linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* PROBLEM
@ 2003-11-30  4:07 Mike Morrell
  2003-11-30  6:05 ` PROBLEM Chris Ernst
  0 siblings, 1 reply; 19+ messages in thread
From: Mike Morrell @ 2003-11-30  4:07 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 856 bytes --]

Scroll wheel on Mouseman+ mouse does not work with 2.6.0-test11. Works fine on 
2.4.22 kernel.

Mouse movement works, only scroll wheel is affected. Tried an Intellimouse and 
wheel works fine on both 2.4.22 and 2.6.0-test11. I did not see a kernel 
config option that would affect this.

Linux morrell1 2.6.0-test11 #1 SMP Sat Nov 29 22:40:11 EST 2003 i686 Intel(R) 
Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux

Gnu C                  3.3.2
Gnu make               3.80
util-linux             2.12
mount                  2.12
module-init-tools      0.9.15-pre3
e2fsprogs              1.34
xfsprogs               2.6.0
nfs-utils              1.0.6
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.14
Net-tools              1.60
Kbd                    1.08
Sh-utils               5.0.91
Modules Loaded

Gentoo distro


[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 23873 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_FW_LOADER=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C bit-banging
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Algorithms
#

#
# I2C Hardware Bus support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I830=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: PROBLEM
  2003-11-30  4:07 PROBLEM Mike Morrell
@ 2003-11-30  6:05 ` Chris Ernst
  0 siblings, 0 replies; 19+ messages in thread
From: Chris Ernst @ 2003-11-30  6:05 UTC (permalink / raw)
  To: m__morrell; +Cc: linux-kernel

Set the protocol to IMPS/2 in XF86Conig:

Option      "Protocol" "IMPS/2"

	- Chris

On Sat, 29 Nov 2003 23:07:32 -0500
Mike Morrell <m__morrell@yahoo.com> wrote:

> Scroll wheel on Mouseman+ mouse does not work with 2.6.0-test11. Works fine on 
> 2.4.22 kernel.
> 
> Mouse movement works, only scroll wheel is affected. Tried an Intellimouse and 
> wheel works fine on both 2.4.22 and 2.6.0-test11. I did not see a kernel 
> config option that would affect this.
> 
> Linux morrell1 2.6.0-test11 #1 SMP Sat Nov 29 22:40:11 EST 2003 i686 Intel(R) 
> Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux
> 
> Gnu C                  3.3.2
> Gnu make               3.80
> util-linux             2.12
> mount                  2.12
> module-init-tools      0.9.15-pre3
> e2fsprogs              1.34
> xfsprogs               2.6.0
> nfs-utils              1.0.6
> Linux C Library        2.3.2
> Dynamic linker (ldd)   2.3.2
> Procps                 3.1.14
> Net-tools              1.60
> Kbd                    1.08
> Sh-utils               5.0.91
> Modules Loaded
> 
> Gentoo distro
> 
> 

^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2007-04-27  1:35 Thomas Kayser
  0 siblings, 0 replies; 19+ messages in thread
From: Thomas Kayser @ 2007-04-27  1:35 UTC (permalink / raw)
  To: linux-pci, linux-kernel

PCI transparent bridge

This report is FYI, filed because of the kernel message.  Using the kernel 
parameter seems to work fine.

On boot there is a message that says this:

Kernel:PCI: Transparent bridge - 0000:00:1e.0
Kernel:PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) 
(try 'pci=assign-busses')

When I pass 'pci=assign-busses' to the kernel then the message is only this:

Kernel:PCI: Transparent bridge - 0000:00:1e.0

Keywords: pci transparent bridge

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/version
Linux version 2.6.20-04-26-07 (2.6.20-1) (root@debian5) (gcc version 4.1.2 
20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu Apr 26 04:15:26 CDT 2007

Scripts/ver_linux output:

Linux debian5 2.6.20-04-26-07 #1 SMP Thu Apr 26 04:15:26 CDT 2007 i686 
GNU/Linux

Gnu C                  4.1.2
Gnu make               3.81
binutils               2.17
util-linux             2.12r
mount                  2.12r
module-init-tools      3.3-pre2
e2fsprogs              1.40-WIP
pcmciautils            014
pcmcia-cs              3.2.8
Linux C Library        2.3.6
Dynamic linker (ldd)   2.3.6
Procps                 3.2.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.97
udev                   105
wireless-tools         28
Modules Loaded         rfcomm l2cap bluetooth nfsd exportfs nfs lockd nfs_acl 
sunrpc ppdev lp thermal fan button processor ac battery ipv6 sbp2 scsi_mod 
loop eth1394 pcmcia firmware_class snd_hda_intel snd_hda_codec snd_pcm_oss 
snd_mixer_oss snd_pcm snd_timer yenta_socket snd rsrc_nonstatic i2c_i801 
iTCO_wdt ide_cd soundcore snd_page_alloc cdrom pcspkr parport_pc parport 
uhci_hcd ehci_hcd i2c_core iTCO_vendor_support r8169 sdhci mmc_core ohci1394 
ieee1394 pcmcia_core intel_agp agpgart serio_raw rtc usbcore psmouse ext3 jbd 
mbcache ide_disk generic piix ide_core evdev

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz
stepping        : 6
cpu MHz         : 1828.883
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm 
constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3661.67
clflush size    : 64

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz
stepping        : 6
cpu MHz         : 1828.883
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm 
constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 3657.78
clflush size    : 64

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/modules
rfcomm 35288 0 - Live 0xf8d0d000
l2cap 22016 5 rfcomm, Live 0xf8c73000
bluetooth 48484 4 rfcomm,l2cap, Live 0xf8c8e000
nfsd 202672 17 - Live 0xf8d86000
exportfs 5568 1 nfsd, Live 0xf8c36000
nfs 219308 4 - Live 0xf8d4f000
lockd 58056 3 nfsd,nfs, Live 0xf8c7e000
nfs_acl 3520 2 nfsd,nfs, Live 0xf8c22000
sunrpc 148284 13 nfsd,nfs,lockd,nfs_acl, Live 0xf8ce7000
ppdev 8644 0 - Live 0xf8c67000
lp 11816 0 - Live 0xf8c41000
thermal 13832 0 - Live 0xf8c3c000
fan 4676 0 - Live 0xf8c2a000
button 7760 0 - Live 0xf8ae7000
processor 30008 1 thermal, Live 0xf8c2d000
ac 5124 0 - Live 0xf8af0000
battery 9860 0 - Live 0xf8aec000
ipv6 233184 14 - Live 0xf8cad000
sbp2 21380 0 - Live 0xf8c1b000
scsi_mod 132812 1 sbp2, Live 0xf8c45000
loop 15816 0 - Live 0xf8adc000
eth1394 18500 0 - Live 0xf8ae1000
pcmcia 35436 0 - Live 0xf8ac2000
firmware_class 9536 1 pcmcia, Live 0xf89fc000
snd_hda_intel 19608 0 - Live 0xf8a8e000
snd_hda_codec 151680 1 snd_hda_intel, Live 0xf8af3000
snd_pcm_oss 38944 0 - Live 0xf8ab7000
snd_mixer_oss 15424 1 snd_pcm_oss, Live 0xf89f7000
snd_pcm 71172 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8aa4000
snd_timer 20612 1 snd_pcm, Live 0xf89f0000
yenta_socket 24844 1 - Live 0xf89e8000
snd 48036 6 
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 
0xf8a81000
rsrc_nonstatic 12096 1 yenta_socket, Live 0xf896c000
i2c_i801 7500 0 - Live 0xf8970000
iTCO_wdt 10596 0 - Live 0xf893c000
ide_cd 36576 0 - Live 0xf89de000
soundcore 7520 1 snd, Live 0xf8924000
snd_page_alloc 9672 2 snd_hda_intel,snd_pcm, Live 0xf882c000
cdrom 32992 1 ide_cd, Live 0xf89d4000
pcspkr 3072 0 - Live 0xf894c000
parport_pc 32676 0 - Live 0xf89cb000
parport 33544 3 ppdev,lp,parport_pc, Live 0xf89c1000
uhci_hcd 21904 0 - Live 0xf8959000
ehci_hcd 29004 0 - Live 0xf8963000
i2c_core 20672 1 i2c_i801, Live 0xf8952000
iTCO_vendor_support 3844 1 iTCO_wdt, Live 0xf8865000
r8169 28424 0 - Live 0xf8942000
sdhci 17484 0 - Live 0xf891e000
mmc_core 25604 1 sdhci, Live 0xf8927000
ohci1394 32560 0 - Live 0xf8915000
ieee1394 89144 3 sbp2,eth1394,ohci1394, Live 0xf88d0000
pcmcia_core 37268 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xf88c5000
intel_agp 22684 1 - Live 0xf8869000
agpgart 30344 2 intel_agp, Live 0xf888c000
serio_raw 6660 0 - Live 0xf8840000
rtc 12464 0 - Live 0xf883b000
usbcore 121864 3 uhci_hcd,ehci_hcd, Live 0xf88eb000
psmouse 35016 0 - Live 0xf8882000
ext3 121416 3 - Live 0xf88a6000
jbd 55208 1 ext3, Live 0xf8873000
mbcache 8324 1 ext3, Live 0xf8837000
ide_disk 15552 5 - Live 0xf8832000
generic 4868 0 [permanent], Live 0xf8829000
piix 9476 0 [permanent], Live 0xf8807000
ide_core 111644 4 ide_cd,ide_disk,generic,piix, Live 0xf8843000
evdev 9280 5 - Live 0xf880b000

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
01f0-01f7 : 0000:00:1f.1
  01f0-01f7 : ide0
0250-025f : pnp 00:0b
0376-0376 : 0000:00:1f.1
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.1
  03f6-03f6 : ide0
0400-041f : 0000:00:1f.3
  0400-041f : i801_smbus
0480-04bf : 0000:00:1f.0
0800-087f : 0000:00:1f.0
  0800-0803 : ACPI PM1a_EVT_BLK
  0804-0805 : ACPI PM1a_CNT_BLK
  0808-080b : ACPI PM_TMR
  0810-0815 : ACPI CPU throttle
  0820-0820 : ACPI PM2_CNT_BLK
  0828-082f : ACPI GPE0_BLK
  0860-087f : iTCO_wdt
0a00-0a0f : pnp 00:09
0cf8-0cff : PCI conf1
c000-dfff : PCI Bus #03
  c000-c0ff : PCI CardBus #04
  c400-c4ff : PCI CardBus #04
  d800-d8ff : 0000:03:07.0
    d800-d8ff : r8169
e400-e41f : 0000:00:1d.3
  e400-e41f : uhci_hcd
e480-e49f : 0000:00:1d.2
  e480-e49f : uhci_hcd
e800-e81f : 0000:00:1d.1
  e800-e81f : uhci_hcd
e880-e89f : 0000:00:1d.0
  e880-e89f : uhci_hcd
ec00-ec07 : 0000:00:02.0
ffa0-ffaf : 0000:00:1f.1
  ffa0-ffa7 : ide0

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/iomem
00000000-0009fbff : System RAM
  00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3f7bffff : System RAM
  00100000-002979dc : Kernel code
  002979dd-00332233 : Kernel data
3f7c0000-3f7cdfff : ACPI Tables
3f7ce000-3f7fffff : ACPI Non-volatile Storage
40000000-43ffffff : PCI CardBus #04
44000000-47ffffff : PCI CardBus #04
bdf00000-bfefffff : PCI Bus #03
  bdf00000-bdf1ffff : 0000:03:07.0
d0000000-dfffffff : 0000:00:02.0
fdf00000-fdffffff : PCI Bus #02
  fdfff000-fdffffff : 0000:02:00.0
fe000000-fe8fffff : PCI Bus #03
  fe000000-fe000fff : 0000:03:01.0
    fe000000-fe000fff : yenta_socket
  fe8fec00-fe8fecff : 0000:03:07.0
    fe8fec00-fe8fecff : r8169
  fe8ff000-fe8ff0ff : 0000:03:01.3
  fe8ff400-fe8ff4ff : 0000:03:01.2
    fe8ff400-fe8ff4ff : sdhci:slot0
  fe8ff800-fe8fffff : 0000:03:01.1
    fe8ff800-fe8fffff : ohci1394
fea80000-feafffff : 0000:00:02.1
feb3bc00-feb3bfff : 0000:00:1d.7
  feb3bc00-feb3bfff : ehci_hcd
feb3c000-feb3ffff : 0000:00:1b.0
  feb3c000-feb3ffff : ICH HD audio
feb40000-feb7ffff : 0000:00:02.0
feb80000-febfffff : 0000:00:02.0
fee00000-fee00fff : reserved
ffb80000-ffffffff : reserved

This is one of wildly successful CBB notebook computers from 
LinuxCertified.com, the 14" display LC2210DC, or ASI S62FM

debian5:/usr/src/linux-source-2.6.20# lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
Express Memory Controller Hub (rev 03)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML 
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1252
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at ec00 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express 
Integrated Graphics Controller (rev 03)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1252
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at feb3c000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 02) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM Disabled RCB 64 bytes Disabled CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x0
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 2, PowerLimit 10.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable+
                Address: fee0300c  Data: 41b9
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 
1297
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 
(rev 02) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fdf00000-fdffffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 10.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable+
                Address: fee0300c  Data: 41c1
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 
1297
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at e880 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at e800 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at e480 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at e400 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at feb3bc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 
(prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: fe000000-fe8fffff
        Prefetchable memory behind bridge: 00000000bdf00000-00000000bfefffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 
1297

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
02)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 0400 [size=32]

02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network 
Connection (rev 02)
        Subsystem: Intel Corporation Unknown device 1000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 40000000-43fff000 (prefetchable)
        Memory window 1: 44000000-47fff000
        I/O window 0: 0000c000-0000c0ff
        I/O window 1: 0000c400-0000c4ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 
08) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin B routed to IRQ 18
        Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+

03:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 
SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at fe8ff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter 
(rev 08)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1297
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 4
        Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit 
Ethernet (rev 10)
        Subsystem: ASUSTeK Computer Inc. Unknown device 11e5
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at d800 [size=256]
        Region 1: Memory at fe8fec00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at bdf00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

tom@debian5:/usr/src/linux-source-2.6.20$ cat /proc/scsi/scsi
Attached devices:


-- 

Those who exalt human knowledge become laughing stock for The Sons of God.

^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2006-02-03 12:02 Badri Pillai
  0 siblings, 0 replies; 19+ messages in thread
From: Badri Pillai @ 2006-02-03 12:02 UTC (permalink / raw)
  To: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Problem summary: after upgrading to from 2.6.15.1 -> 2.6.15.2
the system dumps following trace, when trying to reboot through KDE 3.5:

- ------------[ cut here ]------------
kernel BUG at mm/swap.c:49!
invalid operand: 0000 [#2]
SMP
Modules linked in: nls_utf8 ntfs snd_rtctimer ipv6 fglrx ata_piix libata
radeonfb scsi_mod i2c_algo_bit ipw2100 ieee80211 ehci_hcd
ieee80211_crypt 8139cp i8xx_tco joydev snd_pcm_oss snd_mixer_oss
snd_seq_oss snd_seq_midi_event snd_seq_dummy snd_seq snd_seq_device
snd_intel8x0 snd_intel8x0m snd_ac97_codec snd_ac97_bus snd_pcm snd_timer
snd soundcore snd_page_alloc i2c_i801 i2c_core shpchp yenta_socket
rsrc_nonstatic ohci1394 ieee1394 video dm_mod iptable_filter
ipt_multiport ipt_state ip_conntrack nfnetlink ipt_LOG ip_tables sunrpc
pcmcia pcmcia_core autofs4 lp parport_pc parport 8139too mii
CPU:    0
EIP:    0060:[<c013fbce>]    Tainted: P    B VLI
EFLAGS: 00013256   (2.6.15.2_DL6)
EIP is at put_page+0x4a/0x66
eax: 00000000   ebx: c1471b48   ecx: c1471b48   edx: c1471b48
esi: c15849c0   edi: da1e69e8   ebp: 00000020   esp: db55eec8
ds: 007b   es: 007b   ss: 0068
Process X (pid: 1682, threadinfo=db55e000 task=c17fe570)
Stack: c0143a8b c147d394 00000000 ffffffff dd49aa40 db1480cc b7a7b000
dd4b5b78
       dd4b5b78 00000000 c0143bf8 b7a7a000 b7a7b000 db55ef48 00000000
b7a7b000
       dd4b5b78 db1480cc c15849c0 db55ef70 00000001 b7a7b000 b7a7a000
c0143d48
Call Trace:
 [<c0143a8b>] zap_pte_range+0x172/0x236
 [<c0143bf8>] unmap_page_range+0xa9/0xf8
 [<c0143d48>] unmap_vmas+0x101/0x1e2
 [<c0147606>] unmap_region+0x92/0xf8
 [<c0147877>] do_munmap+0xd9/0xef
 [<c01478dd>] sys_munmap+0x50/0x68
 [<c0102717>] sysenter_past_esp+0x54/0x75
Code: 0b 29 00 24 39 31 c0 f0 83 42 04 ff 0f 98 c0 84 c0 74 33 89 d0 ff
52 48 c3 8b 02 89 d1 f6 c4 40 74 03 8b 4a 0c 8b
41 04 40 75 08 <0f> 0b 31 00 24 39 31 c0 f0 83 42 04 ff 0f 98 c0 84 c0
74 07 89
 <3>Debug: sleeping function called from invalid context at
include/linux/rwsem.h:43
in_atomic():1, irqs_disabled():0
 [<c0118710>] __might_sleep+0x8a/0x94
 [<c011b6f4>] profile_task_exit+0x18/0x48
 [<c011cf34>] do_exit+0x17/0x34a
 [<c0103862>] do_divide_error+0x0/0x88
 [<c01039b0>] do_invalid_op+0x0/0x8b
 [<c0103a2f>] do_invalid_op+0x7f/0x8b
 [<c013fbce>] put_page+0x4a/0x66
 [<c01ba078>] avc_has_perm_noaudit+0x37/0xe3
 [<e1c93717>] drm_free+0xb7/0x150 [fglrx]
 [<e1c93717>] drm_free+0xb7/0x150 [fglrx]
 [<c0103273>] error_code+0x4f/0x54
 [<e1c9007b>] FGLDRM__vm_info+0xa0/0x16b [fglrx]
 [<e1c9007b>] FGLDRM__vm_info+0xa0/0x16b [fglrx]
 [<c013fbce>] put_page+0x4a/0x66
 [<c0143a8b>] zap_pte_range+0x172/0x236
 [<c0143bf8>] unmap_page_range+0xa9/0xf8
 [<c0143d48>] unmap_vmas+0x101/0x1e2
 [<c0147606>] unmap_region+0x92/0xf8
 [<c0147877>] do_munmap+0xd9/0xef
 [<c01478dd>] sys_munmap+0x50/0x68
 [<c0102717>] sysenter_past_esp+0x54/0x75
note: X[1682] exited with preempt_count 1
scheduling while atomic: X/0x00000001/1682
 [<c02f512f>] schedule+0x43/0x601
 [<c0102717>] sysenter_past_esp+0x54/0x75
 [<c0102717>] sysenter_past_esp+0x54/0x75
 [<c011af90>] printk+0xe/0x11
 [<c02f6207>] rwsem_down_read_failed+0x143/0x162
 [<c011dfca>] .text.lock.exit+0x27/0x85
 [<c011d095>] do_exit+0x178/0x34a
 [<c0103862>] do_divide_error+0x0/0x88
 [<c01039b0>] do_invalid_op+0x0/0x8b
 [<c0103a2f>] do_invalid_op+0x7f/0x8b
 [<c013fbce>] put_page+0x4a/0x66
 [<c01ba078>] avc_has_perm_noaudit+0x37/0xe3
 [<e1c93717>] drm_free+0xb7/0x150 [fglrx]
 [<e1c93717>] drm_free+0xb7/0x150 [fglrx]
 [<c0103273>] error_code+0x4f/0x54
 [<e1c9007b>] FGLDRM__vm_info+0xa0/0x16b [fglrx]
 [<e1c9007b>] FGLDRM__vm_info+0xa0/0x16b [fglrx]
 [<c013fbce>] put_page+0x4a/0x66
 [<c0143a8b>] zap_pte_range+0x172/0x236
 [<c0143bf8>] unmap_page_range+0xa9/0xf8
 [<c0143d48>] unmap_vmas+0x101/0x1e2
 [<c0147606>] unmap_region+0x92/0xf8
 [<c0147877>] do_munmap+0xd9/0xef
 [<c01478dd>] sys_munmap+0x50/0x68
 [<c0102717>] sysenter_past_esp+0x54/0x75
usb 1-2: USB disconnect, address 4

- ---------------------------------
- -------------sh scripts/ver_linux output
Linux laptop 2.6.15.2_DL6 #1 SMP Wed Feb 1 10:40:33 CET 2006 i686 i686
i386 GNU/Linux

Gnu C                  3.4.3
Gnu make               3.80
binutils               2.15.91.0.2
util-linux             2.12a
mount                  2.12a
module-init-tools      3.0
e2fsprogs              1.38
reiserfsprogs          line
reiser4progs           line
Linux C Library        2.3.4
Dynamic linker (ldd)   2.3.4
Linux C++ Library      6.0.2
Procps                 3.2.3
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.2.1
udev                   075
Modules Loaded         nls_utf8 ntfs snd_rtctimer ipv6 fglrx ata_piix
libata radeonfb scsi_mod i2c_algo_bit ipw2100 ieee80211 ehci_hcd
ieee80211_crypt 8139cp i8xx_tco joydev snd_pcm_oss snd_mixer_oss
snd_seq_oss snd_seq_midi_event snd_seq_dummy snd_seq snd_seq_device
snd_intel8x0 snd_intel8x0m snd_ac97_codec snd_ac97_bus snd_pcm snd_timer
snd soundcore snd_page_alloc i2c_i801 i2c_core shpchp yenta_socket
rsrc_nonstatic ohci1394 ieee1394 video dm_mod iptable_filter
ipt_multiport ipt_state ip_conntrack nfnetlink ipt_LOG ip_tables sunrpc
pcmcia pcmcia_core autofs4 lp parport_pc parport 8139too mii
- -----------------------------------


Well sure I can down grade the kernel, but may be this is of interest to
you.


Kind Regards,

Badri
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFD40ZigNsg6g2ylScRAvnxAJ0SW6BDaieFlA2q1ZM3JiLyElovHQCeNwzj
MRweF3GbgoBZBJUo6+3dAFw=
=K+6L
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: PROBLEM
  2004-12-24  4:22 PROBLEM Scott Mollica
@ 2004-12-27  3:28 ` Adrian Bunk
  0 siblings, 0 replies; 19+ messages in thread
From: Adrian Bunk @ 2004-12-27  3:28 UTC (permalink / raw)
  To: Scott Mollica; +Cc: linux-kernel

On Thu, Dec 23, 2004 at 08:22:34PM -0800, Scott Mollica wrote:

> [1.] One line summary of the problem: 
> Problem 
> make utility exits with an Error 2 when making
> linux-2.6.9-final.  
>  
> [2.] Full description of the problem/report:
> make seems to choke in the
> "drivers/char/drm/gamma_drv.c" section during make
> (output from make is attached at bottom).
>...
>   CC [M]  drivers/char/drm/gamma_drv.o
> In file included from drivers/char/drm/gamma_drv.c:42:
> drivers/char/drm/gamma_context.h: In function
> `gamma_context_switch_complete':
> drivers/char/drm/gamma_context.h:193: error: structure
> has no member named `next_buffer'
>...
> make[3]: *** [drivers/char/drm/gamma_drv.o] Error 1
>...

It seems you answered "yes" to

  Code maturity level options
    Prompt for development and/or incomplete code/drivers

and "no" to

  Code maturity level options
    Prompt for development and/or incomplete code/drivers
      Select only drivers expected to compile cleanly

If you say "yes" to second question, you won't be able to select drivers 
that don't compile.

> Regards,
> Scott Mollica

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2004-12-24  4:22 Scott Mollica
  2004-12-27  3:28 ` PROBLEM Adrian Bunk
  0 siblings, 1 reply; 19+ messages in thread
From: Scott Mollica @ 2004-12-24  4:22 UTC (permalink / raw)
  To: linux-kernel

[1.] One line summary of the problem: 
Problem 
make utility exits with an Error 2 when making
linux-2.6.9-final.  
 
[2.] Full description of the problem/report:
make seems to choke in the
"drivers/char/drm/gamma_drv.c" section during make
(output from make is attached at bottom).

[3.] Keywords (i.e., modules, networking, kernel):
modules, gamma driver

[4.] Kernel version (from /proc/version):
smollica@t42:/proc$ more /proc/version
Linux version 2.6.8-1-386 (joshk@trollwife) (gcc
version 3.3.5 (Debian 1:3.3.5-2)) #1 Thu Nov 25
04:24:08 UTC 2004

[5.] Output of Oops.. message (if applicable) with
symbolic information 
     resolved (see Documentation/oops-tracing.txt)

[6.] A small shell script or example program which
triggers the
     problem (if possible)
Running make from the /usr/src/linux-2.6.9-final
directory.  

[7.] Environment
Please note that I'm running make as su (maybe not a
good idea) and I'm not using a link to the kernel
source as /usr/src/linux.

[7.1.] Software (add the output of the ver_linux
script here)

t42:/usr/src/kernel-source-2.6.8/scripts# sh ver_linux
If some fields are empty or look unusual you may have
an old version.
Compare to the current minimal requirements in
Documentation/Changes.

Linux t42 2.6.8-1-386 #1 Thu Nov 25 04:24:08 UTC 2004
i686 GNU/Linux

Gnu C                  3.3.4
Gnu make               3.80
binutils               2.15
util-linux             2.12
mount                  2.12
module-init-tools      3.1
e2fsprogs              1.35
pcmcia-cs              3.2.5
PPP                    2.4.2
nfs-utils              1.0.6
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.2.1
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.2.1
Modules Loaded         ipv6 ds af_packet yenta_socket
pcmcia_core snd_intel8x0m snd_intel8x0 snd_ac97_codec
snd_pcm snd_timer snd_page_alloc gameport
snd_mpu401_uart snd_rawmidi snd_seq_device snd shpchp
pciehp pci_hotplug intel_agp agpgart parport_pc
parport floppy irtty_sir sir_dev irda crc_ccitt tsdev
mousedev joydev psmouse pcspkr rtc evdev sd_mod
usb_storage scsi_mod ehci_hcd uhci_hcd usbcore
i810_audio ac97_codec soundcore e1000 capability
commoncap ide_cd cdrom isofs ext3 jbd ide_generic piix
ide_disk ide_core unix font vesafb cfbcopyarea
cfbimgblt cfbfillrect

[7.2.] Processor information (from /proc/cpuinfo):
t42:/usr/src# more /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 13
model name      : Intel(R) Pentium(R) M processor
1.70GHz
stepping        : 6
cpu MHz         : 1694.773
cache size      : 2048 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 apic
sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr
sse sse2 ss tm pbe tm2 est
bogomips        : 3358.72

[7.3.] Module information (from /proc/modules):
t42:/usr/src# more /proc/modules
ipv6 229764 8 - Live 0xf8c23000
ds 17796 4 - Live 0xf8bdb000
af_packet 20872 2 - Live 0xf8b9d000
yenta_socket 19200 0 - Live 0xf8b90000
pcmcia_core 63028 2 ds,yenta_socket, Live 0xf8bca000
snd_intel8x0m 18632 0 - Live 0xf8b8a000
snd_intel8x0 33068 0 - Live 0xf8b72000
snd_ac97_codec 59268 2 snd_intel8x0m,snd_intel8x0,
Live 0xf8bba000
snd_pcm 85384 2 snd_intel8x0m,snd_intel8x0, Live
0xf8ba4000
snd_timer 23172 1 snd_pcm, Live 0xf8b6b000
snd_page_alloc 11144 3
snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8a4d000
gameport 4736 1 snd_intel8x0, Live 0xf8a81000
snd_mpu401_uart 7296 1 snd_intel8x0, Live 0xf8a77000
snd_rawmidi 23204 1 snd_mpu401_uart, Live 0xf8b25000
snd_seq_device 7944 1 snd_rawmidi, Live 0xf8a69000
snd 50660 8
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device,
Live 0xf8b7c000
shpchp 87148 0 - Live 0xf8b39000
pciehp 83948 0 - Live 0xf8b55000
pci_hotplug 30640 2 shpchp,pciehp, Live 0xf8b30000
intel_agp 20512 1 - Live 0xf8a7a000
agpgart 31784 1 intel_agp, Live 0xf8adb000
parport_pc 33348 0 - Live 0xf8ad1000
parport 37320 1 parport_pc, Live 0xf8ac6000
floppy 54992 0 - Live 0xf8a85000
irtty_sir 8320 0 - Live 0xf8a65000
sir_dev 18092 1 irtty_sir, Live 0xf8a6c000
irda 167360 2 irtty_sir,sir_dev, Live 0xf8a9c000
crc_ccitt 2432 1 irda, Live 0xf89d0000
tsdev 7168 0 - Live 0xf8a51000
mousedev 9996 2 - Live 0xf8a45000
joydev 9536 0 - Live 0xf8a49000
psmouse 17800 0 - Live 0xf88b4000
pcspkr 3816 0 - Live 0xf889f000
rtc 12088 0 - Live 0xf8a41000
evdev 9088 0 - Live 0xf89cc000
sd_mod 20480 0 - Live 0xf88ba000
usb_storage 59456 0 - Live 0xf8a55000
scsi_mod 115148 2 sd_mod,usb_storage, Live 0xf8a07000
ehci_hcd 27908 0 - Live 0xf89c4000
uhci_hcd 29328 0 - Live 0xf89bb000
usbcore 104164 5 usb_storage,ehci_hcd,uhci_hcd, Live
0xf8a26000
i810_audio 33300 1 - Live 0xf88cb000
ac97_codec 16908 1 i810_audio, Live 0xf8887000
soundcore 9824 3 snd,i810_audio, Live 0xf8834000
e1000 75268 0 - Live 0xf89d2000
capability 4872 0 - Live 0xf8852000
commoncap 7168 1 capability, Live 0xf8838000
ide_cd 38176 0 - Live 0xf88c0000
cdrom 35740 1 ide_cd, Live 0xf88a6000
isofs 33976 0 - Live 0xf8893000
ext3 109672 1 - Live 0xf88d5000
jbd 54552 1 ext3, Live 0xf8857000
ide_generic 1664 0 - Live 0xf88b2000
piix 12448 1 - Live 0xf88a1000
ide_disk 16768 3 - Live 0xf888d000
ide_core 125028 5
usb_storage,ide_cd,ide_generic,piix,ide_disk, Live
0xf8867000
unix 25908 438 - Live 0xf883d000
font 8576 0 - Live 0xf8830000
vesafb 6688 0 - Live 0xf8823000
cfbcopyarea 3840 1 vesafb, Live 0xf882a000
cfbimgblt 3200 1 vesafb, Live 0xf8828000
cfbfillrect 3712 1 vesafb, Live 0xf8826000

[7.4.] Loaded driver and hardware information
(/proc/ioports, /proc/iomem)
smollica@t42:/proc$ more /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
04d0-04d1 : pnp 00:0b
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
  1000-105f : pnp 00:0b
  1060-107f : pnp 00:0b
1180-11bf : 0000:00:1f.0
  1180-11bf : pnp 00:0b
1800-181f : 0000:00:1d.0
  1800-181f : uhci_hcd
1820-183f : 0000:00:1d.1
  1820-183f : uhci_hcd
1840-185f : 0000:00:1d.2
  1840-185f : uhci_hcd
1860-186f : 0000:00:1f.1
  1860-1867 : ide0
  1868-186f : ide1
1880-189f : 0000:00:1f.3
18c0-18ff : 0000:00:1f.5
  18c0-18ff : Intel ICH4
1c00-1cff : 0000:00:1f.5
  1c00-1cff : Intel ICH4
2000-207f : 0000:00:1f.6
  2000-207f : Intel 82801DB-ICH4 Modem - Controller
2400-24ff : 0000:00:1f.6
  2400-24ff : Intel 82801DB-ICH4 Modem - AC'97
3000-3fff : PCI Bus #01
  3000-30ff : 0000:01:00.0
4000-40ff : PCI CardBus #03
4400-44ff : PCI CardBus #03
4800-48ff : PCI CardBus #07
4c00-4cff : PCI CardBus #07
8000-803f : 0000:02:01.0
  8000-803f : e1000
------------------------------------------------
t42:/usr/src#    more /proc/iomem
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000d0000-000d0fff : Adapter ROM
000d1000-000d1fff : Adapter ROM
000d2000-000d3fff : reserved
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ff5ffff : System RAM
  00100000-0024d12a : Kernel code
  0024d12b-0030357f : Kernel data
3ff60000-3ff76fff : ACPI Tables
3ff77000-3ff78fff : ACPI Non-volatile Storage
3ff79000-3ff793ff : 0000:00:1f.1
3ff80000-3fffffff : reserved
40000000-403fffff : PCI CardBus #03
40400000-407fffff : PCI CardBus #03
40800000-40bfffff : PCI CardBus #07
40c00000-40ffffff : PCI CardBus #07
b0000000-b0000fff : 0000:02:00.0
  b0000000-b0000fff : yenta_socket
b1000000-b1000fff : 0000:02:00.1
  b1000000-b1000fff : yenta_socket
c0000000-c00003ff : 0000:00:1d.7
  c0000000-c00003ff : ehci_hcd
c0000800-c00008ff : 0000:00:1f.5
  c0000800-c00008ff : ich_audio MBBAR
c0000c00-c0000dff : 0000:00:1f.5
  c0000c00-c0000dff : ich_audio MMBAR
c0100000-c01fffff : PCI Bus #01
  c0100000-c010ffff : 0000:01:00.0
c0200000-c020ffff : 0000:02:01.0
  c0200000-c020ffff : e1000
c0210000-c0210fff : 0000:02:02.0
c0220000-c023ffff : 0000:02:01.0
  c0220000-c023ffff : e1000
d0000000-dfffffff : 0000:00:00.0
e0000000-e7ffffff : PCI Bus #01
  e0000000-e7ffffff : 0000:01:00.0
ff800000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)
smollica@t42:/proc$   lspci -vvv
0000:00:00.0 Host bridge: Intel Corp. 82855PM
Processor to I/O Controller (rev 03)
        Subsystem: IBM: Unknown device 0529
        Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at d0000000 (32-bit,
prefetchable) [size=256M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor
to AGP Controller (rev 03) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 96
        Bus: primary=00, secondary=01, subordinate=01,
sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge:
e0000000-e7ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort-
>Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp.
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #1 (rev 01) (prog-if 00 [UHCI])
        Subsystem: IBM: Unknown device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corp.
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #2 (rev 01) (prog-if 00 [UHCI])
        Subsystem: IBM: Unknown device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corp.
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #3 (rev 01) (prog-if 00 [UHCI])
        Subsystem: IBM: Unknown device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at 1840 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM
(ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
(prog-if 20 [EHCI])
        Subsystem: IBM: Unknown device 052e
        Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at c0000000 (32-bit,
non-prefetchable) [size=1K]
        Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge
(rev 81) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=08,
sec-latency=64
        I/O behind bridge: 00004000-00008fff
        Memory behind bridge: c0200000-cfffffff
        Prefetchable memory behind bridge:
e8000000-efffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort-
>Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC
Interface Controller (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801DBM
(ICH4) Ultra ATA Storage Controller (rev 01) (prog-if
8a [Master SecP PriP])
        Subsystem: IBM: Unknown device 052d
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at 1860 [size=16]
        Region 5: Memory at 3ff79000 (32-bit,
non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
        Subsystem: IBM: Unknown device 052d
        Control: I/O+ Mem- BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1880 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp.
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio
Controller (rev 01)
        Subsystem: IBM: Unknown device 0554
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 18c0 [size=64]
        Region 2: Memory at c0000c00 (32-bit,
non-prefetchable) [size=512]
        Region 3: Memory at c0000800 (32-bit,
non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
(prog-if 00 [Generic])
        Subsystem: IBM: Unknown device 0559
        Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: ATI
Technologies Inc RV350 [Mobility Radeon 9600 M10]
(prog-if 00 [VGA])
        Subsystem: IBM: Unknown device 0550
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min), Cache Line Size:
0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit,
prefetchable) [size=128M]
        Region 1: I/O ports at 3000 [size=256]
        Region 2: Memory at c0100000 (32-bit,
non-prefetchable) [size=64K]
        Capabilities: <available only to root>

0000:02:00.0 CardBus bridge: Texas Instruments PCI4520
PC card Cardbus Controller (rev 01)
        Subsystem: IBM: Unknown device 0552
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 0x20 (128
bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at b0000000 (32-bit,
non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06,
sec-latency=176
        Memory window 0: 40000000-403ff000
(prefetchable)
        Memory window 1: 40400000-407ff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort-
>Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

0000:02:00.1 CardBus bridge: Texas Instruments PCI4520
PC card Cardbus Controller (rev 01)
        Subsystem: IBM: Unknown device 0552
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size: 0x20 (128
bytes)
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at b1000000 (32-bit,
non-prefetchable) [size=4K]
        Bus: primary=02, secondary=07, subordinate=0a,
sec-latency=176
        Memory window 0: 40800000-40bff000
(prefetchable)
        Memory window 1: 40c00000-40fff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort-
>Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

0000:02:01.0 Ethernet controller: Intel Corp. 82540EP
Gigabit Ethernet Controller (Mobile) (rev 03)
        Subsystem: IBM PRO/1000 MT Mobile Connection
        Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min), Cache Line Size:
0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0220000 (32-bit,
non-prefetchable) [size=128K]
        Region 1: Memory at c0200000 (32-bit,
non-prefetchable) [size=64K]
        Region 2: I/O ports at 8000 [size=64]
        Capabilities: <available only to root>

0000:02:02.0 Network controller: Intel Corp.
PRO/Wireless 2200BG (rev 05)
        Subsystem: Intel Corp.: Unknown device 2711
        Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 6000ns max), Cache
Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0210000 (32-bit,
non-prefetchable) [size=4K]
        Capabilities: <available only to root>

[7.6.] SCSI information (from /proc/scsi/scsi)
smollica@t42:/proc$ more /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SanDisk  Model: Cruzer Mini      Rev: 0.1
  Type:   Direct-Access                    ANSI SCSI
revision: 02

[7.7.] Other information that might be relevant to the
problem
       (please look in /proc and include all
information that you
       think to be relevant):
Machine - IBM Thinkpad T42.
OS - customized debian 2.6.8 testing kernel.  The mods
I made were enabling HIMEM for 4 GB (although I run
with 1GB), .config support and selection of Pentium M
processor.
[X.] Other notes, patches, fixes, workarounds:

----------------make output------------------

CC [M]  drivers/char/agp/backend.o
  CC [M]  drivers/char/agp/frontend.o
  CC [M]  drivers/char/agp/generic.o
  CC [M]  drivers/char/agp/isoch.o
  LD [M]  drivers/char/agp/agpgart.o
  CC [M]  drivers/char/agp/ali-agp.o
  CC [M]  drivers/char/agp/ati-agp.o
  CC [M]  drivers/char/agp/amd-k7-agp.o
  CC [M]  drivers/char/agp/amd64-agp.o
  CC [M]  drivers/char/agp/efficeon-agp.o
  CC [M]  drivers/char/agp/intel-mch-agp.o
  CC [M]  drivers/char/agp/intel-agp.o
  CC [M]  drivers/char/agp/nvidia-agp.o
  CC [M]  drivers/char/agp/sis-agp.o
  CC [M]  drivers/char/agp/sworks-agp.o
  CC [M]  drivers/char/agp/via-agp.o
  LD      drivers/char/drm/built-in.o
  CC [M]  drivers/char/drm/gamma_drv.o
In file included from drivers/char/drm/gamma_drv.c:42:
drivers/char/drm/gamma_context.h: In function
`gamma_context_switch_complete':
drivers/char/drm/gamma_context.h:193: error: structure
has no member named `next_buffer'
drivers/char/drm/gamma_context.h:193: error: structure
has no member named `next_buffer'
In file included from drivers/char/drm/gamma_drv.c:44:
drivers/char/drm/gamma_old_dma.h: In function
`gamma_clear_next_buffer':
drivers/char/drm/gamma_old_dma.h:40: error: structure
has no member named `next_buffer'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:41: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:42: error: structure
has no member named `next_queue'
drivers/char/drm/gamma_old_dma.h:44: error: structure
has no member named `next_queue'
In file included from drivers/char/drm/gamma_drv.c:46:
drivers/char/drm/drm_drv.h: In function
`gamma_release':
drivers/char/drm/drm_drv.h:808: warning: implicit
declaration of function `gamma_ctxbitmap_free'
make[3]: *** [drivers/char/drm/gamma_drv.o] Error 1
make[2]: *** [drivers/char/drm] Error 2
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2

Regards,
Scott Mollica


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: PROBLEM
  2003-12-19 18:25 ` PROBLEM Jean-Philippe Woot de Trixhe
@ 2003-12-19 19:29   ` Jose Luis Domingo Lopez
  0 siblings, 0 replies; 19+ messages in thread
From: Jose Luis Domingo Lopez @ 2003-12-19 19:29 UTC (permalink / raw)
  To: linux Kernel

On Friday, 19 December 2003, at 19:25:27 +0100,
Jean-Philippe Woot de Trixhe wrote:

> Federico Freire wrote:
> [ as much as 443 (repeat, 443) lines of unnecessary quotation removed ]
> Did you try to mount /dev/cdrom or /dev/hdc ? because your CD-R/RW drive 
> is set as hdc...
> 
Was it _really_ necessary to waste several thousand times 18 KiB in
ASCII text quoted from the original message just to add two new lines of
text ?. Please, trim replies to the absolutely necessary length.

PS: 4000 subscribers times 18 KiB gives more than 70 MiB

Greetings.

-- 
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.6.0)

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: PROBLEM
  2003-12-19 18:10 PROBLEM Federico Freire
@ 2003-12-19 18:25 ` Jean-Philippe Woot de Trixhe
  2003-12-19 19:29   ` PROBLEM Jose Luis Domingo Lopez
  0 siblings, 1 reply; 19+ messages in thread
From: Jean-Philippe Woot de Trixhe @ 2003-12-19 18:25 UTC (permalink / raw)
  To: Federico Freire, linux Kernel

Federico Freire wrote:

>This is my first bug reporting so sorry if I give you the wrong information... 
>and sorry for my english.
>
>I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10 
>minutes after I boot... I can't mount it, or record, etc. When I do dmesg I 
>get this over and over again:
>
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>
>I googled but I didn't find anything about this...
>
>This is the output of ver_linux:
>--------------------------------------------
>If some fields are empty or look unusual you may have an old version.
>Compare to the current minimal requirements in Documentation/Changes.
>
>Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD 
>Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux
>
>Gnu C                  3.2.3
>Gnu make               3.80
>util-linux             2.11z
>mount                  2.11z
>module-init-tools      0.9.12
>e2fsprogs              1.33
>PPP                    2.4.1
>Linux C Library        2.3.2
>Dynamic linker (ldd)   2.3.2
>Procps                 3.1.12
>Net-tools              1.60
>Kbd                    1.06
>Sh-utils               5.0
>Modules Loaded         snd_seq_midi snd_emu10k1_synth snd_emux_synth 
>snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec 
>snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device 
>snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc 
>nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core 
>quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom
>-------------------------------
>
>I've been using kernel-2.6 since test10 and the bug is there since I tried 
>it...
>I've dma enabled but when I disabled it I get the same error..
>
>
>This is my dmesg:
>------------------------------------
>
>Calibrating delay loop... 3858.43 BogoMIPS
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>checking if image is initramfs...it isn't (ungzip failed); looks like an 
>initrd
>Freeing initrd memory: 40k freed
>CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>CPU0: AMD Athlon(tm) XP 2400+ stepping 01
>per-CPU timeslice cutoff: 731.41 usecs.
>task migration cache decay timeout: 1 msecs.
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000080
>ESR value after enabling vector: 00000000
>Total of 1 processors activated (3858.43 BogoMIPS).
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not 
>connected.
>..TIMER: vector=0x31 pin1=2 pin2=-1
>number of MP IRQ sources: 15.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>IO APIC #2......
>.... register #00: 02000000
>.......    : physical APIC id: 02
>.......    : Delivery Type: 0
>.......    : LTS          : 0
>.... register #01: 00178003
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 1
>.......     : IO APIC version: 0003
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00  1    0    0   0   0    0    0    00
> 01 001 01  0    0    0   0   0    1    1    39
> 02 001 01  0    0    0   0   0    1    1    31
> 03 001 01  0    0    0   0   0    1    1    41
> 04 001 01  0    0    0   0   0    1    1    49
> 05 001 01  0    0    0   0   0    1    1    51
> 06 001 01  0    0    0   0   0    1    1    59
> 07 001 01  0    0    0   0   0    1    1    61
> 08 001 01  0    0    0   0   0    1    1    69
> 09 001 01  1    1    0   1   0    1    1    71
> 0a 001 01  0    0    0   0   0    1    1    79
> 0b 001 01  0    0    0   0   0    1    1    81
> 0c 001 01  0    0    0   0   0    1    1    89
> 0d 001 01  0    0    0   0   0    1    1    91
> 0e 001 01  0    0    0   0   0    1    1    99
> 0f 001 01  0    0    0   0   0    1    1    A1
> 10 000 00  1    0    0   0   0    0    0    00
> 11 000 00  1    0    0   0   0    0    0    00
> 12 000 00  1    0    0   0   0    0    0    00
> 13 000 00  1    0    0   0   0    0    0    00
> 14 000 00  1    0    0   0   0    0    0    00
> 15 000 00  1    0    0   0   0    0    0    00
> 16 000 00  1    0    0   0   0    0    0    00
> 17 000 00  1    0    0   0   0    0    0    00
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 1960.0714 MHz.
>..... host bus clock speed is 340.0993 MHz.
>Starting migration thread for cpu 0
>CPUS done 8
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20031002
>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
>00:00:01[A] -> 2-16 -> IRQ 16
>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
>00:00:01[B] -> 2-17 -> IRQ 17
>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1)
>00:00:11[C] -> 2-22 -> IRQ 22
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
>00:00:05[C] -> 2-18 -> IRQ 18
>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
>00:00:05[D] -> 2-19 -> IRQ 19
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
>00:00:10[A] -> 2-21 -> IRQ 21
>Pin 2-21 already programmed
>Pin 2-21 already programmed
>Pin 2-21 already programmed
>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1)
>00:00:12[A] -> 2-23 -> IRQ 23
>Pin 2-18 already programmed
>ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 
>'acpi=off'
>vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=0
>vesafb: protected mode interface info at c000:0f3e
>vesafb: scrolling: redraw
>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
>fb0: VESA VGA frame buffer device
>Machine check exception polling timer started.
>devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
>devfs: boot_options: 0x1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>udf: registering filesystem
>PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
>PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Processor [CPU1] (supports C1, 16 throttling states)
>bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768 
>bytes, found (1024x768, 20089 bytes, v3).
>Console: switching to colour frame buffer device 122x40
>pty: 256 Unix98 ptys configured
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>agpgart: Maximum main memory to use for agp memory: 203M
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Using anticipatory io scheduler
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>loop: loaded (max 8 devices)
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>hda: Maxtor 6E040L0, ATA DISK drive
>hdb: SAMSUNG SV2044D, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
>hdb: max request size: 128KiB
>hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66)
> /dev/ide/host0/bus0/target1/lun0: p1
>Console: switching to colour frame buffer device 122x40
>mice: PS/2 mouse device common for all mice
>serio: i8042 AUX port at 0x60,0x64 irq 12
>input: AT Translated Set 2 keyboard on isa0060/serio0
>serio: i8042 KBD port at 0x60,0x64 irq 1
>NET: Registered protocol family 2
>IP: routing cache hash table of 2048 buckets, 16Kbytes
>TCP: Hash tables configured (established 16384 bind 16384)
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>RAMDISK: Couldn't find valid RAM disk image starting at 0.
>found reiserfs format "3.6" with standard journal
>Reiserfs journal params: device hda3, size 8192, journal first block 18, max 
>trans len 1024, max batch 900, max commit age 30, max trans age 30
>reiserfs: checking transaction log (hda3) for (hda3)
>Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly.
>Mounted devfs on /dev
>Freeing unused kernel memory: 168k freed
>Adding 248996k swap on /dev/hda2.  Priority:-1 extents:1
>hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.12
>8139too Fast Ethernet driver 0.9.26
>eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>nvidia: no version magic, tainting kernel.
>nvidia: module license 'NVIDIA' taints kernel.
>0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 
>16 19:03:09 PDT 2003
>drivers/usb/core/usb.c: registered new driver usbfs
>drivers/usb/core/usb.c: registered new driver hub
>drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver 
>v2.1
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: irq 21, io base 0000e400
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>drivers/usb/core/usb.c: registered new driver hid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>Linux video capture interface: v1.00
>quickcam: no version magic, tainting kernel.
>quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------
>quickcam [49.207228]: struct quickcam size: 5548
>drivers/usb/core/usb.c: registered new driver quickcam
>i2c /dev entries driver
>registering 0-0290
>NTFS driver 2.1.5 [Flags: R/O MODULE].
>NTFS volume version 3.0.
>hub 1-0:1.0: new USB device on port 1, assigned address 2
>quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 
>2003/10/30 11:16:49 $)
>Module quickcam cannot be unloaded due to unsafe usage in 
>include/linux/module.h:483
>quickcam: Sensor HDCS-1000/1100 detected
>videodev: "QuickCam USB" has no release callback. Please fix your driver for 
>proper sysfs support, see http://lwn.net/Articles/36850/
>hub 1-0:1.0: new USB device on port 2, assigned address 3
>input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2
>Real Time Clock Driver v1.12
>blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff)
>blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff)
>eth0: link up, 10Mbps, half-duplex, lpa 0x0000
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 0 changed to on
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 1 changed to on
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 2 changed to on
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 3 changed to on
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 4 changed to on
>bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
>bytes, v3).
>bootsplash: status on console 5 changed to on
>Debug: sleeping function called from invalid context at mm/slab.c:1856
>in_atomic():1, irqs_disabled():0
>Call Trace:
> [<c0122a2b>] __might_sleep+0xab/0xd0
> [<c0149340>] kmem_cache_alloc+0x70/0x80
> [<c0159661>] __get_vm_area+0x21/0x150
> [<c01597c3>] get_vm_area+0x33/0x40
> [<c011e6a3>] __ioremap+0xb3/0x100
> [<c0145492>] buffered_rmqueue+0xe2/0x190
> [<c011e719>] ioremap_nocache+0x29/0xb0
> [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
> [<c01595db>] map_vm_area+0x6b/0xd0
> [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
> [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
> [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
> [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
> [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
> [<c016943c>] chrdev_open+0x12c/0x2c0
> [<c01cb34e>] devfs_open+0x11e/0x140
> [<c015e7ca>] dentry_open+0x15a/0x240
> [<c015e666>] filp_open+0x66/0x70
> [<c015ebb3>] sys_open+0x53/0x90
> [<c010b69b>] syscall_call+0x7/0xb
>
>Debug: sleeping function called from invalid context at mm/slab.c:1856
>in_atomic():1, irqs_disabled():0
>Call Trace:
> [<c0122a2b>] __might_sleep+0xab/0xd0
> [<c028baef>] generic_unplug_device+0x8f/0xa0
> [<c0149340>] kmem_cache_alloc+0x70/0x80
> [<c0159661>] __get_vm_area+0x21/0x150
> [<c01597c3>] get_vm_area+0x33/0x40
> [<c011e6a3>] __ioremap+0xb3/0x100
> [<c0145492>] buffered_rmqueue+0xe2/0x190
> [<c011e719>] ioremap_nocache+0x29/0xb0
> [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
> [<c01595db>] map_vm_area+0x6b/0xd0
> [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
> [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
> [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
> [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
> [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
> [<c016943c>] chrdev_open+0x12c/0x2c0
> [<c01cb34e>] devfs_open+0x11e/0x140
> [<c015e7ca>] dentry_open+0x15a/0x240
> [<c015e666>] filp_open+0x66/0x70
> [<c015ebb3>] sys_open+0x53/0x90
> [<c010b69b>] syscall_call+0x7/0xb
>
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hdc: lost interrupt
>hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hdc: lost interrupt
>
>----------------------
>I hope that help...
>
>
>
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
>
>  
>
Did you try to mount /dev/cdrom or /dev/hdc ? because your CD-R/RW drive 
is set as hdc...

>>> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
>


^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2003-12-19 18:10 Federico Freire
  2003-12-19 18:25 ` PROBLEM Jean-Philippe Woot de Trixhe
  0 siblings, 1 reply; 19+ messages in thread
From: Federico Freire @ 2003-12-19 18:10 UTC (permalink / raw)
  To: linux-kernel

This is my first bug reporting so sorry if I give you the wrong information... 
and sorry for my english.

I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10 
minutes after I boot... I can't mount it, or record, etc. When I do dmesg I 
get this over and over again:

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

I googled but I didn't find anything about this...

This is the output of ver_linux:
--------------------------------------------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD 
Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux

Gnu C                  3.2.3
Gnu make               3.80
util-linux             2.11z
mount                  2.11z
module-init-tools      0.9.12
e2fsprogs              1.33
PPP                    2.4.1
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.12
Net-tools              1.60
Kbd                    1.06
Sh-utils               5.0
Modules Loaded         snd_seq_midi snd_emu10k1_synth snd_emux_synth 
snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec 
snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device 
snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc 
nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core 
quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom
-------------------------------

I've been using kernel-2.6 since test10 and the bug is there since I tried 
it...
I've dma enabled but when I disabled it I get the same error..


This is my dmesg:
------------------------------------

Calibrating delay loop... 3858.43 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an 
initrd
Freeing initrd memory: 40k freed
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 2400+ stepping 01
per-CPU timeslice cutoff: 731.41 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Total of 1 processors activated (3858.43 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not 
connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  1    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1960.0714 MHz.
..... host bus clock speed is 340.0993 MHz.
Starting migration thread for cpu 0
CPUS done 8
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1)
00:00:11[C] -> 2-22 -> IRQ 22
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:05[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:05[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1)
00:00:12[A] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768 
bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E040L0, ATA DISK drive
hdb: SAMSUNG SV2044D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66)
 /dev/ide/host0/bus0/target1/lun0: p1
Console: switching to colour frame buffer device 122x40
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max 
trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 248996k swap on /dev/hda2.  Priority:-1 extents:1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 
16 19:03:09 PDT 2003
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver 
v2.1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 21, io base 0000e400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Linux video capture interface: v1.00
quickcam: no version magic, tainting kernel.
quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------
quickcam [49.207228]: struct quickcam size: 5548
drivers/usb/core/usb.c: registered new driver quickcam
i2c /dev entries driver
registering 0-0290
NTFS driver 2.1.5 [Flags: R/O MODULE].
NTFS volume version 3.0.
hub 1-0:1.0: new USB device on port 1, assigned address 2
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 
2003/10/30 11:16:49 $)
Module quickcam cannot be unloaded due to unsafe usage in 
include/linux/module.h:483
quickcam: Sensor HDCS-1000/1100 detected
videodev: "QuickCam USB" has no release callback. Please fix your driver for 
proper sysfs support, see http://lwn.net/Articles/36850/
hub 1-0:1.0: new USB device on port 2, assigned address 3
input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2
Real Time Clock Driver v1.12
blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff)
blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff)
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 
bytes, v3).
bootsplash: status on console 5 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c0122a2b>] __might_sleep+0xab/0xd0
 [<c0149340>] kmem_cache_alloc+0x70/0x80
 [<c0159661>] __get_vm_area+0x21/0x150
 [<c01597c3>] get_vm_area+0x33/0x40
 [<c011e6a3>] __ioremap+0xb3/0x100
 [<c0145492>] buffered_rmqueue+0xe2/0x190
 [<c011e719>] ioremap_nocache+0x29/0xb0
 [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<c01595db>] map_vm_area+0x6b/0xd0
 [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
 [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
 [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
 [<c016943c>] chrdev_open+0x12c/0x2c0
 [<c01cb34e>] devfs_open+0x11e/0x140
 [<c015e7ca>] dentry_open+0x15a/0x240
 [<c015e666>] filp_open+0x66/0x70
 [<c015ebb3>] sys_open+0x53/0x90
 [<c010b69b>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c0122a2b>] __might_sleep+0xab/0xd0
 [<c028baef>] generic_unplug_device+0x8f/0xa0
 [<c0149340>] kmem_cache_alloc+0x70/0x80
 [<c0159661>] __get_vm_area+0x21/0x150
 [<c01597c3>] get_vm_area+0x33/0x40
 [<c011e6a3>] __ioremap+0xb3/0x100
 [<c0145492>] buffered_rmqueue+0xe2/0x190
 [<c011e719>] ioremap_nocache+0x29/0xb0
 [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<c01595db>] map_vm_area+0x6b/0xd0
 [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
 [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
 [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
 [<c016943c>] chrdev_open+0x12c/0x2c0
 [<c01cb34e>] devfs_open+0x11e/0x140
 [<c015e7ca>] dentry_open+0x15a/0x240
 [<c015e666>] filp_open+0x66/0x70
 [<c015ebb3>] sys_open+0x53/0x90
 [<c010b69b>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt

----------------------
I hope that help...






^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2003-10-21 13:39 laurent.miaille
  0 siblings, 0 replies; 19+ messages in thread
From: laurent.miaille @ 2003-10-21 13:39 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 419 bytes --]


Hi, 

Here's a bug report we had yesterday:
The machine was completely stopped, keyboard and mouse 
were not active, we could ping the machine but no access to its files.
Only one solution: reboot the machine. We ' re looking for some 
information about this crash. Thanks a lot if you can help us.
I send you a .txt file with all the kernel information and the last 
lines in the log we had.
Thanks a lot.

Laurent. 

[-- Attachment #2: bug_report_21_10_03.txt --]
[-- Type: text/plain, Size: 12474 bytes --]

Last lines before crashing we had in the logs:

Oct 18 04:44:07 juliette kernel: kernel BUG at dcache.c:362!
Oct 18 04:44:07 juliette kernel: invalid operand: 0000
Oct 18 04:44:07 juliette kernel: ide-cd cdrom cmpci soundcore radeon agpgart nfsd parport_pc lp parport autofs 
Oct 18 04:44:07 juliette kernel: CPU:    0
Oct 18 04:44:07 juliette kernel: EIP:    0010:[<c01538d1>]    Not tainted
Oct 18 04:44:07 juliette kernel: EFLAGS: 00013202
Oct 18 04:44:07 juliette kernel: 
Oct 18 04:44:07 juliette kernel: EIP is at prune_dcache [kernel] 0x91 (2.4.18-14)
Oct 18 04:44:07 juliette kernel: eax: 00000020   ebx: ccae5db8   ecx: ccae5000   edx: ccae5e38
Oct 18 04:44:07 juliette kernel: esi: ccae5da0   edi: dc3ff3e0   ebp: 00007038   esp: dffddfac
Oct 18 04:44:07 juliette kernel: ds: 0018   es: 0018   ss: 0018
Oct 18 04:44:07 juliette kernel: Process kswapd (pid: 5, stackpage=dffdd000)
Oct 18 04:44:07 juliette kernel: Stack: df048360 ccae5d20 dffdc000 00000054 dffdc000 00000000 dffdc245 0008e000 
Oct 18 04:44:07 juliette kernel:        c0153d04 00009188 c0136c2e 00000006 000001f0 c23a0018 00010f00 c23a5fb8 
Oct 18 04:44:07 juliette kernel:        c0105000 c010744e 00000000 c0136b60 00000000 
Oct 18 04:44:07 juliette kernel: Call Trace: [<c0153d04>] shrink_dcache_memory [kernel] 0x24 (0xdffddfcc))
Oct 18 04:44:07 juliette kernel: [<c0136c2e>] kswapd [kernel] 0xce (0xdffddfd4))
Oct 18 04:44:07 juliette kernel: [<c0105000>] stext [kernel] 0x0 (0xdffddfec))
Oct 18 04:44:07 juliette kernel: [<c010744e>] kernel_thread [kernel] 0x2e (0xdffddff0))
Oct 18 04:44:07 juliette kernel: [<c0136b60>] kswapd [kernel] 0x0 (0xdffddff8))
Oct 18 04:44:07 juliette kernel: 
Oct 18 04:44:07 juliette kernel: 
Oct 18 04:44:07 juliette kernel: Code: 0f 0b 6a 01 82 aa 25 c0 8d 43 f8 8b 48 04 8b 53 f8 89 11 89 

Kernel Information:

Kernel Version: 

Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) 
(gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002



Processor information:

processor	: 0
vendor_id	: GenuineIntel

cpu family	: 15
model		: 2

model name	: Intel(R) Pentium(R) 4 CPU 1.80GHz
stepping	: 4

cpu MHz		: 1816.131
cache size	: 512 KB
fdiv_bug	: no

hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes

fpu_exception	: yes
cpuid level	: 2
wp		: yes

flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips	: 3609.95



Module information:

ide-cd                 33608   0 (autoclean)
cdrom                  33696   0 (autoclean) [ide-cd]

cmpci                  35944   0 (autoclean)
soundcore               6532   4 (autoclean) [cmpci]

radeon                 93976   1
agpgart                43072   3

nfsd                   79920   8 (autoclean)
parport_pc             19108   1 (autoclean)

lp                      8996   0 (autoclean)
parport                37152   1 (autoclean) [parport_pc lp]

autofs                 13348   0 (autoclean) (unused)
nfs                    82564   1 (autoclean)

lockd                  58064   1 (autoclean) [nfsd nfs]
sunrpc                 79324   1 (autoclean) [nfsd nfs lockd]

3c59x                  30640   1
iptable_filter          2412   0 (autoclean) (unused)

ip_tables              14936   1 [iptable_filter]
aic7xxx               137204   2 (autoclean)

sd_mod                 13584   4 (autoclean)
scsi_mod              107176   2 (autoclean) [aic7xxx sd_mod]

mousedev                5524   1
keybdev                 2976   0 (unused)

hid                    22244   0 (unused)
input                   5888   0 [mousedev keybdev hid]

usb-uhci               26188   0 (unused)
usbcore                77024   1 [hid usb-uhci]

ext3                   70368   9
jbd                    52212   9 [ext3]


Loaded driver and hardware information:

- ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc

0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1

01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1

0378-037a : parport0
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)

0cf8-0cff : PCI conf1
a000-a01f : Intel Corp. 82801BA/BAM USB (Hub #2)
  a000-a01f : usb-uhci

a400-a41f : Intel Corp. 82801BA/BAM USB (Hub #1)
  a400-a41f : usb-uhci

a800-a80f : Intel Corp. 82801BA IDE U100
  a800-a807 : ide0
  a808-a80f : ide1
b000-bfff : PCI Bus #02

b000-b07f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
    b000-b07f : 02:0c.0

b400-b4ff : Adaptec AHA-7850
  b800-b8ff : C-Media Electronics Inc CM8738

b800-b8ff : cmpci
d000-dfff : PCI Bus #01
  d800-d8ff : ATI Technologies Inc Radeon VE QY


- iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area

000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
  
00100000-0024b8dd : Kernel code
  0024b8de-003457a3 : Kernel data
1ffec000-1ffeefff : ACPI Tables

1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
ee000000-eeffffff : PCI Bus #02
  
ee000000-ee00007f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
  ee800000-ee800fff : Adaptec AHA-7850
    
ee800000-ee800fff : aic7xxx
ef000000-efdfffff : PCI Bus #01
  ef000000-ef00ffff : ATI Technologies Inc Radeon VE QY

efe00000-efefffff : PCI Bus #02
eff00000-f7ffffff : PCI Bus #01
  f0000000-f7ffffff : ATI Technologies Inc Radeon VE QY

f8000000-fbffffff : Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
fec00000-fec00fff : reserved

fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved



PCI information:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
	
Subsystem: Asustek Computer, Inc.: Unknown device 8070
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	
Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] #09 [9104]
	
Capabilities: [a0] AGP version 2.0
 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
		
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1



00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
	
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	
Memory behind bridge: ef000000-efdfffff
	Prefetchable memory behind bridge: eff00000-f7ffffff
	
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-



00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 05) (prog-if 00 [Normal decode])
	
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	
Memory behind bridge: ee000000-eeffffff
	Prefetchable memory behind bridge: efe00000-efefffff
	
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-



00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 0



00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) (prog-if 80 [Master])
	
Subsystem: Asustek Computer, Inc.: Unknown device 8028
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 0
	Region 0: [virtual] I/O ports at 01f0
	Region 1: [virtual] I/O ports at 03f4
	
Region 2: [virtual] I/O ports at 0170
	Region 3: [virtual] I/O ports at 0374
	
Region 4: I/O ports at a800 [size=16]



00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) (prog-if 00 [UHCI])
	
Subsystem: Asustek Computer, Inc.: Unknown device 8028
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 0
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at a400 [size=32]



00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) (prog-if 00 [UHCI])
	
Subsystem: Asustek Computer, Inc.: Unknown device 8028
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 0
	Interrupt: pin C routed to IRQ 9
	Region 4: I/O ports at a000 [size=32]



01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY (prog-if 00 [VGA])
	
Subsystem: Palit Microsystems Inc.: Unknown device 5159
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 64 (2000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 11
	
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at d800 [size=256]
	
Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at effe0000 [disabled] [size=128K]
	
Capabilities: [58] AGP version 2.0
		Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4
		
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
	Capabilities: [50] Power Management version 2
		
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		
Status: D0 PME-Enable- DSel=0 DScale=0 PME-



02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
	
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 32 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at b800 [size=256]
	
Capabilities: [c0] Power Management version 2
	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		
Status: D0 PME-Enable- DSel=0 DScale=0 PME-



02:09.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
	
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 32 (1000ns min, 1000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	
Region 0: I/O ports at b400 [disabled] [size=256]
	Region 1: Memory at ee800000 (32-bit, non-prefetchable) [size=4K]
	
Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		
Status: D0 PME-Enable- DSel=0 DScale=0 PME-



02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
	
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	
Latency: 32 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 5
	
Region 0: I/O ports at b000 [size=128]
	Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=128]
	
Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		
Status: D0 PME-Enable- DSel=0 DScale=2 PME-


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Problem
@ 2003-03-13 21:40 Smiler
  0 siblings, 0 replies; 19+ messages in thread
From: Smiler @ 2003-03-13 21:40 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1601 bytes --]

a speziall Kernelconfig im attachment

 
Gnu C                  2.95.4
Gnu make               3.80
util-linux             2.11y
mount                  2.11y
modutils               2.4.21
e2fsprogs              1.32
PPP                    2.4.1
isdn4k-utils           3.2p1
Linux C Library        2.3.1
Dynamic linker (ldd)   2.3.1
Procps                 3.1.6
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               4.5.9
Modules Loaded         floppy nvidia

I get a Message:

root@smilebef:/usr/src/linux# make xconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts kconfig.tk
make[1]: Entering directory `/usr/src/kernel-source-2.4.20/scripts'
cat header.tk >> ./kconfig.tk
./tkparse < ../arch/i386/config.in >> kconfig.tk
echo "set defaults \"arch/i386/defconfig\"" >> kconfig.tk
echo "set ARCH \"i386\"" >> kconfig.tk
cat tail.tk >> kconfig.tk
chmod 755 kconfig.tk
make[1]: Leaving directory `/usr/src/kernel-source-2.4.20/scripts'
wish -f scripts/kconfig.tk
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_PARPORT_PC_PCMCIA).
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_PARPORT_PC_PCMCIA).
root@smilebef:/usr/src/linux#

The Problem is while configuring the Parallelport and saving the changes.


It's only by change 'PCI - Support'
Including the 'PCMCIA - Support'
In Section 'ParallelPort' (PCMCIA-Parallelport-Support)
You must set 'PC-Style' of 'm' to disabeln this error.
But i want PC = y and PCMCIA-Parallel = n.

I don't know what is it.
Think a failor in configuration script.

Danks

Smilie


[-- Attachment #2: bug --]
[-- Type: text/plain, Size: 10467 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_PPRO_FENCE=y
# CONFIG_X86_F00F_WORKS_OK is not set
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_BIGPHYS_AREA is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_TSC_DISABLE is not set

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_ISA is not set
# CONFIG_PCI_NAMES is not set
CONFIG_EISA=y
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_CARDBUS is not set
# CONFIG_TCIC is not set
# CONFIG_I82092 is not set
CONFIG_I82365=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_STATS is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set

#
#  
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m
CONFIG_AIRONET4500=m
CONFIG_AIRONET4500_NONCS=m
# CONFIG_AIRONET4500_PNP is not set
# CONFIG_AIRONET4500_PCI is not set
# CONFIG_AIRONET4500_ISA is not set
CONFIG_AIRONET4500_I365=y
CONFIG_AIRONET4500_PROC=m
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_PCI_HERMES is not set

#
# Wireless Pcmcia cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_NET_WIRELESS=y

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input core support
#
# CONFIG_INPUT is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_HVC_CONSOLE is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set

#
# Input core support is needed for gameports
#

#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFSD is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

#
# Library routines
#
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: PROBLEM
  2003-03-09 11:49 PROBLEM Kósa Ferenc
@ 2003-03-09 12:55 ` John Bradford
  0 siblings, 0 replies; 19+ messages in thread
From: John Bradford @ 2003-03-09 12:55 UTC (permalink / raw)
  To: Kósa Ferenc; +Cc: linux-kernel

> 1. Newer kernels do not boot on 386
> 
> 2. I use linux successfully since 1997. A year ago I've tried to use
> linux on an AMD 5x86, and I realized that newer kernels (>2.4.13) do no=
> t
> boot. It starts: "loading linux........" and then after a while it
> reboots the computer, before "Ok, booting the kernel". I found the same
> problem on a Cyrix 486SLC2 too. I tried compile kernels by myself, but
> they did the same too, except for 2.4.13. The official Debian
> kernel-images failed too. I use lilo-2.2, with debian 3.0 stable
> (woody).

I've used 2.4.18 extensively on an Intel 486 SX-25, without problems.
I did notice the immediate rebooting problem using a few old 2.5.x
trees, but that was months ago, around the 2.5.40 timeframe, more
recent 2.5.x trees worked fine.

Incidently, I haven't had time to do my usual testing on low spec
machines recently, but intend restart that at the earliest
opportunity.

John.

^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2003-03-09 11:49 Kósa Ferenc
  2003-03-09 12:55 ` PROBLEM John Bradford
  0 siblings, 1 reply; 19+ messages in thread
From: Kósa Ferenc @ 2003-03-09 11:49 UTC (permalink / raw)
  To: linux-kernel

1. Newer kernels do not boot on 386

2. I use linux successfully since 1997. A year ago I've tried to use
linux on an AMD 5x86, and I realized that newer kernels (>2.4.13) do not
boot. It starts: "loading linux........" and then after a while it
reboots the computer, before "Ok, booting the kernel". I found the same
problem on a Cyrix 486SLC2 too. I tried compile kernels by myself, but
they did the same too, except for 2.4.13. The official Debian
kernel-images failed too. I use lilo-2.2, with debian 3.0 stable
(woody).

3. Kernel 
4. Kernel version: >  2.4.13
5. No Oops..
6.  No shell script
7. AMD 5x86, Cyrix 486SLC2 -  4MB RAM 800MB ide hd, 200MB swap, no PCI,
no SCSI, 2 isa eexpress network adapters, 1 serial, 1 parallel ports,
lilo-2.2. boot loader, debian 3.0 stable woody linux
 
thanks for helping, regards

-- 
Kósa Ferenc <fkosa@eposta.hu>


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: Problem
  2002-12-31 16:19 Problem Amar Lior
@ 2002-12-31 17:38 ` Hugh Dickins
  0 siblings, 0 replies; 19+ messages in thread
From: Hugh Dickins @ 2002-12-31 17:38 UTC (permalink / raw)
  To: Amar Lior; +Cc: linux-kernel

On Tue, 31 Dec 2002, Amar Lior wrote:
> 
> I found a bug that cause the kernel to lockup.

In 2.4, yes.  Coincidentally, Mikael Starvik reported this just a
couple of weeks ago, though it has been lurking there for a long time.
In 2.5 it was fixed (in ignorance of the problem) a little while ago,
and Marcelo already has fix below in his BK tree towards 2.4.20-pre3.

Anyway, thanks a lot for making sure we know about it.  (The code was
_nearly_ right, the loop should have terminated when nr returned from
file_read_actor becomes 0: but there were _two_ declarations of nr,
and the nr tested to terminate the loop remained 1 throughout).

Hugh

diff -Nru a/mm/shmem.c b/mm/shmem.c
--- a/mm/shmem.c	Thu Dec 26 22:32:38 2002
+++ b/mm/shmem.c	Thu Dec 26 22:32:38 2002
@@ -919,14 +919,13 @@
 	struct inode *inode = filp->f_dentry->d_inode;
 	struct address_space *mapping = inode->i_mapping;
 	unsigned long index, offset;
-	int nr = 1;
 
 	index = *ppos >> PAGE_CACHE_SHIFT;
 	offset = *ppos & ~PAGE_CACHE_MASK;
 
-	while (nr && desc->count) {
+	for (;;) {
 		struct page *page;
-		unsigned long end_index, nr;
+		unsigned long end_index, nr, ret;
 
 		end_index = inode->i_size >> PAGE_CACHE_SHIFT;
 		if (index > end_index)
@@ -956,12 +955,14 @@
 		 * "pos" here (the actor routine has to update the user buffer
 		 * pointers and the remaining count).
 		 */
-		nr = file_read_actor(desc, page, offset, nr);
-		offset += nr;
+		ret = file_read_actor(desc, page, offset, nr);
+		offset += ret;
 		index += offset >> PAGE_CACHE_SHIFT;
 		offset &= ~PAGE_CACHE_MASK;
 	
 		page_cache_release(page);
+		if (ret != nr || !desc->count)
+			break;
 	}
 
 	*ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Problem
@ 2002-12-31 16:19 Amar Lior
  2002-12-31 17:38 ` Problem Hugh Dickins
  0 siblings, 1 reply; 19+ messages in thread
From: Amar Lior @ 2002-12-31 16:19 UTC (permalink / raw)
  To: linux-kernel; +Cc: Amar Lior

Hi all,

I found a bug that cause the kernel to lockup.

The problem is in mm/shmem.c do_shmem_file_read() (the tmpfs)

at line 959 there is a call to file_read_actor(desc, page, offset, nr);

The problem is that inside the function file_read_actor() desc->error is
set to -EFAULT (this happens when the buffer supplied by the user for the 
read is wrong)
but there is no check right after the return from file_read_actor() to
test this situation.

The result is that the desc->count field always stay the same and the
while loop in do_shmem_file_read never end and the kernel locksup.

The fix is very simple just add the following line after the call to 
file_read_actor():

-------------------
if(desc->error)
        break
-------------------

If you need any other info please mail me

Regards

--lior


________________________________________________________________   
Lior Amar                       Distributed Computing Lab MOSIX
E-mail  : lior@cs.huji.ac.il                           
________________________________________________________________   


^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2002-12-31 16:18 Amar Lior
  0 siblings, 0 replies; 19+ messages in thread
From: Amar Lior @ 2002-12-31 16:18 UTC (permalink / raw)
  To: linux-kernel; +Cc: Amar Lior

Hi all,

I found a bug that cause the kernel to lockup.

The problem is in mm/shmem.c do_shmem_file_read() (the tmpfs)

at line 959 there is a call to file_read_actor(desc, page, offset, nr);

The problem is that inside the function file_read_actor() desc->error is
set to -EFAULT (this happens when the buffer supplied by the user for the 
read is wrong)
but there is no check right after the return from file_read_actor() to
test this situation.

The result is that the desc->count field always stay the same and the
while loop in do_shmem_file_read never end and the kernel locksup.

The fix is very simple just add the following line after the call to 
file_read_actor():

-------------------
if(desc->error)
	break
-------------------


If you need any other info please mail me

Regards

--lior


________________________________________________________________   
Lior Amar                       Distributed Computing Lab MOSIX
E-mail  : lior@cs.huji.ac.il                           
________________________________________________________________   


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Problem
@ 2002-08-29 19:55 Ryan White
  0 siblings, 0 replies; 19+ messages in thread
From: Ryan White @ 2002-08-29 19:55 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: TEXT/PLAIN, Size: 1507 bytes --]

Summary
-------
System freezes when writing large amount of data to external buffer drive.


Full Description
----------------
I was created 4 large files on an externally mounted Hard Drive.  Doing 
this using the dd command.  Each file is roughly about 600MB or so.  After 
doing this for a while, the system just hangs and doesn't do anything 
else.  I can't access the drive or do an 'ls' on them either.  The light 
on the drives is constany lit as well, which never happens unless error.


Kernel Version
--------------
We are using verions 2.4.19


Output
------
The only output would be to whatever comes out from what we're running.  
We don't run a program with output, only in the background.  So there is 
no output when the systems hangs.


Example to Duplicate Problem
----------------------------
Just running several dd commands at the same times.  I just put it in a 
loop and ran the same command but change the output file name.  

dd if=/dev/zero of=/buffer1/tmp.file$i bs=1k count=600000 &

thats basically it, except forthe loop that i executed 4 times.


Environment
-----------
I saved a script file to showsome of the setting on the environmen.  It is 
saved as an attachment.


The SCSI hard disk that we are using is: IBM-DDRS-34560-S97B cyl 8186 alt 
2 hd 5 sec 218) and approx 4GB.


Please let me know if this is a bug or not....






Ryan White
Software Engineer

Luminex Software, Inc.
6840 Indiana Avenue, Suite 130
Riverside, CA 92506
909.781.4100 x159
rwhite@luminex.com

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: Type: TEXT/PLAIN; charset=X-UNKNOWN; name=typescript, Size: 8344 bytes --]

Script started on Thu Aug 29 12:53:56 2002
^[]0;root@linux:/\a[root@linux /]# cat /proc/cpuinfo\r
processor	: 0\r
vendor_id	: GenuineIntel\r
cpu family	: 6\r
model		: 7\r
model name	: Pentium III (Katmai)\r
stepping	: 3\r
cpu MHz		: 501.140\r
cache size	: 512 KB\r
fdiv_bug	: no\r
hlt_bug		: no\r
f00f_bug	: no\r
coma_bug	: no\r
fpu		: yes\r
fpu_exception	: yes\r
cpuid level	: 2\r
wp		: yes\r
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse\r
bogomips	: 999.42\r
\r
^[]0;root@linux:/\a[root@linux /]# cat /proc/modules\r
nfs                    83680   1 (autoclean)\r
nfsd                   71808   0 (autoclean)\r
lockd                  53744   1 (autoclean) [nfs nfsd]\r
sunrpc                 70000   1 (autoclean) [nfs nfsd lockd]\r
autofs                 12096   1 (autoclean)\r
tulip                  39776   1\r
usb-uhci               22880   0 (unused)\r
usbcore                54528   1 [usb-uhci]\r
ext3                   67728   2\r
jbd                    44480   2 [ext3]\r
aic7xxx               114704   0 (unused)\r
sd_mod                 11584   0 (unused)\r
scsi_mod               98512   2 [aic7xxx sd_mod]\r
^[]0;root@linux:/\a[root@linux /]# cat /proc/ioports \r
0000-001f : dma1\r
0020-003f : pic1\r
0040-005f : timer\r
0060-006f : keyboard\r
0070-007f : rtc\r
0080-008f : dma page reg\r
00a0-00bf : pic2\r
00c0-00df : dma2\r
00f0-00ff : fpu\r
01f0-01f7 : ide0\r
0213-0213 : isapnp read\r
02f8-02ff : serial(auto)\r
03c0-03df : vga+\r
03e8-03ef : serial(auto)\r
03f6-03f6 : ide0\r
03f8-03ff : serial(auto)\r
0a79-0a79 : isapnp write\r
0cf8-0cff : PCI conf1\r
4000-403f : Intel Corporation 82371AB PIIX4 ACPI\r
5000-501f : Intel Corporation 82371AB PIIX4 ACPI\r
c000-cfff : PCI Bus #01\r
  c000-c0ff : ATI Technologies Inc 3D Rage IIC AGP\r
d000-dfff : PCI Bus #02\r
  d000-d07f : Digital Equipment Corporation DECchip 21140 [FasterNet]\r
    d000-d07f : tulip\r
  d400-d47f : Digital Equipment Corporation DECchip 21140 [FasterNet] (#2)\r
    d400-d47f : tulip\r
e000-e01f : Intel Corporation 82371AB PIIX4 USB\r
  e000-e01f : usb-uhci\r
e400-e4ff : Adaptec AHA-2940U2/W / 7890\r
  e400-e4fe : aic7xxx\r
f000-f00f : Intel Corporation 82371AB PIIX4 IDE\r
  f000-f007 : ide0\r
  f008-f00f : ide1\r
^[]0;root@linux:/\a[root@linux /]# lspci -vvv\r
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)\r
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-\r
	Latency: 64\r
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]\r
	Capabilities: [a0] AGP version 1.0\r
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2\r
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>\r
\r
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-\r
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64\r
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64\r
	I/O behind bridge: 0000c000-0000cfff\r
	Memory behind bridge: e8000000-e9ffffff\r
	Prefetchable memory behind bridge: ea000000-eaffffff\r
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+\r
\r
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 0\r
\r
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])\r
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64\r
	Region 4: I/O ports at f000 [size=16]\r
\r
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])\r
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64\r
	Interrupt: pin D routed to IRQ 19\r
	Region 4: I/O ports at e000 [size=32]\r
\r
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)\r
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Interrupt: pin ? routed to IRQ 9\r
\r
00:0b.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-\r
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64, cache line size 02\r
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64\r
	I/O behind bridge: 0000d000-0000dfff\r
	Memory behind bridge: e4000000-e7ffffff\r
	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000\r
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-\r
	Capabilities: [dc] Power Management version 1\r
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)\r
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-\r
		Bridge: PM- B3+\r
\r
00:0c.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890\r
	Subsystem: Adaptec 2940U2W SCSI Controller\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64 (9750ns min, 6250ns max), cache line size 08\r
	Interrupt: pin A routed to IRQ 18\r
	BIST result: 00\r
	Region 0: I/O ports at e400 [size=256]\r
	Region 1: Memory at ec000000 (64-bit, non-prefetchable) [size=4K]\r
	Expansion ROM at eb000000 [disabled] [size=128K]\r
	Capabilities: [dc] Power Management version 1\r
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)\r
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-\r
\r
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a) (prog-if 00 [VGA])\r
	Subsystem: ATI Technologies Inc: Unknown device 0084\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-\r
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64 (2000ns min), cache line size 08\r
	Interrupt: pin A routed to IRQ 16\r
	Region 0: Memory at ea000000 (32-bit, prefetchable) [size=16M]\r
	Region 1: I/O ports at c000 [size=256]\r
	Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=4K]\r
	Expansion ROM at <unassigned> [disabled] [size=128K]\r
	Capabilities: [5c] Power Management version 1\r
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)\r
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-\r
\r
02:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64 (5000ns min, 10000ns max), cache line size 08\r
	Interrupt: pin A routed to IRQ 19\r
	Region 0: I/O ports at d000 [size=128]\r
	Region 1: Memory at e6001000 (32-bit, non-prefetchable) [size=128]\r
	Expansion ROM at e4000000 [disabled] [size=256K]\r
\r
02:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)\r
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-\r
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-\r
	Latency: 64 (5000ns min, 10000ns max), cache line size 08\r
	Interrupt: pin A routed to IRQ 16\r
	Region 0: I/O ports at d400 [size=128]\r
	Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=128]\r
	Expansion ROM at e5000000 [disabled] [size=256K]\r
\r
^[]0;root@linux:/\a[root@linux /]# exit\r
exit\r

Script done on Thu Aug 29 12:54:42 2002

^ permalink raw reply	[flat|nested] 19+ messages in thread

* PROBLEM
@ 2002-08-14 14:20 Bob Kruger
  0 siblings, 0 replies; 19+ messages in thread
From: Bob Kruger @ 2002-08-14 14:20 UTC (permalink / raw)
  To: linux-kernel

1.  Printing output corrupted using kernel 2.4.19.
2.  Print output from three Linux servers corrupted.  These servers are 
running Samba 2.2.5, and are Slackware 8.0 or 8.1 systems.  Print output 
from Windows platforms, especially .pdf files, gets corrupted.  Half 
pages are printed.  Pages are repeated, etc.  Drop back to the 2.4.18 
kernel, and the problem goes away.  Kernel on all systems compiled 
locally, e.g. on each system.  Print daemon is from the LPRng package. 
 Printers include TCP/IP printers (LPRng redirect using printcap) and 
those attached via parallel ports.  Windows systems include XP, 2000, 
and 98.  Regardless of the OS, the printer output is corrupted w/ 2.4.19 
kernel, but works fine when kernel 2.4.18 is run.
3.  Kernel, printing
4.  Kernel version - 2.4.19
5.  Output - no error messages reported
6.  Shell Script - not applicable.
7.  Environment:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux wdbbl080104 2.4.19 #2 SMP Mon Aug 12 10:31:39 EDT 2002 i586 unknown
 
Gnu C                  2.95.3
Gnu make               3.79.1
util-linux             2.11r
mount                  2.11r
modutils               2.4.16
e2fsprogs              1.19
reiserfsprogs          3.x.0b
pcmcia-cs              3.1.33
PPP                    2.4.1
Linux C Library        2.2.5
Dynamic linker (ldd)   2.2.5
Procps                 2.0.7
Net-tools              1.60
Kbd                    1.06
Sh-utils               2.0
Modules Loaded         bsd_comp ppp_generic slhc slip

No module info necessary, as lp is compiled as part of the kernel.

If any other info is needed, please let me know.

As always, my thanks for your hard work.  

Regards - Bob Kruger


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Problem
@ 2001-09-11 23:16 George Lloyd
  0 siblings, 0 replies; 19+ messages in thread
From: George Lloyd @ 2001-09-11 23:16 UTC (permalink / raw)
  To: linux-kernel

Hi,

I was not sure where to send this report so I hope it's correct.

Since Version 2.4.3 of the kernel I have been unable to use my scsi cdrom 
drive.  The adapter card is a Adaptec AHA-1542 and the CDROM drive a 
Phillips CDD3600. When I try to mount the drive I get the following.

Vendor: Phillps Model:CD3600 CD-R/RW Rev 2.00
Type - CD-ROM ANSI SCSI Revision: 02
Detected scsi3-mmc drive: 2x6 writer cd/-w form2 cdda trgg
sr: ran out of mem for sectter pad
kernel panic : scsi_free : bad offset

Version 2.4.3 is the last version the above works on. Can you help?

George Lloyd
g.lloyd@btinternet.com
Home Page for NNA Software
http://www.nna.btinternet.co.uk


^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2007-04-27  1:35 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-30  4:07 PROBLEM Mike Morrell
2003-11-30  6:05 ` PROBLEM Chris Ernst
  -- strict thread matches above, loose matches on Subject: below --
2007-04-27  1:35 PROBLEM Thomas Kayser
2006-02-03 12:02 PROBLEM Badri Pillai
2004-12-24  4:22 PROBLEM Scott Mollica
2004-12-27  3:28 ` PROBLEM Adrian Bunk
2003-12-19 18:10 PROBLEM Federico Freire
2003-12-19 18:25 ` PROBLEM Jean-Philippe Woot de Trixhe
2003-12-19 19:29   ` PROBLEM Jose Luis Domingo Lopez
2003-10-21 13:39 PROBLEM laurent.miaille
2003-03-13 21:40 Problem Smiler
2003-03-09 11:49 PROBLEM Kósa Ferenc
2003-03-09 12:55 ` PROBLEM John Bradford
2002-12-31 16:19 Problem Amar Lior
2002-12-31 17:38 ` Problem Hugh Dickins
2002-12-31 16:18 PROBLEM Amar Lior
2002-08-29 19:55 Problem Ryan White
2002-08-14 14:20 PROBLEM Bob Kruger
2001-09-11 23:16 Problem George Lloyd

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).