From: Duncan Sands <baldrick@free.fr>
To: Alan Stern <stern@rowland.harvard.edu>,
David Brownell <david-b@pacbell.net>
Cc: Vince <fuzzy77@free.fr>, "Randy.Dunlap" <rddunlap@osdl.org>,
<mfedyk@matchmail.com>, <zwane@holomorphy.com>,
<linux-kernel@vger.kernel.org>,
USB development list <linux-usb-devel@lists.sourceforge.net>,
Greg KH <greg@kroah.com>
Subject: Re: [linux-usb-devel] Re: [OOPS, usbcore, releaseintf] 2.6.0-test10-mm1
Date: Wed, 10 Dec 2003 14:12:57 +0100 [thread overview]
Message-ID: <200312101412.57388.baldrick@free.fr> (raw)
In-Reply-To: <Pine.LNX.4.44L0.0312092233340.6615-100000@netrider.rowland.org>
> In an earlier message I wrote that the HC driver couldn't unload so long
> as the device usbfs was using held a reference to its bus. I just did
> some checking, and guess what: It can!
Uh oh.
> I looked at both the UHCI and OHCI drivers. In their module_exit routines
> they call pci_unregister_driver(). Without knowing how the PCI subsystem
> works, I would assume this behaves like any other "deregister" routine in
> the driver model and returns without waiting for any reference count to go
> to 0 -- that's what release callbacks are for.
>
> However, the module_exit routines _don't_ wait for the release callbacks.
> They just go right on ahead and exit. Result: when the reference count
> eventually does go to 0 (when usbfs drops its last reference), the
> hcd_free routine is no longer present and you get an oops.
>
> The proper fix would be to have each HC driver keep track of how many
> instances are allocated. The module_exit routine must wait for that
> number to drop to 0 before returning.
Is this how it is usually done?
All the best,
Duncan.
next prev parent reply other threads:[~2003-12-10 13:13 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-26 16:51 [kernel panic @ reboot] 2.6.0-test10-mm1 Vince
2003-11-26 17:16 ` Zwane Mwaikambo
2003-11-26 17:34 ` Vince
2003-11-26 17:35 ` Randy.Dunlap
2003-11-26 17:40 ` Zwane Mwaikambo
2003-11-26 17:54 ` Vince
2003-11-26 18:18 ` Zwane Mwaikambo
2003-11-26 23:37 ` Mike Fedyk
2003-11-26 23:41 ` Vince
2003-12-03 0:03 ` Randy.Dunlap
2003-12-03 0:31 ` Mike Fedyk
2003-12-03 0:27 ` Randy.Dunlap
2003-12-03 13:28 ` Vince
2003-12-03 19:12 ` Zwane Mwaikambo
2003-12-04 1:01 ` Vince
2003-12-04 1:34 ` Mike Fedyk
2003-12-04 4:11 ` Randy.Dunlap
2003-12-04 10:59 ` [OOPS, usbcore, releaseintf] 2.6.0-test10-mm1 Vince
2003-12-04 11:14 ` Duncan Sands
2003-12-04 16:57 ` Randy.Dunlap
2003-12-05 7:38 ` Duncan Sands
2003-12-05 10:11 ` Vince
2003-12-05 10:18 ` Duncan Sands
2003-12-05 10:34 ` Vince
2003-12-07 0:25 ` Duncan Sands
2003-12-07 21:09 ` Vince
2003-12-07 21:24 ` Duncan Sands
2003-12-07 22:24 ` Vince
2003-12-07 22:54 ` Vince
2003-12-08 10:10 ` Duncan Sands
2003-12-08 16:03 ` [linux-usb-devel] " David Brownell
2003-12-08 16:15 ` Duncan Sands
2003-12-08 16:31 ` Alan Stern
2003-12-08 17:20 ` David Brownell
2003-12-08 17:59 ` Duncan Sands
2003-12-08 18:35 ` Alan Stern
2003-12-08 19:53 ` Duncan Sands
2003-12-08 21:32 ` Alan Stern
2003-12-08 21:55 ` Duncan Sands
2003-12-08 23:09 ` Alan Stern
2003-12-09 10:23 ` Duncan Sands
2003-12-09 15:55 ` Alan Stern
2003-12-09 20:36 ` Duncan Sands
2003-12-09 10:36 ` Duncan Sands
2003-12-09 16:08 ` Alan Stern
2003-12-09 20:24 ` Duncan Sands
2003-12-09 10:49 ` Duncan Sands
2003-12-09 15:47 ` Alan Stern
2003-12-09 21:12 ` Duncan Sands
2003-12-09 21:58 ` Alan Stern
2003-12-09 22:07 ` Duncan Sands
2003-12-09 22:25 ` David Brownell
2003-12-09 22:33 ` Duncan Sands
2003-12-10 3:12 ` David Brownell
2003-12-10 3:43 ` Alan Stern
2003-12-10 13:12 ` Duncan Sands [this message]
2003-12-10 15:13 ` Alan Stern
2003-12-10 15:30 ` Greg KH
2003-12-10 16:02 ` Duncan Sands
2003-12-10 20:53 ` Greg KH
2003-12-11 8:49 ` Duncan Sands
2003-12-11 9:23 ` Greg KH
2003-12-11 9:29 ` Duncan Sands
2003-12-10 17:25 ` Alan Stern
2003-12-10 20:46 ` Greg KH
2003-12-10 21:08 ` Greg KH
2003-12-11 2:10 ` Vince
2003-12-11 6:46 ` Greg KH
2003-12-10 22:08 ` Alan Stern
2003-12-11 6:47 ` Greg KH
2003-12-10 4:31 ` Vince
2003-12-10 1:49 ` Greg KH
2003-12-10 13:22 ` Duncan Sands
2003-12-10 16:20 ` Oliver Neukum
2003-12-10 16:49 ` Duncan Sands
2003-12-10 16:58 ` Oliver Neukum
2003-12-11 9:45 ` Duncan Sands
2003-12-11 10:19 ` Oliver Neukum
2003-12-11 21:43 ` Duncan Sands
2003-12-11 22:57 ` Oliver Neukum
2003-12-11 23:30 ` Duncan Sands
2003-12-12 0:02 ` David Brownell
2003-12-10 17:34 ` David Brownell
2003-12-10 17:54 ` Duncan Sands
2003-12-10 18:19 ` Alan Stern
2003-12-11 9:36 ` Duncan Sands
2003-12-11 15:19 ` Alan Stern
2003-12-11 21:23 ` Duncan Sands
2003-12-12 15:46 ` Alan Stern
2003-12-11 21:29 ` Duncan Sands
2003-12-12 16:18 ` Alan Stern
2003-12-12 18:37 ` David Brownell
2003-12-12 19:17 ` Alan Stern
2003-12-12 19:45 ` David Brownell
2003-12-12 20:48 ` Alan Stern
2003-12-12 21:01 ` Oliver Neukum
2003-12-12 21:27 ` Alan Stern
2003-12-12 23:36 ` Oliver Neukum
2003-12-13 1:10 ` Alan Stern
2003-12-13 11:52 ` Oliver Neukum
2003-12-12 18:50 ` Oliver Neukum
2003-12-10 19:43 ` David Brownell
2003-12-11 9:21 ` Duncan Sands
2003-12-10 17:21 ` David Brownell
2003-12-11 9:42 ` Duncan Sands
2003-12-12 2:21 ` David Brownell
2003-12-12 8:47 ` Duncan Sands
2003-12-12 15:35 ` bill davidsen
2003-12-05 0:08 ` [kernel panic @ reboot] 2.6.0-test10-mm1 Zwane Mwaikambo
2003-11-27 0:59 ` [kernel panic @ reboot in usbcore] 2.6.0-test10-mm1 (culprit: modem_run) Vince
2003-11-27 3:13 ` Zwane Mwaikambo
2003-11-27 8:14 ` Vince
2003-11-27 8:11 ` Duncan Sands
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200312101412.57388.baldrick@free.fr \
--to=baldrick@free.fr \
--cc=david-b@pacbell.net \
--cc=fuzzy77@free.fr \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=mfedyk@matchmail.com \
--cc=rddunlap@osdl.org \
--cc=stern@rowland.harvard.edu \
--cc=zwane@holomorphy.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).