From: Mike Fedyk <mfedyk@matchmail.com>
To: Allen Martin <AMartin@nvidia.com>
Cc: "'Mikael Pettersson'" <mikpe@csd.uu.se>,
Josh McKinney <forming@charter.net>,
linux-kernel@vger.kernel.org
Subject: Re: Catching NForce2 lockup with NMI watchdog
Date: Fri, 5 Dec 2003 14:55:54 -0800 [thread overview]
Message-ID: <20031205225554.GT29119@mis-mike-wstn.matchmail.com> (raw)
In-Reply-To: <DCB9B7AA2CAB7F418919D7B59EE45BAF49F877@mail-sc-6.nvidia.com>
On Fri, Dec 05, 2003 at 11:11:39AM -0800, Allen Martin wrote:
> NVIDIA doesn't provide a windows driver to setup APIC interrupts. APIC
> functionality is exported through the ACPI methods and MP table in the
> system BIOS which the motherboard vendors supply.
>
> Likely the root of the problem has to do with the way the Linux kernel is
> using the ACPI methods to setup the interrupts which is different from win
> 9x/2k/XP. I can help track this down, unfortunately so far I've been unable
> to reproduce the hangs on any of the boards I have.
Can the people with nforce chips run a command that will show the chipset
config space like was done back when there were problems with via chipsets
(before via released the specs on how to set the bits correctly).
Maybe you'll see some correlation between the boards that are crashing, and
a few bits that are different for the boards that aren't crashing.
next prev parent reply other threads:[~2003-12-05 22:56 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-05 19:11 Catching NForce2 lockup with NMI watchdog Allen Martin
2003-12-05 20:18 ` cheuche+lkml
2003-12-05 20:34 ` Prakash K. Cheemplavam
2003-12-05 21:02 ` Mike Fedyk
2003-12-05 20:55 ` Jesse Allen
2003-12-06 3:20 ` Jesse Allen
2003-12-05 20:36 ` Jesse Allen
2003-12-05 22:55 ` Mike Fedyk [this message]
2003-12-05 23:11 ` Craig Bradney
-- strict thread matches above, loose matches on Subject: below --
2003-12-17 18:14 Ross Dickson
2003-12-17 21:41 ` George Anzinger
2003-12-17 21:48 ` George Anzinger
2003-12-18 1:30 ` Ross Dickson
2003-12-18 14:32 ` Maciej W. Rozycki
2003-12-19 4:17 ` Ross Dickson
2003-12-19 15:35 ` Maciej W. Rozycki
2003-12-18 14:04 ` Maciej W. Rozycki
2003-12-18 14:22 ` Craig Bradney
2003-12-19 5:38 ` Ross Dickson
2003-12-19 10:36 ` Craig Bradney
2003-12-19 4:06 ` Ross Dickson
2003-12-19 15:33 ` Maciej W. Rozycki
2003-12-13 3:56 Ross Dickson
2003-12-15 13:16 ` Maciej W. Rozycki
2003-12-07 19:58 Fixes for nforce2 hard lockup, apic, io-apic, udma133 covered Ian Kumlien
2003-12-08 2:07 ` Ross Dickson
2003-12-09 18:12 ` Catching NForce2 lockup with NMI watchdog Ian Kumlien
2003-12-09 22:04 ` Craig Bradney
2003-12-09 23:13 ` Ian Kumlien
2003-12-10 6:14 ` Bob
2003-12-10 7:51 ` Craig Bradney
2003-12-05 22:41 b
2003-12-05 20:56 Allen Martin
2003-12-05 4:54 Jesse Allen
2003-12-05 7:40 ` Mikael Pettersson
2003-12-05 8:33 ` Josh McKinney
2003-12-05 12:14 ` Mikael Pettersson
2003-12-05 14:19 ` Craig Bradney
2003-12-05 17:05 ` Craig Bradney
2003-12-05 18:11 ` Josh McKinney
2003-12-05 8:58 ` Mike Fedyk
2003-12-05 12:06 ` Mikael Pettersson
2003-12-08 2:20 ` Bob
2003-12-09 14:21 ` Maciej W. Rozycki
2003-12-09 16:35 ` Bob
2003-12-10 13:41 ` Maciej W. Rozycki
2003-12-12 16:01 ` bill davidsen
2003-12-12 16:47 ` Maciej W. Rozycki
2003-12-12 16:57 ` Richard B. Johnson
2003-12-12 17:21 ` Maciej W. Rozycki
2003-12-13 5:16 ` Bill Davidsen
2003-12-15 13:23 ` Maciej W. Rozycki
2003-12-12 22:27 ` George Anzinger
2003-12-15 13:13 ` Maciej W. Rozycki
2003-12-15 21:42 ` George Anzinger
2003-12-16 13:37 ` Maciej W. Rozycki
2003-12-16 13:57 ` Richard B. Johnson
2003-12-16 15:47 ` Maciej W. Rozycki
2003-12-16 16:44 ` Richard B. Johnson
2003-12-16 16:50 ` Maciej W. Rozycki
2003-12-16 17:26 ` George Anzinger
2003-12-16 20:54 ` Maciej W. Rozycki
2003-12-16 21:53 ` George Anzinger
2003-12-17 14:03 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031205225554.GT29119@mis-mike-wstn.matchmail.com \
--to=mfedyk@matchmail.com \
--cc=AMartin@nvidia.com \
--cc=forming@charter.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mikpe@csd.uu.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).