archive mirror
 help / color / mirror / Atom feed
From: Fridtjof Busse <>
Subject: Re: Linux 2.4.22-pre10
Date: Sat, 2 Aug 2003 14:13:11 +0200	[thread overview]
Message-ID: <> (raw)

> Hello,
> Here goes -pre10, hopefully the last -pre of 2.4.22. 
> It contains a bunch of important fixes, detailed below.
> Please help testing.

Dumping to an USB-harddisk still doesn't work:

kernel: hub.c: new USB device 00:02.2-2, assigned address 4
kernel: scsi1 : SCSI emulation for USB Mass Storage devices
kernel:   Vendor: Maxtor 6  Model: Y120L0            Rev: 0811
kernel:   Type:   Direct-Access                   ANSI SCSI revision: 02
kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
kernel: SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
kernel:  /dev/scsi/host1/bus0/target0/lun0: p1
kernel: WARNING: USB Mass Storage data integrity not assured
kernel: USB Mass Storage device found at 4
kernel: usb_control/bulk_msg: timeout

No start dump:

last message repeated 2 times
kernel: usb.c: USB disconnect on device 00:02.2-2 address 4
kernel: usb-storage: host_reset() requested but not implemented
kernel: scsi: device set offline - command error recover failed: host 1 
channel 0 id 0 lun 0
kernel: 192
kernel:  I/O error: dev 08:01, sector 81655440
lots of I/O errors following

I also reported this to usb-devel, but never got a reply.
Works fine with 2.4.21.
Please CC me, thanks

Fridtjof Busse
printk("Illegal format on cdrom.  Pester manufacturer.\n"); 
	2.2.16 /usr/src/linux/fs/isofs/inode.c

             reply	other threads:[~2003-08-02 12:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-02 12:13 Fridtjof Busse [this message]
  -- strict thread matches above, loose matches on Subject: below --
2003-08-02  7:26 Linux 2.4.22-pre10 Margit Schubert-While
2003-08-01 16:19 Marcelo Tosatti
2003-08-01 22:47 ` Willy Tarreau
2003-08-02  9:42   ` Martin Josefsson
2003-08-02 18:10     ` Willy Tarreau
2003-08-02 18:28       ` Martin Josefsson
2003-08-02 19:14         ` Willy Tarreau
2003-08-05 12:46   ` Marcelo Tosatti
2003-08-02 13:06 ` Stephan von Krawczynski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).