linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: William Park <opengeometry@yahoo.ca>
To: linux-kernel@vger.kernel.org
Subject: Re: SMP broken on Dell PowerEdge 4100/200 under 2.6.0-testxx?
Date: Sat, 6 Dec 2003 12:38:50 -0500	[thread overview]
Message-ID: <20031206173850.GB362@node1.opengeometry.net> (raw)
In-Reply-To: <fa.f9f2gij.1kua0f@ifi.uio.no>

On Sat, Dec 06, 2003 at 10:59:01AM +0000, William Lee Irwin III wrote:
> This leads to a similar conclusion to Stian Jordet's case. It's not
> mistaking you for HT, it's the lack of an internal distinction between
> the cases that need and don't need irq balancing.

I have VP6 (Apollo Pro 133A, 82c694X/686B) dual-P3 (800MHz/133MHz).  I'm
currently using MPS 1.1, because USB doesn't work with MPS 1.4 (or, it
does but only with 'noapic').  And, I can report the same finding as
others.

Before:
-------
           CPU0       CPU1       
  0:      79365         63    IO-APIC-edge  timer
  1:        215          1    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  4:       8654          0    IO-APIC-edge  serial
  8:          1          1    IO-APIC-edge  rtc
 12:         52          1    IO-APIC-edge  i8042
 14:       2155          0    IO-APIC-edge  ide0
 15:          2          0    IO-APIC-edge  ide1
 17:          0          0   IO-APIC-level  eth0
NMI:          0          0 
LOC:      79231      79266 
ERR:          0
MIS:          0

After 'noirqbalance':
---------------------
           CPU0       CPU1       
  0:      15039      16025    IO-APIC-edge  timer
  1:         47         75    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  4:         21         43    IO-APIC-edge  serial
  8:          2          0    IO-APIC-edge  rtc
 12:         21         32    IO-APIC-edge  i8042
 14:        828        410    IO-APIC-edge  ide0
 15:          2          0    IO-APIC-edge  ide1
 17:          0          0   IO-APIC-level  eth0
NMI:          0          0 
LOC:      30865      30900 
ERR:          0
MIS:          0

-- 
William Park, Open Geometry Consulting, <opengeometry@yahoo.ca>
Linux solution for data management and processing. 

       reply	other threads:[~2003-12-06 17:38 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <fa.jiqirm0.13gv2u@ifi.uio.no>
     [not found] ` <fa.f9f2gij.1kua0f@ifi.uio.no>
2003-12-06 17:38   ` William Park [this message]
     [not found] <10wU2-1mR-11@gated-at.bofh.it>
     [not found] ` <10wU2-1mR-13@gated-at.bofh.it>
     [not found]   ` <10wU2-1mR-15@gated-at.bofh.it>
     [not found]     ` <10wU3-1mR-17@gated-at.bofh.it>
     [not found]       ` <10wU3-1mR-19@gated-at.bofh.it>
     [not found]         ` <10wU3-1mR-21@gated-at.bofh.it>
     [not found]           ` <10wU3-1mR-23@gated-at.bofh.it>
     [not found]             ` <10wU3-1mR-25@gated-at.bofh.it>
     [not found]               ` <10wU2-1mR-9@gated-at.bofh.it>
     [not found]                 ` <10xGk-38t-15@gated-at.bofh.it>
2003-12-08 19:24                   ` SMP broken on Dell PowerEdge 4100/200 under 2.6.0-testxx? Matthew Kanar
     [not found] <ZAwx-88m-3@gated-at.bofh.it>
     [not found] ` <ZAGd-8ma-5@gated-at.bofh.it>
     [not found]   ` <ZAQ7-6X-13@gated-at.bofh.it>
     [not found]     ` <ZAZB-pS-11@gated-at.bofh.it>
     [not found]       ` <ZCoI-2oz-9@gated-at.bofh.it>
     [not found]         ` <ZCyh-2Bv-1@gated-at.bofh.it>
     [not found]           ` <ZCI5-2Pv-3@gated-at.bofh.it>
     [not found]             ` <ZCIb-2Pv-11@gated-at.bofh.it>
2003-12-08 16:42               ` Matthew Kanar
2003-12-08 17:21                 ` William Lee Irwin III
2003-12-08 17:38                 ` Zwane Mwaikambo
2003-12-06  2:32 Colin Coe
2003-12-06  2:42 ` William Lee Irwin III
2003-12-06  2:48   ` William Lee Irwin III
2003-12-06  2:48   ` Nick Piggin
2003-12-06  3:07     ` William Lee Irwin III
2003-12-06  4:28       ` Stian Jordet
2003-12-06  4:37         ` William Lee Irwin III
2003-12-06  4:48           ` Stian Jordet
2003-12-06  4:54             ` William Lee Irwin III
2003-12-06  4:57               ` Stian Jordet
2003-12-06  5:09                 ` William Lee Irwin III
2003-12-06  5:14                   ` Stian Jordet
2003-12-06  5:40                     ` William Lee Irwin III
2003-12-08 15:57                       ` bill davidsen
2003-12-08 16:47                         ` William Lee Irwin III
2003-12-06  7:11               ` Colin Coe
2003-12-08 15:45               ` bill davidsen
2003-12-08 17:36                 ` Zwane Mwaikambo
2003-12-06 14:07           ` Adam Kropelin
2003-12-06  7:02       ` Colin Coe
2003-12-06 10:58         ` William Lee Irwin III
2003-12-06 20:08         ` Ethan Weinstein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20031206173850.GB362@node1.opengeometry.net \
    --to=opengeometry@yahoo.ca \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).