linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan von Krawczynski <skraw@ithnet.com>
To: Marcelo Tosatti <marcelo@conectiva.com.br>
Cc: andrea@suse.de, linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: 2.4.22-pre lockups (decoded oops for pre8)
Date: Sat, 2 Aug 2003 14:27:34 +0200	[thread overview]
Message-ID: <20030802142734.5df93471.skraw@ithnet.com> (raw)
In-Reply-To: <Pine.LNX.4.55L.0307251545090.14733@freak.distro.conectiva>

Hello Marcelo, hello andrea,

after some days of running 2.4.22-pre8 I finally got the crash (freeze as
usual). This time the debuggin setup worked and I got:


ksymoops 2.4.8 on i686 2.4.22-pre8.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.22-pre8/ (default)
     -m /boot/System.map-2.4.22-pre8 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address 4129b0fc
c0130084
*pde = 313f6067
Oops: 0002
CPU:    1
EIP:    0010:[<c0130084>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000   ebx: c2cfdba0   ecx: 00000000   edx: 4129b0fc
esi: d5fb0a24   edi: 0001ca22   ebp: c02eaaa8   esp: c345df30
ds: 0018   es: 0018   ss: 0018
Process kswapd (pid: 5, stackpage=c345d000)
Stack: c2cfdba0 d5fb0a24 c2cfdba0 c013924f c2cfdba0 000001d0 00000200 000001d0 
       00000006 00000020 000001d0 00000020 00000006 c0139493 00000006 00000001 
       c02eaaa8 000001d0 00000006 c02eaaa8 00000000 c013950e 00000020 c02eaaa8 
Call Trace:    [<c013924f>] [<c0139493>] [<c013950e>] [<c013961c>] [<c01396a8>]
  [<c01397d8>] [<c0139740>] [<c0105000>] [<c010592e>] [<c0139740>]
Code: 89 02 c7 43 24 00 00 00 00 f0 ff 0d 9c a5 37 c0 5a 5b 5e c3 


>>EIP; c0130084 <__remove_inode_page+44/60>   <=====

>>ebx; c2cfdba0 <_end+2952980/3852ee40>
>>esi; d5fb0a24 <_end+15c05804/3852ee40>
>>ebp; c02eaaa8 <contig_page_data+168/340>
>>esp; c345df30 <_end+30b2d10/3852ee40>

Trace; c013924f <shrink_cache+2df/3b0>
Trace; c0139493 <shrink_caches+63/a0>
Trace; c013950e <try_to_free_pages_zone+3e/60>
Trace; c013961c <kswapd_balance_pgdat+4c/b0>
Trace; c01396a8 <kswapd_balance+28/40>
Trace; c01397d8 <kswapd+98/c0>
Trace; c0139740 <kswapd+0/c0>
Trace; c0105000 <_stext+0/0>
Trace; c010592e <arch_kernel_thread+2e/40>
Trace; c0139740 <kswapd+0/c0>

Code;  c0130084 <__remove_inode_page+44/60>
00000000 <_EIP>:
Code;  c0130084 <__remove_inode_page+44/60>   <=====
   0:   89 02                     mov    %eax,(%edx)   <=====
Code;  c0130086 <__remove_inode_page+46/60>
   2:   c7 43 24 00 00 00 00      movl   $0x0,0x24(%ebx)
Code;  c013008d <__remove_inode_page+4d/60>
   9:   f0 ff 0d 9c a5 37 c0      lock decl 0xc037a59c
Code;  c0130094 <__remove_inode_page+54/60>
  10:   5a                        pop    %edx
Code;  c0130095 <__remove_inode_page+55/60>
  11:   5b                        pop    %ebx
Code;  c0130096 <__remove_inode_page+56/60>
  12:   5e                        pop    %esi
Code;  c0130097 <__remove_inode_page+57/60>
  13:   c3                        ret    


1 warning issued.  Results may not be reliable.


Hope this helps.
Anything further I can do?

Regards,
Stephan


       reply	other threads:[~2003-08-02 12:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Pine.LNX.4.55L.0307251040240.12645@freak.distro.conectiva>
     [not found] ` <20030725174517.5b21116d.skraw@ithnet.com>
     [not found]   ` <Pine.LNX.4.55L.0307251545090.14733@freak.distro.conectiva>
2003-08-02 12:27     ` Stephan von Krawczynski [this message]
2003-08-03  7:25       ` 2.4.22-pre lockups (decoded oops for pre8) Willy Tarreau
2003-08-03  9:40         ` Stephan von Krawczynski
2003-08-05 16:40       ` Marcelo Tosatti
2003-08-06  2:37         ` Stephan von Krawczynski
2003-08-06  7:41         ` 2.4.22-pre lockups (now decoded oops for pre10) Stephan von Krawczynski
2003-08-06  8:58           ` Oleg Drokin
2003-08-06  9:09           ` Willy Tarreau
2003-08-06  9:36             ` Stephan von Krawczynski
2003-08-06 12:45               ` Willy Tarreau
2003-08-18 14:23             ` Andrea Arcangeli
2003-08-06 18:15           ` Marcelo Tosatti
2003-08-07  2:14             ` Stephan von Krawczynski
2003-08-07  5:35               ` Oleg Drokin
2003-08-07 12:45               ` Marcelo Tosatti
     [not found]                 ` <3F325198.2010301@namesys.com>
2003-08-07 13:32                   ` Stephan von Krawczynski
2003-08-18 20:29                     ` Mike Fedyk
2003-08-18 20:39                       ` Stephan von Krawczynski
2003-08-18 21:05                         ` [grammar] " Matt Gibson
2003-08-18 21:09                         ` Mike Fedyk
2003-08-07 15:52                 ` Stephan von Krawczynski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030802142734.5df93471.skraw@ithnet.com \
    --to=skraw@ithnet.com \
    --cc=andrea@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo@conectiva.com.br \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).