archive mirror
 help / color / mirror / Atom feed
From: Nuno Monteiro <>
To: Pasi Savilaakso <>
Cc: Linux Kernel ML <>
Subject: Re: audio problem with 2.4.22-pre10 and 2.4.22-pre10-ac1
Date: Sat, 2 Aug 2003 13:19:21 +0100	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>; from on Sat, Aug 02, 2003 at 08:31:56 +0100

On 2003.08.02 08:31, Pasi Savilaakso wrote:
> I have one asus a7v8x-x, which I just installed. Everything else is  
> fine
> but
> no audio. when I got this on first time after compiling kernel and  
> tried
> many
> different configs but no success at all. current audio config is at the
> end of
> mail.

<snip snip>

Hi Pasi,

I have a similar board lying around and I had some trouble getting sound  
to work with OSS/2.4 drivers also. As I remember. the trick was to  
connect the speakers to the microphone port (the pink one, on the far  
left), instead of the regular speaker-out. With ALSA, both on 2.4 or  
2.5/6, the sound output is on the speaker-out port, as it should. One  
small quirk though, as the sound volume is controled by the "Surround"  
mixer setting, rather than "Master" -- this has the most annoying effect  
of making the sound-volume task bar applets useless. Eventually I just  
gave up on the on-board sound and plugged in a pci soundblaster.

Hope this can help you.



  reply	other threads:[~2003-08-02 15:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-02  7:31 audio problem with 2.4.22-pre10 and 2.4.22-pre10-ac1 Pasi Savilaakso
2003-08-02 12:19 ` Nuno Monteiro [this message]
2003-08-03  4:46   ` Pasi Savilaakso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).