From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S271317AbTHCW3p (ORCPT ); Sun, 3 Aug 2003 18:29:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S271313AbTHCW3p (ORCPT ); Sun, 3 Aug 2003 18:29:45 -0400 Received: from pool-141-155-151-209.ny5030.east.verizon.net ([141.155.151.209]:6603 "EHLO mail.blazebox.homeip.net") by vger.kernel.org with ESMTP id S271295AbTHCW3O (ORCPT ); Sun, 3 Aug 2003 18:29:14 -0400 Date: Sun, 3 Aug 2003 18:31:15 -0400 From: Diffie To: Andrew Morton Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, "Justin T. Gibbs" Subject: Re: Badness in device_release at drivers/base/core.c:84 Message-ID: <20030803223115.GA1132@blazebox.homeip.net> References: <20030801182207.GA3759@blazebox.homeip.net> <20030801144455.450d8e52.akpm@osdl.org> <20030803015510.GB4696@blazebox.homeip.net> <20030802190737.3c41d4d8.akpm@osdl.org> <20030803214755.GA1010@blazebox.homeip.net> <20030803145211.29eb5e7c.akpm@osdl.org> <20030803222313.GA1090@blazebox.homeip.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="ZfOjI3PrQbgiZnxM" Content-Disposition: inline In-Reply-To: <20030803222313.GA1090@blazebox.homeip.net> User-Agent: Mutt/1.4.1i X-Operating-System: Slackware Linux 9.0 X-Kernel-Version: Linux 2.4.21-xfs X-Mailer: Mutt 1.4.1i http://www.mutt.org X-AntiVirus: checked by AntiVir MailGate (version: 2.0.1.14; AVE: 6.20.0.1; VDF: 6.20.0.55; host: blazebox.homeip.net) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --ZfOjI3PrQbgiZnxM Content-Type: multipart/mixed; boundary="EeQfGwPcQSOJBaQU" Content-Disposition: inline --EeQfGwPcQSOJBaQU Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Aug 03, 2003 at 06:23:13PM -0400, Diffie wrote: > On Sun, Aug 03, 2003 at 02:52:11PM -0700, Andrew Morton wrote: > > Diffie wrote: > > > > > > I think this bug is due to me using the aic7xxx_old code ver 5.x.x. > > >=20 > > > Under kernel 2.4.21 the aic7xxx (new) is ver 6.2.8 and it works great > > > with Adaptec AHA-2940U2W controller i have. > > >=20 > > > On 2.6.0-test2-mm3 (tried Linus test1,test2,mm1 and mm2) the NEW aic= 7xxx > > > uses ver 6.2.35 and will not scan my IBM drive even though it > > > initializes the correct SCSI ID,LUN etc... > > >=20 > > > I would like to contact and report this issue to the aic7xxx maintan= er > > > and perhaps get it resolved.Where would be the best place to report = this > > > kind of problem? > > >=20 > > > I have taken few screen captures which are available at: > > > http://www.blazebox.homeip.net:81/diffie/images/2.6.0-test2/ and show > > > the aic7xxx (new) failure. > >=20 > > An appropriate way to report this would be to email Justin (CC'ed here) > > and linux-scsi@vger.kernel.org. > >=20 > >=20 >=20 > Andrew, >=20 > Thank you for all your help.Sorry but i gave the wrong URL in previous > email.The correct one is http://www.blazebox.homeip.net:81/diffie/images/= linux-2.6.0-test2/=20 >=20 > Attached is the dmesg,lspci and aic7xxx /proc information from 2.4.21 > kernel. >=20 > Regards, >=20 > Paul B. >=20 I am sorry again for not including the attachement. --EeQfGwPcQSOJBaQU Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg-2.4.txt" Linux version 2.4.21-xfs (root@blaze.homeip.net) (gcc version 3.2.2) #1 Mon Jun 30 10:29:27 EDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f52c0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 262128 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32752 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Kernel command line: BOOT_IMAGE=Slackware-2.4 ro root=803 rootflags=quota acpi=off Initializing CPU#0 Detected 2204.995 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4404.01 BogoMIPS Memory: 1032968k/1048512k available (1930k kernel code, 15156k reserved, 347k data, 284k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 3200+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2205.0712 MHz. ..... host bus clock speed is 400.9219 MHz. cpu: 0, clocks: 4009219, slice: 2004609 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=3 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus 02 [IRQ] PCI: Using IRQ router default [10de/01e0] at 00:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 SGI-XFS CVS-2003-06-14_05:00_UTC with ACLs, no debug enabled SGI XFS Quota Management subsystem pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M spurious 8259A interrupt: IRQ7. keyboard: Timeout - AT keyboard not present?(00) FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DJNA-372200, ATA DISK drive blk: queue c03b01c0, I/O limit 4095Mb (mask 0xffffffff) hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=2920/240/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 hdc:end_request: I/O error, dev 16:00 (hdc), sector 0 end_request: I/O error, dev 16:00 (hdc), sector 2 end_request: I/O error, dev 16:00 (hdc), sector 4 end_request: I/O error, dev 16:00 (hdc), sector 6 end_request: I/O error, dev 16:00 (hdc), sector 0 end_request: I/O error, dev 16:00 (hdc), sector 2 end_request: I/O error, dev 16:00 (hdc), sector 4 end_request: I/O error, dev 16:00 (hdc), sector 6 ldm_validate_partition_table(): Disk read failed. end_request: I/O error, dev 16:00 (hdc), sector 0 end_request: I/O error, dev 16:00 (hdc), sector 2 end_request: I/O error, dev 16:00 (hdc), sector 4 end_request: I/O error, dev 16:00 (hdc), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue f7eca494, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: DDYS-T36950N Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7eca594, I/O limit 4095Mb (mask 0xffffffff) Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7eca694, I/O limit 4095Mb (mask 0xffffffff) Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7eca794, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 8 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit) SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. XFS mounting filesystem sd(8,3) Ending clean XFS mount for filesystem: sd(8,3) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 284k freed Adding Swap: 248968k swap-space (priority -1) XFS mounting filesystem sd(8,1) Ending clean XFS mount for filesystem: sd(8,1) NTFS driver v1.1.22 [Flags: R/O MODULE] NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only XFS mounting filesystem sd(8,5) Ending clean XFS mount for filesystem: sd(8,5) XFS mounting filesystem sd(8,6) Ending clean XFS mount for filesystem: sd(8,6) XFS mounting filesystem sd(8,7) Ending clean XFS mount for filesystem: sd(8,7) XFS mounting filesystem sd(8,8) Ending clean XFS mount for filesystem: sd(8,8) XFS mounting filesystem sd(8,9) Ending clean XFS mount for filesystem: sd(8,9) XFS mounting filesystem ide0(3,1) Ending clean XFS mount for filesystem: ide0(3,1) Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:02.0 to 64 usb-ohci.c: USB OHCI at membase 0xf8850000, IRQ 11 usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Setting latency timer of device 00:02.1 to 64 usb-ohci.c: USB OHCI at membase 0xf8852000, IRQ 9 usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice Intel(R) PRO/1000 Network Driver - version 5.0.43-k1 Copyright (c) 1999-2003 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection hub.c: new USB device 00:02.0-1, assigned address 2 hub.c: USB hub found hub.c: 3 ports detected hub.c: new USB device 00:02.0-2, assigned address 3 input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb1:3.0 hub.c: new USB device 00:02.0-1.1, assigned address 4 input1: USB HID v1.10 Keyboard [045e:001d] on usb1:4.0 input2: USB HID v1.10 Pointer [045e:001d] on usb1:4.1 e1000: eth0 NIC Link is Up 100 Mbps Full Duplex ohci1394: $Rev: 896 $ Ben Collins PCI: Setting latency timer of device 00:0d.0 to 64 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[ce084000-ce0847ff] Max Packet=[2048] ohci1394_0: SelfID received outside of bus reset sequence hub.c: new USB device 00:02.1-1, assigned address 2 Intel 810 + AC97 Audio, version 0.24, 10:34:08 Jun 30 2003 PCI: Setting latency timer of device 00:06.0 to 64 i810: NVIDIA nForce Audio found at IO 0xd000 and 0xe400, MEM 0x0000 and 0x0000, IRQ 5 usb.c: USB device 2 (vend/prod 0x46d/0x840) is not claimed by any active driver. ieee1394: Host added: Node[00:1023] GUID[8a1cc7ffff0020ed] [Linux OHCI-1394] i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ALG32 (ALC650) i810_audio: AC'97 codec 0, new EID value = 0x05c7 i810_audio: AC'97 codec 0, DAC map configured, total channels = 6 PCI: Setting latency timer of device 00:02.2 to 64 ehci-hcd 00:02.2: PCI device 10de:0068 (nVidia Corporation) ehci-hcd 00:02.2: irq 5, pci mem f88c0000 usb.c: new USB bus registered, assigned bus number 3 PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:02.2 PCI cache line size corrected to 64. ehci-hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 hub.c: USB hub found hub.c: 6 ports detected usb.c: USB disconnect on device 00:02.1-1 address 2 usb.c: USB disconnect on device 00:02.0-1 address 2 usb.c: USB disconnect on device 00:02.0-1.1 address 4 usb.c: USB disconnect on device 00:02.0-2 address 3 hub.c: new USB device 00:02.0-1, assigned address 5 hub.c: USB hub found hub.c: 3 ports detected Installing knfsd (copyright (C) 1996 okir@monad.swb.de). hub.c: new USB device 00:02.0-2, assigned address 6 input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb1:6.0 hub.c: new USB device 00:02.0-1.1, assigned address 7 input1: USB HID v1.10 Keyboard [045e:001d] on usb1:7.0 input2: USB HID v1.10 Pointer [045e:001d] on usb1:7.1 hub.c: new USB device 00:02.1-1, assigned address 3 usb.c: USB device 3 (vend/prod 0x46d/0x840) is not claimed by any active driver. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [fglrx] module loaded - fglrx 2.9.13 [Jun 12 2003] on minor 0 Fire GL built-in AGP-support Based on agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 512M @ 0xa0000000 [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset) AGP: Found 2 AGPv2 devices AGP: Doing enable for AGPv2 [fglrx] To use AGP on this CPU with this kernel, you really should have 4MB pages disabled. Use `mem=nopentium` on the bootloader commandline. [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps) [fglrx] free AGP = 524562432 [fglrx] max AGP = 524562432 [fglrx] free LFB = 49283072 [fglrx] max LFB = 49283072 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 keyboard: Timeout - AT keyboard not present?(f4) keyboard: Timeout - AT keyboard not present?(f4) Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0 (scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 (scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16) sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray keyboard: Timeout - AT keyboard not present?(f4) mtrr: no MTRR for c0000000,400000 found mtrr: no MTRR for c0400000,200000 found mtrr: no MTRR for c0600000,100000 found [fglrx] free AGP = 524562432 [fglrx] max AGP = 524562432 [fglrx] free LFB = 49283072 [fglrx] max LFB = 49283072 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 keyboard: Timeout - AT keyboard not present?(f4) keyboard: Timeout - AT keyboard not present?(f4) keyboard: Timeout - AT keyboard not present?(f4) mtrr: no MTRR for c0000000,400000 found mtrr: no MTRR for c0400000,200000 found mtrr: no MTRR for c0600000,100000 found [fglrx] module unloaded - fglrx 2.9.13 [Jun 12 2003] on minor 0 [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [fglrx] module loaded - fglrx 2.9.13 [Jun 12 2003] on minor 0 Fire GL built-in AGP-support Based on agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 512M @ 0xa0000000 [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset) AGP: Found 2 AGPv2 devices AGP: Doing enable for AGPv2 [fglrx] To use AGP on this CPU with this kernel, you really should have 4MB pages disabled. Use `mem=nopentium` on the bootloader commandline. [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps) [fglrx] free AGP = 524562432 [fglrx] max AGP = 524562432 [fglrx] free LFB = 49283072 [fglrx] max LFB = 49283072 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 --EeQfGwPcQSOJBaQU Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="lspci-2.4.txt" 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology: Unknown device 5002 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 01:0a.0 SCSI storage controller: Adaptec AHA-2940U2/U2W Subsystem: Adaptec AHA-2940U2W SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:0b.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corp.: Unknown device 3013 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01) Subsystem: ATI Technologies Inc: Unknown device 0003 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-