From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263911AbTI2RcH (ORCPT ); Mon, 29 Sep 2003 13:32:07 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263915AbTI2Rbp (ORCPT ); Mon, 29 Sep 2003 13:31:45 -0400 Received: from fep03.swip.net ([130.244.199.131]:678 "EHLO fep03-svc.swip.net") by vger.kernel.org with ESMTP id S263911AbTI2RbA convert rfc822-to-8bit (ORCPT ); Mon, 29 Sep 2003 13:31:00 -0400 From: "Michal Semler (volny.cz)" Reply-To: cijoml@volny.cz To: "Randy.Dunlap" Subject: Re: 3C59x module doesn't work in 2.6.0-test6 Date: Mon, 29 Sep 2003 19:30:57 +0200 User-Agent: KMail/1.5.4 References: <200309281502.38370.cijoml@volny.cz> <20030929101453.18c804dd.rddunlap@osdl.org> In-Reply-To: <20030929101453.18c804dd.rddunlap@osdl.org> Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200309291930.57987.cijoml@volny.cz> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I call simply "modprobe 3c59x" as always. In all previous kernels before 2.6.0-test6 it worked (2.4,2.2) /etc/modprobe.conf alias eth0 3c59x options 3c59x 3c509x debug=0 options=4,8 It's generated from /etc/modules.conf in 2.4 alias eth0 3c59x options 3c59x 3c509x debug=0 options=4,8 And looks the same Info about card from 2.4.22: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.18-ac 00:50:04:6a:58:cd, IRQ 10 product code 544e rev 00.9 date 02-17-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 01:0a.0: scatter/gather enabled. h/w checksums enabled Michal Dne po 29. záøí 2003 19:14 jste napsal(a): > On Sun, 28 Sep 2003 15:02:38 +0200 "Michal Semler (volny.cz)" wrote: > | Hi, > | > | I compiled 2.6.0-test6, but my ethernet card doesn't work: > | > | modprobe 3c59x tells this: > | Sep 28 10:06:58 tata kernel: 3c59x: Unknown parameter `3c509x' > > So 3c59x complains about '3c509x' ?? > > Did you use any module parameters, either on the modprobe command > or in the /etc/modprobe.conf file? > > -- > ~Randy