From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263510AbTLSSIP (ORCPT ); Fri, 19 Dec 2003 13:08:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263088AbTLSSIP (ORCPT ); Fri, 19 Dec 2003 13:08:15 -0500 Received: from a51.80.30.infovia.com.ar ([200.51.80.30]:22855 "EHLO TDIMSO27.mngt.tdata.com.ar") by vger.kernel.org with ESMTP id S263510AbTLSSHr (ORCPT ); Fri, 19 Dec 2003 13:07:47 -0500 Date: Fri, 19 Dec 2003 15:10:36 -0300 From: Federico Freire Subject: PROBLEM To: linux-kernel@vger.kernel.org Message-id: <200312191506.31367.fedekapo@speedy.com.ar> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: KMail/1.5.4 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is my first bug reporting so sorry if I give you the wrong information... and sorry for my english. I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10 minutes after I boot... I can't mount it, or record, etc. When I do dmesg I get this over and over again: hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) I googled but I didn't find anything about this... This is the output of ver_linux: -------------------------------------------- If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux Gnu C 3.2.3 Gnu make 3.80 util-linux 2.11z mount 2.11z module-init-tools 0.9.12 e2fsprogs 1.33 PPP 2.4.1 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.12 Net-tools 1.60 Kbd 1.06 Sh-utils 5.0 Modules Loaded snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom ------------------------------- I've been using kernel-2.6 since test10 and the bug is there since I tried it... I've dma enabled but when I disabled it I get the same error.. This is my dmesg: ------------------------------------ Calibrating delay loop... 3858.43 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 40k freed CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: AMD Athlon(tm) XP 2400+ stepping 01 per-CPU timeslice cutoff: 731.41 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 Total of 1 processors activated (3858.43 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1960.0714 MHz. ..... host bus clock speed is 340.0993 MHz. Starting migration thread for cpu 0 CPUS done 8 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:01[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:01[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1) 00:00:11[C] -> 2-22 -> IRQ 22 Pin 2-16 already programmed Pin 2-17 already programmed IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) 00:00:05[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1) 00:00:05[D] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1) 00:00:10[A] -> 2-21 -> IRQ 21 Pin 2-21 already programmed Pin 2-21 already programmed Pin 2-21 already programmed IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1) 00:00:12[A] -> 2-23 -> IRQ 23 Pin 2-18 already programmed ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0f3e vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 16 throttling states) bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3). Console: switching to colour frame buffer device 122x40 pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 6E040L0, ATA DISK drive hdb: SAMSUNG SV2044D, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdb: max request size: 128KiB hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66) /dev/ide/host0/bus0/target1/lun0: p1 Console: switching to colour frame buffer device 122x40 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) RAMDISK: Couldn't find valid RAM disk image starting at 0. found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 168k freed Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17 eth0: Identified 8139 chip type 'RTL-8100B/8139D' nvidia: no version magic, tainting kernel. nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 21, io base 0000e000 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 21, io base 0000e400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Linux video capture interface: v1.00 quickcam: no version magic, tainting kernel. quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------ quickcam [49.207228]: struct quickcam size: 5548 drivers/usb/core/usb.c: registered new driver quickcam i2c /dev entries driver registering 0-0290 NTFS driver 2.1.5 [Flags: R/O MODULE]. NTFS volume version 3.0. hub 1-0:1.0: new USB device on port 1, assigned address 2 quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2003/10/30 11:16:49 $) Module quickcam cannot be unloaded due to unsafe usage in include/linux/module.h:483 quickcam: Sensor HDCS-1000/1100 detected videodev: "QuickCam USB" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ hub 1-0:1.0: new USB device on port 2, assigned address 3 input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2 Real Time Clock Driver v1.12 blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff) blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff) eth0: link up, 10Mbps, half-duplex, lpa 0x0000 bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 5 changed to on Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xab/0xd0 [] kmem_cache_alloc+0x70/0x80 [] __get_vm_area+0x21/0x150 [] get_vm_area+0x33/0x40 [] __ioremap+0xb3/0x100 [] buffered_rmqueue+0xe2/0x190 [] ioremap_nocache+0x29/0xb0 [] os_map_kernel_space+0x68/0x6c [nvidia] [] map_vm_area+0x6b/0xd0 [] __nvsym00568+0x1f/0x2c [nvidia] [] __nvsym00775+0x6e/0xe0 [nvidia] [] __nvsym00781+0x1e/0x190 [nvidia] [] rm_init_adapter+0xc/0x10 [nvidia] [] nv_kern_open+0x122/0x26d [nvidia] [] chrdev_open+0x12c/0x2c0 [] devfs_open+0x11e/0x140 [] dentry_open+0x15a/0x240 [] filp_open+0x66/0x70 [] sys_open+0x53/0x90 [] syscall_call+0x7/0xb Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0 Call Trace: [] __might_sleep+0xab/0xd0 [] generic_unplug_device+0x8f/0xa0 [] kmem_cache_alloc+0x70/0x80 [] __get_vm_area+0x21/0x150 [] get_vm_area+0x33/0x40 [] __ioremap+0xb3/0x100 [] buffered_rmqueue+0xe2/0x190 [] ioremap_nocache+0x29/0xb0 [] os_map_kernel_space+0x68/0x6c [nvidia] [] map_vm_area+0x6b/0xd0 [] __nvsym00568+0x1f/0x2c [nvidia] [] __nvsym00775+0x6e/0xe0 [nvidia] [] __nvsym00781+0x1e/0x190 [nvidia] [] rm_init_adapter+0xc/0x10 [nvidia] [] nv_kern_open+0x122/0x26d [nvidia] [] chrdev_open+0x12c/0x2c0 [] devfs_open+0x11e/0x140 [] dentry_open+0x15a/0x240 [] filp_open+0x66/0x70 [] sys_open+0x53/0x90 [] syscall_call+0x7/0xb agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: lost interrupt hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) hdc: lost interrupt ---------------------- I hope that help...