linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: xcytame <xcytame@yahoo.es>
To: Martin Willemoes Hansen <mwh@sysrq.dk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Airo Net 340 PCMCIA WiFi Card trouble
Date: Sun, 26 Oct 2003 03:34:31 +0100	[thread overview]
Message-ID: <200310260334.31185.xcytame@yahoo.es> (raw)
In-Reply-To: <1067096661.214.35.camel@hugoboss.sysrq.dk>

Well, we had some advance :-)

I have really no clue about what can cause your system getting no interrupt 
free for pcmcia. 

>>airo: register interrupt 0 failed, rc -16

Googling for "pcmcia-cs register interrupt 0 failed" i found this:
http://www.linuxquestions.org/questions/archive/3/2003/07/4/48965 where it 
points to a ISA related issue.

>Possable sollution.
>
>I had a similar problem.
>
>It seems the Aironet cards is 16bit (not Cardbus) you must sellect ISA 
>support in the kernel for the cards to be recognized.
>(Under General setup)
>
>Hope it helps.
>
>Regards,
>Pieter

If it does not help you, i  can only point you to the pcmcia-cs documentation 
about interrupts at

 http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-5.html#ss5.2

hope it helps. ( tell us please :-)  )

On Saturday 25 October 2003 17:44, Martin Willemoes Hansen wrote:
> On Wed, 2003-09-03 at 16:36, tonildg wrote:
> > >> I solved it testing with memory ranges in the config.opts file that
> > >>comes with your pcmcia_cs version.
> > >>
> > >>   You have to play with them until one fits and boots. "I had to use
> > >>windows to see the memory adresses my cardbus used."
> >
> > < Umh can I check it out on Linux as well? And how? I can boot correctly
> >
> > > with 2.4.19.
> >
> >   I had to look to the windows cardbus device properties to get it work,
> > but i think that by playing with some values you can get it working too
> > without needing that crappy OS.
>
> Hmm after changing the memory address I seem to get a new problem :(
> Hope you can point me in the right direction.
>
> Settings in config.opts
> I changed the first include memory
> to the address I found in win98
> ----------------------------------
>
> # System resources available for PCMCIA devices
>
> include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
> include memory 0xc0030000-0xc003ffff
> include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
>
> # High port numbers do not always work...
> # include port 0x1000-0x17ff
>
> # Extra port range for IBM Token Ring
> include port 0xa00-0xaff
>
> # Resources we should not use, even if they appear to be available
>
> # First built-in serial port
> exclude irq 4
> # Second built-in serial port
> #exclude irq 3
> # First built-in parallel port
> exclude irq 7
>
> =====================================================================
>
> dmesg from: 2.4.19 (everything is okay here :o))
> ----------------------------------------------------------------
>
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0800-0x08ff: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x398-0x39f
> 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> cs: memory probe 0xc0030000-0xc003ffff: clean.
> airo:  Probing for PCI adapters
> airo:  Finished probing for PCI adapters
> airo: Doing fast bap_reads
> airo: MAC enabled eth0 0:40:96:45:75:51
> eth0: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f
>
> dmesg from: 2.4.22 (seems like IO port probe is missing here)
> ---------------------------------------------------------------------------
>-------
>
> cs: memory probe 0x60000000-0x60ffffff: clean.
> airo:  Probing for PCI adapters
> airo:  Finished probing for PCI adapters
> airo: register interrupt 0 failed, rc -16
> airo_cs: RequestConfiguration: Operation succeeded
>
>
> Anyone have an idea of what I might do to get the card going in 2.4.22?


  parent reply	other threads:[~2003-10-26  2:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-02 10:22 Airo Net 340 PCMCIA WiFi Card trouble Martin Willemoes Hansen
2003-09-02 10:36 ` Russell King
2003-09-02 10:59   ` Martin Willemoes Hansen
2003-09-03  3:09     ` tonildg
2003-09-03 12:23       ` Martin Willemoes Hansen
2003-09-03 14:36         ` tonildg
     [not found]           ` <1067096661.214.35.camel@hugoboss.sysrq.dk>
2003-10-26  2:34             ` xcytame [this message]
2003-11-29 16:14               ` Martin Willemoes Hansen
2003-09-02 15:53   ` Martin Willemoes Hansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200310260334.31185.xcytame@yahoo.es \
    --to=xcytame@yahoo.es \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mwh@sysrq.dk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).