From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263904AbTJ1Kat (ORCPT ); Tue, 28 Oct 2003 05:30:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263910AbTJ1Kat (ORCPT ); Tue, 28 Oct 2003 05:30:49 -0500 Received: from mx2.elte.hu ([157.181.151.9]:31467 "EHLO mx2.elte.hu") by vger.kernel.org with ESMTP id S263904AbTJ1K3q (ORCPT ); Tue, 28 Oct 2003 05:29:46 -0500 Date: Tue, 28 Oct 2003 11:29:45 +0100 From: Kovacs Richard To: linux-kernel@vger.kernel.org Subject: ACPI suspend doe snot work when X is running Message-ID: <20031028102944.GA5230@login.elte.hu> Reply-To: krichard@elte.hu Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="bp/iNruPH9dso1Pn" Content-Disposition: inline User-Agent: Mutt/1.3.28i Organization: Eotvos Lorand University, Budapest, Hungary Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Dear everybody, I think there were some posts about this in the past, but I wasn't able to find them in the archive. I have a Dell inspiron 2600, with Intel 830MG graphics card, using X server 4.2.1-12.1, built-in i810 driver. I was testing 2.6.0-test9, was trying to suspend. Without X it is working fine, but when I start X and try to suspend (by switching to console) then after a correct suspention resuming results in a blank screen or sometimes a debug message and a call trace, and nothing seems to work but the reboot button. I tried both 'echo -n disk >/sys/power/state' 'echo 4 >/proc/acpi/sleep' as well, the result as far as I can see is the same. I think it might have something to do with the modules agpgart, intel-agp, i830. Config, dmesg, lsmod, lspci and occasional call trace is attached. What shell I do to investigate further? Thanks, Richard --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Description: config-2.6.0-test9 Content-Disposition: attachment; filename="config-2.6.0-test9" # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_STANDALONE=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y # CONFIG_X86_UP_IOAPIC is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set CONFIG_I8K=y # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_DISK=y CONFIG_PM_DISK_PARTITION="/dev/hda3" # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_RELAXED_AML=y # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=m CONFIG_YENTA=m CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # # CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m # CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_VORTEX=m # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_PCIPS2=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_PS2_SYNAPTICS is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=128 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # # CONFIG_I2C is not set # # I2C Algorithms # # # I2C Hardware Bus support # # # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=m # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set CONFIG_DRM_I810=m CONFIG_DRM_I830=m # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=m CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # # CONFIG_CRC32 is not set CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Description: dmesg Content-Disposition: attachment; filename=dmesg Linux version 2.6.0-test9 (krichard@halamar) (gcc version 3.3.2 (Debian)) #1 Mon Oct 27 10:20:10 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable) BIOS-e820: 000000000f6f0000 - 000000000f6ff000 (ACPI data) BIOS-e820: 000000000f6ff000 - 000000000f700000 (ACPI NVS) BIOS-e820: 000000000f700000 - 000000000f780000 (usable) BIOS-e820: 000000000f780000 - 0000000010000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 247MB LOWMEM available. On node 0 totalpages: 63360 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 59264 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC. ACPI: RSDP (v000 PTLTD ) @ 0x000f68f0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0f6faf01 ACPI: FADT (v001 INTEL Almador 0x06040000 PTL 0x00000001) @ 0x0f6fef8c ACPI: DSDT (v001 COMPAL ALMADOR 0x06040000 MSFT 0x0100000d) @ 0x00000000 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=l260test9 ro root=305 hdc=ide-scsi resume=/dev/hda3 psmouse_noext noresume pmdisk=off ide_setup: hdc=ide-scsi Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1129.828 MHz processor. Console: colour VGA+ 80x25 Memory: 247288k/253440k available (1767k kernel code, 5360k reserved, 761k data, 128k init, 0k highmem) Calibrating delay loop... 2236.41 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(TM) CPU 1133MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9ca, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 28) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. ikconfig 0.7 with /proc/config* udf: registering filesystem ACPI-0178: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. ACPI-0181: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) pty: 256 Unix98 ptys configured i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.13 14/05/2002 Massimo Dal Zotto (dz@debian.org) request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.12 hw_random hardware driver 1.0.0 loaded Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N030ATCS04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-STCD-RW/DVD-ROM GCC-4240N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: RW/DVD GCC-4240N Rev: D110 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 Resume Machine: Resuming from device hda3 Resume Machine: This is normal swap space disabled PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda5: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 129224 ext3_orphan_cleanup: deleting unreferenced inode 80212 EXT3-fs: hda5: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 128k freed Adding 530136k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda5, internal journal Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 830M Chipset. agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized i830 1.3.2 20021108 on minor 0 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 10, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for Magic Control Technology USB-RS232 drivers/usb/core/usb.c: registered new driver mct_u232 drivers/usb/serial/mct_u232.c: Magic Control Technology USB-RS232 converter driver v1.1 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:01.0: 3Com PCI 3c905C Tornado at 0x3000. Vers LK1.1.19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0: clocking to 48000 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:04.0 [1028:00b8] Yenta: ISA IRQ list 00b8, PCI irq10 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3c0-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Description: lspci Content-Disposition: attachment; filename=lspci 00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04) Subsystem: Intel Corp.: Unknown device 1969 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) Capabilities: 00:02.0 VGA compatible controller: Intel Corp. 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.1 Display controller: Intel Corp. 82830 CGC [Chipset Graphics Controller] Subsystem: Dell Computer Corporation: Unknown device 00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corp.: Unknown device 4541 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02) Subsystem: Intel Corp.: Unknown device 4541 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: 02:04.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller Subsystem: Dell Computer Corporation: Unknown device 00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Description: lsmod Content-Disposition: attachment; filename=lsmod Module Size Used by ds 15236 2 yenta_socket 16896 0 pcmcia_core 67936 2 ds,yenta_socket hid 24832 0 snd_pcm_oss 52132 0 snd_mixer_oss 19456 1 snd_pcm_oss snd_seq_oss 34432 0 snd_seq_midi_event 7808 1 snd_seq_oss snd_seq 55824 4 snd_seq_oss,snd_seq_midi_event snd_intel8x0 31876 0 snd_ac97_codec 53124 1 snd_intel8x0 snd_pcm 98468 2 snd_pcm_oss,snd_intel8x0 snd_timer 25988 2 snd_seq,snd_pcm snd_page_alloc 12036 2 snd_intel8x0,snd_pcm snd_mpu401_uart 7808 1 snd_intel8x0 snd_rawmidi 25120 1 snd_mpu401_uart snd_seq_device 8584 3 snd_seq_oss,snd_seq,snd_rawmidi snd 51940 12 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device 3c59x 37672 0 mct_u232 10244 0 usbserial 28324 1 mct_u232 usb_storage 26752 0 uhci_hcd 31888 0 usbcore 109660 7 hid,mct_u232,usbserial,usb_storage,uhci_hcd i830 74796 0 intel_agp 18076 1 agpgart 31784 2 intel_agp --bp/iNruPH9dso1Pn Content-Type: text/plain; charset=us-ascii Content-Description: call trace Content-Disposition: attachment; filename=call_trace Stopping tasks: ==================================================| Freeing memory: ............................| hdc: start_power_step(step: 0) hdc: completing PM request, suspend hda: start_power_step(step: 0) hda: start_power_step(step: 1) hda: complete_power_step(step: 1, stat: 50, err: 0) hda: completing PM request, suspend PM: Attempting to suspend to disk PM: snapshotting memory. Debug: sleeping function called from invalid context at include/linux/rwsem.h:43 in_atomic():0, irqs_disabled():1 Call trace: [] do_page_fault+0x0/0x573 double fault, gdt at c0307f00 [255 bytes] double fault, tss at c0377800 eip = c012dbb3, esp = cbf89000 eax = c0118769, ebx = c0118769, edx = cbf89034 esi = 00000000, edi = c010ad4b --bp/iNruPH9dso1Pn--