On Sun, Aug 03, 2003 at 02:52:11PM -0700, Andrew Morton wrote: > Diffie wrote: > > > > I think this bug is due to me using the aic7xxx_old code ver 5.x.x. > > > > Under kernel 2.4.21 the aic7xxx (new) is ver 6.2.8 and it works great > > with Adaptec AHA-2940U2W controller i have. > > > > On 2.6.0-test2-mm3 (tried Linus test1,test2,mm1 and mm2) the NEW aic7xxx > > uses ver 6.2.35 and will not scan my IBM drive even though it > > initializes the correct SCSI ID,LUN etc... > > > > I would like to contact and report this issue to the aic7xxx maintaner > > and perhaps get it resolved.Where would be the best place to report this > > kind of problem? > > > > I have taken few screen captures which are available at: > > http://www.blazebox.homeip.net:81/diffie/images/2.6.0-test2/ and show > > the aic7xxx (new) failure. > > An appropriate way to report this would be to email Justin (CC'ed here) > and linux-scsi@vger.kernel.org. > > Andrew, Thank you for all your help.Sorry but i gave the wrong URL in previous email.The correct one is http://www.blazebox.homeip.net:81/diffie/images/linux-2.6.0-test2/ Attached is the dmesg,lspci and aic7xxx /proc information from 2.4.21 kernel. Regards, Paul B.