Linux version 2.6.0-test5 (venza@tabr) (gcc version 3.3.1 20030626 (Debian prerelease)) #4 Wed Sep 10 12:59:26 CEST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001dfea000 (usable) BIOS-e820: 000000001dfea000 - 000000001dfef000 (ACPI data) BIOS-e820: 000000001dfef000 - 000000001dfff000 (reserved) BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 479MB LOWMEM available. On node 0 totalpages: 122858 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 118762 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6e10 ACPI: RSDT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1dfea000 ACPI: FADT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1dfea080 ACPI: BOOT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1dfea040 ACPI: DSDT (v001 ASUS L3000D 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: MADT not present Building zonelist for node : 0 Kernel command line: root=/dev/hda3 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1674.442 MHz processor. Console: colour VGA+ 80x25 Memory: 482772k/491432k available (1889k kernel code, 7868k reserved, 782k data, 136k init, 0k highmem) Calibrating delay loop... 3309.56 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP-M 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1673.0401 MHz. ..... host bus clock speed is 267.0744 MHz. NET: Registered protocol family 16 spurious 8259A interrupt: IRQ7. PCI: PCI BIOS revision 2.10 entry at 0xf1050, last bus=1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030813 tbget-0292: *** Info: Table [DSDT] replaced by host OS tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................................................................................................................... Table [DSDT](id F004) - 558 Objects with 54 Devices 196 Methods 22 Regions ACPI Namespace successfully loaded at root c03d069c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000E420 on int 9 evgpeblk-0748 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000E430 on int 9 Completing Region/Field/Buffer/Package initialization:.................................................................... Initialized 22/22 Regions 0/0 Fields 21/21 Buffers 25/25 Packages (566 nodes) Executing all Device _STA and_INI methods:....................................................... 55 Devices found containing: 55 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 11 14 15, enabled at IRQ 9) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FN0] (on) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf40, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 powernow: AMD K7 CPU detected. powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: Found PSB header at c00f0320 powernow: Table version: 0x12 powernow: Flags: 0x0 (Mobile voltage regulator) powernow: Settling Time: 100 microseconds. powernow: Has 1 PST tables. (Only dumping ones relevant to this CPU). powernow: PST:0 (@c00f0330) powernow: cpuid: 0x781 fsb: 133 maxFID: 0x3 startvid: 0xb powernow: FID: 0x12 (4.0x [532MHz]) VID: 0x13 (1.200V) powernow: FID: 0x4 (5.0x [665MHz]) VID: 0x13 (1.200V) powernow: FID: 0x8 (7.0x [931MHz]) VID: 0x13 (1.200V) powernow: FID: 0xc (9.0x [1197MHz]) VID: 0xe (1.300V) powernow: FID: 0x0 (11.0x [1463MHz]) VID: 0xc (1.400V) powernow: FID: 0x3 (12.5x [1662MHz]) VID: 0xb (1.450V) powernow: Minimum speed 532 MHz. Maximum speed 1662 MHz. devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FAN0] (on) ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [THRM] (57 C) Asus Laptop ACPI Extras version 0.24a L3D model detected, supported Notify Handler installed successfully Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 740 chipset agpgart: Maximum main memory to use for agp memory: 409M agpgart: AGP aperture is 64M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Using anticipatory scheduling io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 sis900.c: v1.08.06 9/24/2002 eth0: ICS LAN PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:6c:29:6e. PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > end_request: I/O error, dev hdc, sector 0 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: Synaptics Synaptics TouchPad on isa0060/serio4 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. pmdisk: Resume From Partition: /dev/hda2, Device: hda2 pmdisk: Invalid partition type. Resume Machine: Error -22 resuming PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Adding 3654748k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda3, internal journal NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver intel8x0: clocking to 48000 i2c-sis96x version 1.0.0 EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2 EXT2-fs warning (device hda6): ext2_fill_super: mounting ext3 filesystem as ext2 NTFS driver 2.1.4 [Flags: R/O MODULE]. NTFS volume version 3.0. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: irq 5, pci mem de9f7000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:0: USB hub found hub 1-0:0: 6 ports detected ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 ohci-hcd 0000:00:03.0: OHCI Host Controller ohci-hcd 0000:00:03.0: irq 11, pci mem dea11000 ohci-hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected ohci-hcd 0000:00:03.1: OHCI Host Controller ohci-hcd 0000:00:03.1: irq 5, pci mem dea26000 ohci-hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 hub 3-0:0: USB hub found hub 3-0:0: 2 ports detected ohci-hcd 0000:00:03.2: OHCI Host Controller ohci-hcd 0000:00:03.2: irq 11, pci mem dea28000 ohci-hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 hub 4-0:0: USB hub found hub 4-0:0: 2 ports detected Disabled Privacy Extensions on device c036c0e0(lo) eth0: Media Link On 10mbps half-duplex eth0: no IPv6 routers present