From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265198AbTLKRXd (ORCPT ); Thu, 11 Dec 2003 12:23:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265174AbTLKRXR (ORCPT ); Thu, 11 Dec 2003 12:23:17 -0500 Received: from fed1mtao01.cox.net ([68.6.19.244]:17544 "EHLO fed1mtao01.cox.net") by vger.kernel.org with ESMTP id S265169AbTLKRWn (ORCPT ); Thu, 11 Dec 2003 12:22:43 -0500 Date: Thu, 11 Dec 2003 10:25:49 -0700 From: Jesse Allen To: "Maciej W. Rozycki" Cc: linux-kernel@vger.kernel.org Subject: Re: Fixes for nforce2 hard lockup, apic, io-apic, udma133 covered Message-ID: <20031211172549.GA272@tesore.local> References: <200312072312.01013.ross@datscreative.com.au> <200312101543.39597.ross@datscreative.com.au> <200312111655.25456.ross@datscreative.com.au> <20031211162303.GA18338@forming> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Dec 11, 2003 at 06:04:54PM +0100, Maciej W. Rozycki wrote: > On Thu, 11 Dec 2003, Josh McKinney wrote: > > > Should I try it with just the acpi fixes sent by Maciej or are these > > just general fixes? > > They should make (at least some of) the reported problems go away, > superseding the respective workarounds. > As far as I can tell, your patch _alone_ doesn't prevent the lockup, fix the timer, or nmi_watchdog. I have attached a dmesg of my current running kernel that includes Ross' io_apic patch, the disconnect quirk patch, your acpi patch, and other minor patches. ACPI and APIC debugging are on. Linux version 2.6.0-test11 (jesse@tesore) (gcc version 3.3.2) #2 Thu Dec 11 09:45:15 MST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6f60 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff7880 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) ACPI: INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0xf] global_irq[0xf] polarity[0x1] trigger[0x1]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=Linux-2.6 ro root=301 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1913.621 MHz processor. Console: colour VGA+ 80x25 Memory: 256144k/262080k available (1611k kernel code, 5212k reserved, 693k data, 128k init, 0k highmem) Calibrating delay loop... 3784.70 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2600+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ..TIMER: Is timer irq0 connected to IOAPIC Pin0? ... IOAPIC[0]: Set PCI routing entry (2-0 -> 0x31 -> IRQ 0 Mode:0 Active:0) ..TIMER: works OK on apic pin0 irq0 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 0 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2-> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1912.0861 MHz. ..... host bus clock speed is 332.0671 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:........................................................................................................................................................................................................................................................................................ Table [DSDT](id F004) - 761 Objects with 78 Devices 280 Methods 30 Regions ACPI Namespace successfully loaded at root c0378d3c IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000004020 on int 9 evgpeblk-0748 [06] ev_create_gpe_block : GPE 32 to 95 [_GPE] 8 regs at 00000000000044A0 on int 9 Completing Region/Field/Buffer/Package initialization:................................................................................................. Initialized 30/30 Regions 9/9 Fields 31/31 Buffers 27/27 Packages (769 nodes) Executing all Device _STA and_INI methods:............................................................................... 79 Devices found containing: 79 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) ACPI: PCI Interrupt Link [APC2] (IRQs 17) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs 16) pci_link-0262 [40] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) pci_link-0262 [42] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) pci_link-0262 [44] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) pci_link-0262 [47] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCS] (IRQs *23) pci_link-0262 [52] acpi_pci_link_get_curr: No IRQ resource found ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:0) 00:00:01[A] -> 2-23 -> IRQ 23 Pin 2-23 already programmed ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0) 00:00:02[A] -> 2-20 -> IRQ 20 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0) 00:00:02[B] -> 2-22 -> IRQ 22 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0) 00:00:02[C] -> 2-21 -> IRQ 21 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 16 Mode:1 Active:0) 00:01:08[A] -> 2-16 -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xd1 -> IRQ 17 Mode:1 Active:0) 00:01:08[B] -> 2-17 -> IRQ 17 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xd9 -> IRQ 18 Mode:1 Active:0) 00:01:08[C] -> 2-18 -> IRQ 18 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xe1 -> IRQ 19 Mode:1 Active:0) 00:01:08[D] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-19 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (38 C) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD200BB-00DEA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITA CR-585, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100) hda: hda1 hda2 hda3 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda1) for (hda1) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 128k freed Adding 377516k swap on /dev/hda2. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names Linux agpgart interface v0.100 (c) Dave Jones 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd09a1000, 00:40:c7:77:0a:d5, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139 rev K' eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe8000000 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0: clocking to 47451 /home/jesse/linux/drivers/usb/core/usb.c: registered new driver hub ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 20, pci mem d0a17000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:00:02.1: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 22, pci mem d0a20000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ehci_hcd 0000:00:02.2: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 21, pci mem d0a2e000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100