linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* 2.6.0-test11:ide-disk partitions not mountable
@ 2003-12-09 18:17 Matthias Krebs
  2003-12-09 18:46 ` Matthias Krebs
  0 siblings, 1 reply; 2+ messages in thread
From: Matthias Krebs @ 2003-12-09 18:17 UTC (permalink / raw)
  To: linux-kernel

I have two ide-controllers, one onboard (VIA vt8233a) and one as pci-card 
(Promise ultra100 tx2). The following drives are attached:

Controller1:
/dev/ide/host0/bus0/target0/lun0/disc ibm harddisk (hda)
/dev/ide/host0/bus1/target0/lun0/cd ide cd-writer
/dev/ide/host0/bus1/target1/lun0/cd ide dvd-rom

Controller2:
/dev/ide/host2/bus1/target0/lun0/disc maxtor harddisk (hde)
/dev/ide/host2/bus1/target1/lun0/disc maxtor harddisk (hdg)

The system (debian unstable) boots from an raid0 on hde/hdg. hda can be 
accesed by parted,fdsik etc., partitions and filesystems can be created. But 
when i try to mount any partiton on hda i get:

mount: /dev/hda2 already mounted or /mnt/hda2/ busy

which it isn`t (cat /proc/mounts). All partitions can be mounted under 2.4 
kernels.

Is it now necessary to use kernel option "Boot off-board chipsets first 
support" for this kind of setup?

Bye, Matthias

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: 2.6.0-test11:ide-disk partitions not mountable
  2003-12-09 18:17 2.6.0-test11:ide-disk partitions not mountable Matthias Krebs
@ 2003-12-09 18:46 ` Matthias Krebs
  0 siblings, 0 replies; 2+ messages in thread
From: Matthias Krebs @ 2003-12-09 18:46 UTC (permalink / raw)
  To: linux-kernel

Err, I forgot to mention that the two cdrom drives on the first controller can 
be mounted.

Bye, Matthias

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-12-09 18:46 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-09 18:17 2.6.0-test11:ide-disk partitions not mountable Matthias Krebs
2003-12-09 18:46 ` Matthias Krebs

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).