Linux version 2.4.25 (root@beta) (gcc version 2.95.4 20011002 (Debian prerelease)) #6 Thu Mar 25 16:35:34 CET 2004 Booting on EB164 variation SX164 using machine vector SX164 from SRM Major Options: EV56 LEGACY_START MAGIC_SYSRQ Command line: ro root=/dev/sda1 memcluster 0, usage 1, start 0, end 256 memcluster 1, usage 0, start 256, end 32758 memcluster 2, usage 1, start 32758, end 32768 freeing pages 256:384 freeing pages 827:32758 reserving pages 827:828 pci: cia revision 1 (pyxis) On node 0 totalpages: 32758 zone(0): 32758 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ro root=/dev/sda1 Using epoch = 1952 Console: colour VGA+ 80x25 Calibrating delay loop... 1055.68 BogoMIPS Memory: 253616k/262064k available (2175k kernel code, 6400k reserved, 577k data, 368k init) Dentry cache hash table entries: 32768 (order: 6, 524288 bytes) Inode cache hash table entries: 16384 (order: 5, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 8192 bytes) Buffer cache hash table entries: 8192 (order: 3, 65536 bytes) Page-cache hash table entries: 32768 (order: 5, 262144 bytes) POSIX conformance testing by UNIFIX pci: passed tb register update test pci: passed sg loopback i/o read test pci: passed pte write cache snoop test pci: failed valid tag invalid pte reload test (mcheck; workaround available) pci: passed pci machine check test pci: tbia workaround enabled pci: enabling save/restore of SRM state SMC37c669 Super I/O Controller found @ 0x3f0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket srm_env: version 0.0.5 loaded successfully Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A rtc: Digital UNIX epoch (1952) detected Real Time Clock Driver v1.10f Floppy drive(s): fd0 is 2.88M FDC 0 is a post-1991 82077 Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #0 config 0000 status 780d advertising 01e1. eth0: Digital DS21140 Tulip rev 34 at 0xfffffc880a104000, 00:40:05:36:50:D4, IRQ 25. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SiI680: IDE controller at PCI slot 00:06.0 SiI680: chipset revision 1 SiI680: not 100% native mode: will probe irqs later SiI680: BASE CLOCK == 133 ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio hda: HDS722516VLAT80, ATA DISK drive blk: queue fffffc0000609c58, no I/O memory limit hdc: HDS722516VLAT80, ATA DISK drive blk: queue fffffc000060a3c0, no I/O memory limit ide0 at 0xfffffc880a102080-0xfffffc880a102087,0xfffffc880a10208a on irq 27 ide1 at 0xfffffc880a1020c0-0xfffffc880a1020c7,0xfffffc880a1020ca on irq 27 hda: attached ide-disk driver. hda: host protected area => 1 hda: 321672960 sectors (164697 MB) w/7938KiB Cache, CHS=20023/255/63, UDMA(100) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 321672960 sectors (164697 MB) w/7938KiB Cache, CHS=20023/255/63, UDMA(100) Partition check: hda: hda1 hdc: hdc1 SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 7, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875 detected with Symbios NVRAM sym53c875-0: rev 0x26 on pci bus 0 device 7 function 0 irq 26 sym53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking sym53c875-0: on-chip RAM at 0xa100000 sym53c875-0: restart (scsi reset). sym53c875-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx-1.7.3c-20010512 blk: queue fffffc000098d2d0, no I/O memory limit Vendor: IBM Model: DCAS-34330W Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 blk: queue fffffc000098d4d0, no I/O memory limit Vendor: IBM Model: DDYS-T36950N Rev: S93E Type: Direct-Access ANSI SCSI revision: 03 blk: queue fffffc000098d6d0, no I/O memory limit sym53c875-0-<0,0>: tagged command queue depth set to 8 sym53c875-0-<2,0>: tagged command queue depth set to 8 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0 sym53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15) SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB) sda: sda1 sda2 sda3 sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16) SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) sdb: sdb1 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. [events: 00000001] [events: 00000001] md: autorun ... md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md0 md: bind md: bind md: running: md: hdc1's event counter: 00000001 md: hda1's event counter: 00000001 md: md0: raid array is not clean -- starting background reconstruction md: RAID level 1 does not need chunksize! Continuing anyway. md0: max total readahead window set to 248k md0: 1 data-disks, max readahead per data-disk: 248k raid1: device hdc1 operational as mirror 0 raid1: device hda1 operational as mirror 1 raid1: raid set md0 not clean; reconstructing mirrors raid1: raid set md0 active with 2 out of 2 mirrors md: updating md0 RAID superblock on device md: hdc1 [events: 00000002]<6>(write) hdc1's sb offset: 160834624 md: syncing RAID array md0 md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc. md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction. md: using 248k window, over a total of 160834624 blocks. md: hda1 [events: 00000002]<6>(write) hda1's sb offset: 160834624 md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 368k freed Adding Swap: 265848k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting full-duplex based on MII#0 link partner capability of 01e1. md: md0: sync done. Unable to handle kernel paging request at virtual address 0000440003af267c find(826): Oops 0 pc = [] ra = [] ps = 0000 Not tainted v0 = 0000000000001068 t0 = fffffffffff7fff0 t1 = 0000000000080010 t2 = 0000440003af269c t3 = 0000000000000000 t4 = 0000440003af267c t5 = 0000440003af2674 t6 = 0000000000000002 t7 = fffffc000ec04000 s0 = fffffc000cb419c0 s1 = 0000000000000900 s2 = fffffc0000221000 s3 = fffffc000cb419c0 s4 = fffffc000fe94cc0 s5 = 0000000000000000 s6 = fffffc000098d8a0 a0 = fffffc0000221000 a1 = fffffc000cb419c0 a2 = fffffc000cb419c0 a3 = 0000000000001000 a4 = 0000000000000008 a5 = fffffc0000221018 t8 = 0000000000000000 t9 = 00004800038d1680 t10= 0000000000080010 t11= fffffc0000221020 pv = fffffc00004a8ba0 at = fffffc000022101c gp = fffffc000062fbe8 sp = fffffc000ec07c18 Trace:fffffc00004ab950 fffffc0000355ba0 fffffc0000392abc fffffc000043fba4 fffffc000043fcac fffffc000044000c fffffc0000355ba0 fffffc0000392b04 fffffc000036b5e0 fffffc000038ee28 fffffc000036ac28 fffffc000036b5e0 fffffc000036489c fffffc00003648f8 fffffc00003634b4 fffffc000036b5e0 fffffc000036b808 fffffc0000310c40 Code: 42fc0403 2ffe0000 42f90405 a0f003d8 40a49525 40c49526 40649523