From: Jeff Garzik <jgarzik@pobox.com>
To: torvalds@osdl.org
Cc: netdev@oss.sgi.com, linux-kernel@vger.kernel.org
Subject: [bk patches] 2.6.x net driver updates
Date: Sat, 20 Sep 2003 15:27:50 -0400 [thread overview]
Message-ID: <20030920192750.GA27666@gtf.org> (raw)
First queue push after return from Silly Valley.
Linus, please do a
bk pull bk://kernel.bkbits.net/jgarzik/net-drivers-2.5
Patch is also available at:
ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.0-test5-bk7-netdrvr1.patch.bz2
This will update the following files:
drivers/net/irda/smc-ircc.c | 1258 ----------------------------------
drivers/net/irda/toshoboe.c | 957 -------------------------
Documentation/networking/bonding.txt | 4
drivers/net/3c501.c | 6
drivers/net/3c505.c | 12
drivers/net/3c515.c | 1
drivers/net/Space.c | 4
drivers/net/acenic.c | 3
drivers/net/bonding/bond_alb.c | 150 +++-
drivers/net/bonding/bond_alb.h | 8
drivers/net/bonding/bond_main.c | 1202 ++++++++++++++++++++------------
drivers/net/bonding/bonding.h | 4
drivers/net/cs89x0.c | 1
drivers/net/depca.c | 944 ++++++++++++-------------
drivers/net/e1000/e1000_main.c | 13
drivers/net/eepro.c | 6
drivers/net/ewrk3.c | 5
drivers/net/hamradio/baycom_par.c | 1
drivers/net/hamradio/baycom_ser_fdx.c | 1
drivers/net/hamradio/baycom_ser_hdx.c | 1
drivers/net/hamradio/hdlcdrv.c | 1
drivers/net/hamradio/scc.c | 208 +++--
drivers/net/hamradio/yam.c | 1
drivers/net/ibmlana.c | 1
drivers/net/irda/Kconfig | 24
drivers/net/irda/Makefile | 2
drivers/net/irda/ali-ircc.c | 84 --
drivers/net/irda/donauboe.c | 50 -
drivers/net/irda/irda-usb.c | 44 -
drivers/net/irda/nsc-ircc.c | 78 --
drivers/net/irda/sir_kthread.c | 4
drivers/net/irda/via-ircc.c | 92 --
drivers/net/irda/w83977af_ir.c | 54 -
drivers/net/lance.c | 10
drivers/net/mace.c | 1
drivers/net/ne2.c | 1
drivers/net/ni5010.c | 5
drivers/net/ni52.c | 5
drivers/net/ni65.c | 1
drivers/net/ns83820.c | 10
drivers/net/pcmcia/com20020_cs.c | 41 -
drivers/net/rcpci45.c | 4
drivers/net/rrunner.c | 17
drivers/net/rrunner.h | 1
drivers/net/sb1000.c | 1
drivers/net/sis900.c | 1
drivers/net/sk98lin/h/skdrv1st.h | 4
drivers/net/sk98lin/skge.c | 1
drivers/net/sk_mca.h | 2
drivers/net/skfp/h/targetos.h | 1
drivers/net/smc9194.c | 1
drivers/net/tokenring/lanstreamer.h | 2
drivers/net/tokenring/proteon.c | 2
drivers/net/tokenring/skisa.c | 2
drivers/net/tokenring/smctr.c | 1
drivers/net/tokenring/tms380tr.c | 1
drivers/net/wan/comx-hw-comx.c | 1
drivers/net/wan/comx-hw-locomx.c | 1
drivers/net/wan/comx-hw-mixcom.c | 1
drivers/net/wan/comx-hw-munich.c | 1
drivers/net/wan/comx-proto-fr.c | 1
drivers/net/wan/comx-proto-lapb.c | 1
drivers/net/wan/comx-proto-ppp.c | 1
drivers/net/wan/comx.c | 1
drivers/net/wan/cycx_x25.c | 1
drivers/net/wan/dlci.c | 1
drivers/net/wan/dscc4.c | 1
drivers/net/wan/lmc/lmc_ver.h | 2
drivers/net/wan/pc300_drv.c | 1
drivers/net/wan/pc300_tty.c | 1
drivers/net/wan/sbni.c | 20
drivers/net/wan/sdla_chdlc.c | 1
drivers/net/wan/sdla_fr.c | 1
drivers/net/wan/sdla_ft1.c | 1
drivers/net/wan/sdla_ppp.c | 1
drivers/net/wan/sdla_x25.c | 1
drivers/net/wan/sdladrv.c | 1
drivers/net/wan/sdlamain.c | 1
drivers/net/wan/sealevel.c | 157 ++--
drivers/net/wan/wanpipe_multppp.c | 1
drivers/net/wd.c | 5
drivers/net/wireless/airo.c | 11
drivers/net/wireless/arlan-proc.c | 3
drivers/net/wireless/arlan.c | 1
drivers/net/wireless/arlan.h | 1
drivers/net/wireless/strip.c | 1
include/net/syncppp.h | 7
87 files changed, 1799 insertions(+), 3769 deletions(-)
through these ChangeSets:
<shemminger@osdl.org> (03/09/20 1.1386)
[PATCH] Road Runner HIPPI driver (rrunner)
Small clean up, to use current APIs.
<achirica@telefonica.net> (03/09/20 1.1385)
[wireless airo] Fix MIC support with CryptoAPI
<achirica@telefonica.net> (03/09/20 1.1384)
[wireless airo] fix PCI probe
<jochen@scram.de> (03/09/20 1.1383)
[tokenring] fix breakage in proteon, skisa
this one fixes both drivers. They have been broken since the
reorganization in June. Unfortunately, my major build platform (alpha) had
some issues with later 2.5.X kernels (cache problems causing all kind of
funny behaviour), so i waited until these problems had been resolved by
the alpha gurus :-/...
In the mean time i also upgraded pine. I hope the patch corruption issue
is resolved by now.
<shemminger@osdl.org> (03/09/20 1.1382)
[PATCH] hamradio/scc -
Update hamradio/scc for 2.6.0-test5
- use seq_file for /proc
- get rid of dev_get()
- use alloc_netdev
Don't have hardware, but can load/unload the module fine.
<amir.noam@intel.com> (03/09/20 1.1381)
[PATCH] [bonding] Convert /proc to seq_file
This patch converts /proc/net/bondX/info into /proc/net/bonding/bondX
using the seq_file interface.
This is based on Stephen's recent patch, but slightly modified to work
with the propagation patch set and with some locking changes to make it
simpler.
The patch applies both on 2.4 (after the sync set from earlier today)
and on 2.6 (after the propagation set from 2003/11/9).
Amir
<bunk@fs.tum.de> (03/09/20 1.1380)
[PATCH] fix sbni.c compile with gcc 3.3
sbni.c in 2.6.0-test5 fails to compile with gcc 3.3 with the following
error:
<-- snip -->
...
CC drivers/net/wan/sbni.o
...
drivers/net/wan/sbni.c: In function `calc_crc32':
drivers/net/wan/sbni.c:1568: error: asm-specifier for variable `_crc'
conflicts with asm clobber list
make[3]: *** [drivers/net/wan/sbni.o] Error 1
<-- snip -->
Below is the patch by Margit Schubert-White to fix this issue (it is
already in 2.4).
cu
Adrian
<akpm@osdl.org> (03/09/20 1.1379)
[PATCH] e1000 bug
Rick Lindsley <ricklind@us.ibm.com> wrote:
>
> since it's been out for a while you probably already know, but the patch
> for e1000_main.c has a bug in it. Looks like it will fail at line 1550 if
> compiled with NETIF_F_TSO defined.
>
So it will. I blame the gcc developers.
25-akpm/drivers/net/e1000/e1000_main.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
<amir.noam@intel.com> (03/09/20 1.1378)
[PATCH] [bonding 2.6] Fix ipx_hdr compile error
<amir.noam@intel.com> (03/09/20 1.1377)
[PATCH] [bonding 2.6] Add missing free_netdev()
<amir.noam@intel.com> (03/09/20 1.1376)
[PATCH] [bonding 2.6] Enhance netdev notification handling
<amir.noam@intel.com> (03/09/20 1.1375)
[PATCH] [bonding 2.6] Consolidate /proc code, add CHANGENAME handler
<amir.noam@intel.com> (03/09/20 1.1374)
[PATCH] [bonding 2.6] Add support for changing HW address in ALB/TLB modes
<amir.noam@intel.com> (03/09/20 1.1373)
[PATCH] [bonding 2.6] Add support for changing HW address and MTU
<amir.noam@intel.com> (03/09/20 1.1372)
[PATCH] [bonding 2.6] Decouple promiscuous handling from multicast mode setting
<amir.noam@intel.com> (03/09/20 1.1371)
[PATCH] [bonding 2.6] fix assign_current_slave
<amir.noam@intel.com> (03/09/20 1.1370)
[PATCH] [bonding 2.6] consolidate change_active operations
<shemminger@osdl.org> (03/09/20 1.1369)
[PATCH] update arcnet/pcmcia driver
Redo of earlier patch to get rid of MOD_INC/DEC and use alloc_netdev.
This is against 2.6.0-test5 bk latest.
<shemminger@osdl.org> (03/09/20 1.1368)
[PATCH] sealevel wan driver
Update sealevel driver to match current net_device interface:
- dynamically allocate netdevice and private data.
- get rid of MOD_INC/DEC
- if_ptr not used
- bugfix: not all of board structure was being zeroed.
Note: this driver still doesn't probe() correctly since it just assumes that
if loaded the hardware is there!
Since I don't have one of these boards...
tested it by #ifdef'ing out all the bits that touch actual hardware.
<shemminger@osdl.org> (03/09/20 1.1367)
[IrDA] ali-ircc -- dev_alloc cleanout
Convert ali-ircc driver to:
- use alloc_net_dev not dev_alloc
- allocate private data at same time
- cleanup error unwinds
- call free_netdev.
Builds and loads, but don't have real hardware.
<shemminger@osdl.org> (03/09/20 1.1366)
[IrDA] via-ircc -- dev_alloc cleanout
Convert via-ircc 2.6.0-test5
- use alloc_net_dev not dev_alloc
- allocate private data at same time
- cleanup error unwinds
- call free_netdev.
Builds and loads, but don't have real hardware.
<shemminger@osdl.org> (03/09/20 1.1365)
[IrDA] nsc-ircc -- dev_alloc cleanout
Cleanup nsc-ircc driver for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- use private data allocated with alloc_netdev
- error unwind cleanup
<shemminger@osdl.org> (03/09/20 1.1364)
[IrDA] donahoboe -- dev_alloc cleanout
Fixes for donauboe for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- error unwind cleanup
<shemminger@osdl.org> (03/09/20 1.1363)
[IrDA] w83977af -- dev_alloc cleanout
Yet another irda driver cleanup for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- use private data allocated with alloc_netdev
- use free_netdev
<shemminger@osdl.org> (03/09/20 1.1362)
[IrDA] irda-usb -- dev_alloc cleanout
Update irda-usb for 2.6.0-test5
- use alloc_netdev (but can't use dev->priv area cause that is allocated elsewhere).
<rddunlap@osdl.org> (03/09/20 1.1361)
[PATCH] janitor: ns83820 error handling
Subject: Re: [Kernel-janitors] [PATCH] insert missing free_irq and fix cleanup path
From: Leann Ogasawara <ogasawara@osdl.org>
On Thu, 2003-09-04 at 13:17, Benjamin LaHaise wrote:
> The if()s before free are redundant, turf them and it's good.
<rddunlap@osdl.org> (03/09/20 1.1360)
[PATCH] janitor: insert a missing iounmap()
From: Leann Ogasawara <ogasawara@osdl.org>
Subject: [Kernel-janitors] [PATCH] insert missing iounmap()
Patch inserts a missing iounmap().
<shemminger@osdl.org> (03/09/20 1.1359)
[PATCH] get rid of old IRDA drivers.
According to Jean the toshoboe and old smc ircc drivers are no longer needed.
This patch removes them from 2.6.0-test5
<chrisw@osdl.org> (03/09/20 1.1358)
[netdrvr] use cpu_relax() in busy loop, or mdelay instead of busy loop
Replace busy loop nop with cpu_relax(), and just use mdelay where it's better.
<rddunlap@osdl.org> (03/09/20 1.1357)
[PATCH] janitor: remove (or add) unneeded includes (drivers/net/)
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1356)
[PATCH] janitor: remove unneeded includes (hamradio)
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1355)
[PATCH] janitor: remove (or add) unneeded includes (wireless)
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1354)
[PATCH] janitor: remove unneeded includes (skfp)
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1353)
[PATCH] janitor: remove (or add) unneeded includes
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1352)
[PATCH] janitor: remove unneeded includes (sk98lin)
From: Randy Hron <rwhron@earthlink.net>
<rddunlap@osdl.org> (03/09/20 1.1351)
[PATCH] janitor: remove unneeded includes (tokenring)
From: Randy Hron <rwhron@earthlink.net>
<shemminger@osdl.org> (03/09/20 1.1350)
[PATCH] replace sppp_of macro with inline
Replace macro with inline and get some type checking.
<felipewd@terra.com.br> (03/09/20 1.1349)
[PATCH] Unneeded memory barrier in net/irda code
<mzyngier@freesurf.fr> (03/09/20 1.1348)
[PATCH] depca update
I finally found some time to hack the depca driver, in basically the
same way I did with the de4x5 driver. The patch is quite big (shuffles
a lot of code around, removes lots of global variables), mainly in
order to use the driver model on every bus supported by this driver.
I also removed the probing from Space.c, so the usual warning about
device renumbering applies.
Tested on alpha (DE422, EISA) and i386 (two DE201, ISA), built-in and
modular. The MCA part is completly untested, since I lack the hardware
(no, I do not own every single piece of junk hardware out
there... ;-).
next reply other threads:[~2003-09-20 19:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-20 19:27 Jeff Garzik [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-03-05 18:44 [BK PATCHES] 2.6.x net driver updates Jeff Garzik
2004-10-30 13:32 Jeff Garzik
2003-10-14 19:06 Jeff Garzik
2003-09-27 11:55 Jeff Garzik
2003-09-26 1:02 [bk patches] " Jeff Garzik
2003-08-08 0:05 Jeff Garzik
2003-08-08 1:36 ` William Enck
2003-08-08 1:41 ` Jeff Garzik
2003-08-08 2:04 ` William Enck
2003-08-08 3:01 ` William Enck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030920192750.GA27666@gtf.org \
--to=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).