From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S269512AbTHBPuS (ORCPT ); Sat, 2 Aug 2003 11:50:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S269514AbTHBPuS (ORCPT ); Sat, 2 Aug 2003 11:50:18 -0400 Received: from fep02-svc.mail.telepac.pt ([194.65.5.201]:50374 "EHLO fep02-svc.mail.telepac.pt") by vger.kernel.org with ESMTP id S269512AbTHBPuO (ORCPT ); Sat, 2 Aug 2003 11:50:14 -0400 Date: Sat, 2 Aug 2003 13:19:21 +0100 From: Nuno Monteiro To: Pasi Savilaakso Cc: Linux Kernel ML Subject: Re: audio problem with 2.4.22-pre10 and 2.4.22-pre10-ac1 Message-ID: <20030802121921.GA2023@hobbes.itsari.int> References: <200308021031.57014.pasi.savilaakso@pp.inet.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; Content-Disposition: inline Content-Transfer-Encoding: 7BIT In-Reply-To: <200308021031.57014.pasi.savilaakso@pp.inet.fi>; from pasi.savilaakso@pp.inet.fi on Sat, Aug 02, 2003 at 08:31:56 +0100 X-Mailer: Balsa 2.0.13 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On 2003.08.02 08:31, Pasi Savilaakso wrote: > I have one asus a7v8x-x, which I just installed. Everything else is > fine > but > no audio. when I got this on first time after compiling kernel and > tried > many > different configs but no success at all. current audio config is at the > end of > mail. > Hi Pasi, I have a similar board lying around and I had some trouble getting sound to work with OSS/2.4 drivers also. As I remember. the trick was to connect the speakers to the microphone port (the pink one, on the far left), instead of the regular speaker-out. With ALSA, both on 2.4 or 2.5/6, the sound output is on the speaker-out port, as it should. One small quirk though, as the sound volume is controled by the "Surround" mixer setting, rather than "Master" -- this has the most annoying effect of making the sound-volume task bar applets useless. Eventually I just gave up on the on-board sound and plugged in a pci soundblaster. Hope this can help you. Regards, Nuno