10:52:07AM -0700, Matthew Dharm wrote:

[On the Vendor=04e6 ProdID=1010 Rev= 0.05 Microtech Zio! / Dane-Elec Zmate /
Kingston PCREAD / Delkin Efilm / ImageMate SDDR-05b USB CF reader, that has
working sourceforge code at http://usbat2.sourceforge.net/index.html ]

> Apparently these guys made more progess than I thought.  Last time I talked
> to them there seemed to be the general opinion that a driver would never
> get done.
> 
> However, if you read the web page, it sounds like they're really not ready
> to have this merged into the mainstream kernel.  I don't like to merge
> things before their authors want them merged.
> 
> I don't really have any objection to the 2.4 patch, but the 2.5 patch needs
> some serious cleanup before it gets applied.

Yes, it does need some polishing.
[If someone in Amsterdam has one, I wouldn't mind borrowing it for a day or two.]



^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-07-31 10:52         ` Wakko Warner
@ 2003-08-01 13:11           ` Andries Brouwer
  2003-08-02  1:03             ` Wakko Warner
  0 siblings, 1 reply; 14+ messages in thread
From: Andries Brouwer @ 2003-08-01 13:11 UTC (permalink / raw)
  To: Wakko Warner; +Cc: Greg KH, Grant Miner, linux-kernel, linux-usb-devel

On Thu, Jul 31, 2003 at 06:52:06AM -0400, Wakko Warner wrote:

> What about this one:
> Bus 001 Device 002: ID 0781:0005 SanDisk Corp. SDDR-05b (CF II) ImageMate
> CompactFlash Reader

That is reported to work with the unusual dev patch

+/* glc: Greg Corcoran <gregc at spidex.com>  -- tested with SDDR-05b */
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+               "Sandisk",
+               "ImageMate SDDR-05b",
+               US_SC_SCSI, US_PR_ZIOCF, init_ziocf,
+               US_FL_START_STOP | US_FL_SINGLE_LUN),
+

together with the Zio! driver at sourceforge, maybe

  http://usbat2.sourceforge.net/index.html

if I recall correctly.

Andries


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Zio! compactflash doesn't work
  2003-08-01 13:11           ` Andries Brouwer
@ 2003-08-02  1:03             ` Wakko Warner
  0 siblings, 0 replies; 14+ messages in thread
From: Wakko Warner @ 2003-08-02  1:03 UTC (permalink / raw)
  To: Andries Brouwer; +Cc: Greg KH, Grant Miner, linux-kernel, linux-usb-devel

> > What about this one:
> > Bus 001 Device 002: ID 0781:0005 SanDisk Corp. SDDR-05b (CF II) ImageMate
> > CompactFlash Reader
> 
> That is reported to work with the unusual dev patch
> 
> +/* glc: Greg Corcoran <gregc at spidex.com>  -- tested with SDDR-05b */
> +UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
> +               "Sandisk",
> +               "ImageMate SDDR-05b",
> +               US_SC_SCSI, US_PR_ZIOCF, init_ziocf,
> +               US_FL_START_STOP | US_FL_SINGLE_LUN),
> +
> 
> together with the Zio! driver at sourceforge, maybe
> 
>   http://usbat2.sourceforge.net/index.html
> 
> if I recall correctly.

I checked the link.  Doesn't look like the drive is ready for 2.6 which is
what I planned on using this with.  The chip on the device definately says
"usbat-2".  Unfortuantely, I'm not well versed in kernel hacking so I'll
have to wait til they port it.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2003-08-02  0:48 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-29 22:07 Zio! compactflash doesn't work Grant Miner
2003-07-30  6:35 ` Alex Riesen
2003-07-30 16:00   ` Grant Miner
2003-07-30 23:17 ` Greg KH
2003-07-31  1:14   ` Andries Brouwer
2003-07-31  4:11     ` Greg KH
2003-07-31  7:52       ` Matthew Dharm
2003-07-31 10:09         ` Andries Brouwer
2003-07-31 15:58           ` Greg KH
2003-07-31 17:52             ` Matthew Dharm
2003-07-31 18:05               ` Andries Brouwer
2003-07-31 10:52         ` Wakko Warner
2003-08-01 13:11           ` Andries Brouwer
2003-08-02  1:03             ` Wakko Warner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).