From: Vladimir Klenov <maple@center.hqhost.net>
To: linux-kernel@vger.kernel.org
Subject: aic7xxx problem on sparc64 (2.6)
Date: Sat, 29 Nov 2003 10:40:18 +0200 [thread overview]
Message-ID: <200311290840.hAT8eIUH000605@valinor.localnet> (raw)
>I inserted my known working 2940 (7880) into a Sun Ultra 5 (32-bit PCI).
>modprobe aic7xxx gave some errors and asked to report the bug.
>modprobe sd_mod gave a lot more errors and put the disk offline. The
>same hardware (host, HBA and disk) works fine with latest 2.4 kernel
>(2.4.23-rc5 currently). The problem is with 2.6.0-test11.
similar problem with -test11 and aic79xx on x86
2.4 works ok, test11 give unrecoverable read errors, but with drivers from
http://people.FreeBSD.org/~gibbs/linux/SRC/ -test11 working fine.
do I have chance to include working drivers to official tree? ;)
I use software raid1 over two scsi drives.
lspci:
02:06.0 SCSI storage controller: Adaptec ASC-29320LP U320 (rev 03)
dmesg:
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.4
<Adaptec 29320LP Ultra320 SCSI adapter>
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
SY, Vladimir
next reply other threads:[~2003-11-29 8:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-29 8:40 Vladimir Klenov [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-11-28 14:04 aic7xxx problem on sparc64 (2.6) Meelis Roos
2003-11-28 17:27 ` Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200311290840.hAT8eIUH000605@valinor.localnet \
--to=maple@center.hqhost.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).