linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* 2.4.23 : timeouts and lost interrupts using IDE-SCSI
@ 2003-12-03 16:41 Jimmie Mayfield
  0 siblings, 0 replies; 3+ messages in thread
From: Jimmie Mayfield @ 2003-12-03 16:41 UTC (permalink / raw)
  To: linux-kernel


Since upgrading from 2.4.20 to 2.4.23, I can no longer mount my ATAPI CDROM and
CDR/W drives using IDE-SCSI.  Attempts to mount those drives result in
lost interrupts messages:

Dec  3 08:21:10 kaon kernel: scsi : aborting command due to timeout : pid 2114, scs
i2, channel 0, id 0, lun 0 Read (10) 00 00 00 00 10 00 00 01 00 
Dec  3 08:21:10 kaon kernel: hdc: DMA interrupt recovery
Dec  3 08:21:10 kaon kernel: hdc: lost interrupt


Kernel is able to successfully probe for and identify these devices, however:

Dec  3 08:20:40 kaon kernel: hdc: attached ide-scsi driver.
Dec  3 08:20:41 kaon kernel: hdd: attached ide-scsi driver.
Dec  3 08:20:41 kaon kernel: scsi2 : SCSI host adapter emulation for IDE ATAPI devi
ces
Dec  3 08:20:41 kaon kernel:   Vendor: HITACHI   Model: CDR-8430          Rev: 0024
Dec  3 08:20:41 kaon kernel:   Type:   CD-ROM                             ANSI SCSI
 revision: 02
Dec  3 08:20:41 kaon kernel:   Vendor:           Model: CD-R/RW RW7060A   Rev: 1.50
Dec  3 08:20:41 kaon kernel:   Type:   CD-ROM                             ANSI SCSI
 revision: 02
Dec  3 08:20:41 kaon kernel: Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lu
n 0
Dec  3 08:20:41 kaon kernel: Attached scsi CD-ROM sr1 at scsi2, channel 0, id 1, lu
n 0
Dec  3 08:20:41 kaon kernel: sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray
Dec  3 08:20:41 kaon kernel: Uniform CD-ROM driver Revision: 3.12
Dec  3 08:20:41 kaon kernel: sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cd
da tray


I can revert back to 2.4.20 and the drives are mountable once again so I do not
believe it's a hardware failure.  Similarly, I can build 2.4.23 with IDE CDROM
support instead of relying on SCSI emulation and things work (though I suspect
not having SCSI emulation enabled will cause problems when burning CDs).


System specs:

IBM Intellistation MPro
SMP P2-400 (2 CPUs)
440BX chipset
ACPI automatically disabled "because your bios is from 98 and too old"
CDROM as hdc, CDR/W as hdd
   both these devices are attached to the onboard PIIX4 controller
kernels compiled with gcc 2.95.3


Jimmie

-- 
Jimmie Mayfield  
http://www.sackheads.org/mayfield       email: mayfield+kernel@sackheads.org
My mail provider does not welcome UCE -- http://www.sackheads.org/uce


^ permalink raw reply	[flat|nested] 3+ messages in thread
[parent not found: <YImw.6Dc.5@gated-at.bofh.it>]

end of thread, other threads:[~2003-12-05 23:36 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-03 16:41 2.4.23 : timeouts and lost interrupts using IDE-SCSI Jimmie Mayfield
     [not found] <YImw.6Dc.5@gated-at.bofh.it>
2003-12-04 16:09 ` Kristian Peters
2003-12-05 23:33   ` Daniel B.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).