From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261662AbTI0AMC (ORCPT ); Fri, 26 Sep 2003 20:12:02 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261736AbTI0AMC (ORCPT ); Fri, 26 Sep 2003 20:12:02 -0400 Received: from xs.heimsnet.is ([193.4.194.50]:61951 "EHLO cg.c.is") by vger.kernel.org with ESMTP id S261662AbTI0ALy (ORCPT ); Fri, 26 Sep 2003 20:11:54 -0400 From: =?iso-8859-1?q?B=F6rkur=20Ingi=20J=F3nsson?= Reply-To: bugsy@isl.is To: linux-kernel@vger.kernel.org Subject: Re: khubd is a Succubus! Date: Sat, 27 Sep 2003 00:23:37 +0000 User-Agent: KMail/1.5.3 References: <200309261724.56616.bugsy@isl.is> <200309262114.46531.bugsy@isl.is> <20030926211239.GA18220@kroah.com> In-Reply-To: <20030926211239.GA18220@kroah.com> Cc: Greg KH MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200309270023.37987.bugsy@isl.is> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org > > Again, can you do this without the nvidia driver? With it installed, no > one here will be able to help you out. > > And I didn't see anything unusual in your kernel logs either. Does the > USB keyboard work ok? > > thanks, > > greg k-h > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ alright I removed the nvidia stuff and recompiled an new kernel here is my new dmesg: bash-2.05b$ dmesg Linux version 2.6.0-test5 (root@localhost) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r1, propolice)) #7 Sat Sep 27 00:11:39 GMT 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 767MB LOWMEM available. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: root /dev/hda3 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1395.251 MHz processor. Console: colour VGA+ 80x25 Memory: 773920k/786368k available (2605k kernel code, 11656k reserved, 910k data, 128k init, 0k highmem) Calibrating delay loop... 2744.32 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 04 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 pty: 256 Unix98 ptys configured Machine check exception polling timer started. devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.4 [Flags: R/O]. udf: registering filesystem Applying VIA southbridge workaround. request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling). parport_pc: Via 686A parallel port: io=0x378 Using anticipatory scheduling io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) PCI: Found IRQ 11 for device 0000:00:0a.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0a.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xec00. Vers LK1.1.19 eth0: Dropping NETIF_F_SG since no checksum feature. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: WDC WD800BB-00CAA1, ATA DISK drive hdd: CD-ROM 56X L, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 end_request: I/O error, dev hdd, sector 0 hdd: ATAPI 56X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 9 for device 0000:00:07.2 PCI: Sharing IRQ 9 with 0000:00:07.3 uhci-hcd 0000:00:07.2: UHCI Host Controller uhci-hcd 0000:00:07.2: irq 9, io base 0000d400 uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.2: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.0-test5 uhci-hcd usb usb1: SerialNumber: 0000:00:07.2 drivers/usb/core/usb.c: usb_hotplug usb usb1: usb_new_device - registering interface 1-0:0 drivers/usb/core/usb.c: usb_hotplug hub 1-0:0: usb_probe_interface hub 1-0:0: usb_probe_interface - got id hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected hub 1-0:0: standalone hub hub 1-0:0: ganged power switching hub 1-0:0: global over-current protection hub 1-0:0: Port indicators are not supported hub 1-0:0: power on to power good time: 2ms hub 1-0:0: hub controller current requirement: 0mA hub 1-0:0: local power source is good hub 1-0:0: no over-current condition exists hub 1-0:0: enabling power on all ports PCI: Found IRQ 9 for device 0000:00:07.3 PCI: Sharing IRQ 9 with 0000:00:07.2 uhci-hcd 0000:00:07.3: UHCI Host Controller uhci-hcd 0000:00:07.3: irq 9, io base 0000d800 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.3: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.0-test5 uhci-hcd usb usb2: SerialNumber: 0000:00:07.3 drivers/usb/core/usb.c: usb_hotplug usb usb2: usb_new_device - registering interface 2-0:0 drivers/usb/core/usb.c: usb_hotplug hub 2-0:0: usb_probe_interface hub 2-0:0: usb_probe_interface - got id hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected hub 2-0:0: standalone hub hub 2-0:0: ganged power switching hub 2-0:0: global over-current protection hub 2-0:0: Port indicators are not supported hub 2-0:0: power on to power good time: 2ms hub 2-0:0: hub controller current requirement: 0mA hub 2-0:0: local power source is good hub 2-0:0: no over-current condition exists hub 2-0:0: enabling power on all ports drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 PCI: Found IRQ 5 for device 0000:00:07.5 PCI: Setting latency timer of device 0000:00:07.5 to 64 hub 1-0:0: port 1, status 101, change 3, 12 Mb/s hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 1, assigned address 2 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 1-1: Product: USB Keyboard usb 1-1: Manufacturer: BTC drivers/usb/core/usb.c: usb_hotplug usb 1-1: usb_new_device - registering interface 1-1:0 drivers/usb/core/usb.c: usb_hotplug hub 1-1:0: usb_probe_interface hub 1-1:0: usb_probe_interface - got id hub 1-1:0: USB hub found hub 1-1:0: 2 ports detected hub 1-1:0: compound device; port removable status: FR hub 1-1:0: individual port power switching hub 1-1:0: individual port over-current protection hub 1-1:0: Port indicators are not supported hub 1-1:0: power on to power good time: 44ms hub 1-1:0: hub controller current requirement: 100mA hub 1-1:0: local power source is lost (inactive) hub 1-1:0: no over-current condition exists hub 1-1:0: enabling power on all ports hub 1-0:0: port 2, status 100, change 3, 12 Mb/s hub 1-0:0: port 2 enable change, status 100 hub 2-0:0: port 1, status 100, change 3, 12 Mb/s hub 2-0:0: port 2, status 100, change 3, 12 Mb/s hub 2-0:0: port 1 enable change, status 100 hub 2-0:0: port 2 enable change, status 100 hub 1-1:0: port 1, status 101, change 1, 12 Mb/s ALSA device list: #0: VIA 82C686A/B rev50 at 0xdc00, irq 5 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 1, assigned address 3 usb 1-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 3 default language ID 0x409 usb 1-1.1: Product: USB Keyboard usb 1-1.1: Manufacturer: BTC drivers/usb/core/usb.c: usb_hotplug usb 1-1.1: usb_new_device - registering interface 1-1.1:0 drivers/usb/core/usb.c: usb_hotplug hid 1-1.1:0: usb_probe_interface hid 1-1.1:0: usb_probe_interface - got id found reiserfs format "3.6" with standard journal drivers/usb/host/uhci-hcd.c: d800: suspend_hc spurious 8259A interrupt: IRQ7. Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 128k freed Adding 305224k swap on /dev/hda2. Priority:-1 extents:1 drivers/usb/input/hid-core.c: ctrl urb status -104 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.00 Keyboard [BTC USB Keyboard] on usb-0000:00:07.2-1.1 usb 1-1.1: usb_new_device - registering interface 1-1.1:1 drivers/usb/core/usb.c: usb_hotplug hid 1-1.1:1: usb_probe_interface hid 1-1.1:1: usb_probe_interface - got id and My keyboard works fine :) also here is some other info I thought might be usefull Linux localhost 2.6.0-test5 #7 Sat Sep 27 00:11:39 GMT 2003 i686 AMD Athlon(tm) Processor AuthenticAMD GNU/Linux Gnu C 3.2.3 Gnu make 3.80 util-linux 2.11z mount 2.11z e2fsprogs 1.33 reiserfsprogs 3.6.8 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.9 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0.15