From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265125AbUKATet (ORCPT ); Mon, 1 Nov 2004 14:34:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S277179AbUKATeB (ORCPT ); Mon, 1 Nov 2004 14:34:01 -0500 Received: from mx1.redhat.com ([66.187.233.31]:53958 "EHLO mx1.redhat.com") by vger.kernel.org with ESMTP id S291940AbUKATaj (ORCPT ); Mon, 1 Nov 2004 14:30:39 -0500 Date: Mon, 1 Nov 2004 19:30:21 GMT Message-Id: <200411011930.iA1JULKN023227@warthog.cambridge.redhat.com> From: dhowells@redhat.com To: torvalds@osdl.org, akpm@osdl.org, davidm@snapgear.com cc: linux-kernel@vger.kernel.org, uclinux-dev@uclinux.org Subject: [PATCH 10/14] FRV: Make calibrate_delay() optional In-Reply-To: <76b4a884-2c3c-11d9-91a1-0002b3163499@redhat.com> References: <76b4a884-2c3c-11d9-91a1-0002b3163499@redhat.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The attached patch makes calibrate_delay() optional. In this architecture, it's a waste of time since we can predict exactly what it's going to come up with just by looking at the CPU's hardware clock registers. Thus far, we haven't seem a board with any clock not dependent on the CPU's clock. Signed-Off-By: dhowells@redhat.com --- diffstat frv-calibrate-2610rc1bk10.diff init/main.c | 70 --------------------------------------------- lib/Makefile | 3 + lib/calibrate.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 88 insertions(+), 71 deletions(-) diff -uNr /warthog/kernels/linux-2.6.10-rc1-bk10/init/main.c linux-2.6.10-rc1-bk10-frv/init/main.c --- /warthog/kernels/linux-2.6.10-rc1-bk10/init/main.c 2004-11-01 11:45:34.000000000 +0000 +++ linux-2.6.10-rc1-bk10-frv/init/main.c 2004-11-01 11:47:05.147633905 +0000 @@ -182,15 +178,6 @@ return 0; } -static unsigned long preset_lpj; -static int __init lpj_setup(char *str) -{ - preset_lpj = simple_strtoul(str,NULL,0); - return 1; -} - -__setup("lpj=", lpj_setup); - /* * This should be approx 2 Bo*oMips to start (note initial shift), and will * still work even if initially too large, it will just take slightly longer @@ -199,67 +190,6 @@ EXPORT_SYMBOL(loops_per_jiffy); -/* - * This is the number of bits of precision for the loops_per_jiffy. Each - * bit takes on average 1.5/HZ seconds. This (like the original) is a little - * better than 1% - */ -#define LPS_PREC 8 - -void __devinit calibrate_delay(void) -{ - unsigned long ticks, loopbit; - int lps_precision = LPS_PREC; - - if (preset_lpj) { - loops_per_jiffy = preset_lpj; - printk("Calibrating delay loop (skipped)... " - "%lu.%02lu BogoMIPS preset\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100); - } else { - loops_per_jiffy = (1<<12); - - printk(KERN_DEBUG "Calibrating delay loop... "); - while ((loops_per_jiffy <<= 1) != 0) { - /* wait for "start of" clock tick */ - ticks = jiffies; - while (ticks == jiffies) - /* nothing */; - /* Go .. */ - ticks = jiffies; - __delay(loops_per_jiffy); - ticks = jiffies - ticks; - if (ticks) - break; - } - - /* - * Do a binary approximation to get loops_per_jiffy set to - * equal one clock (up to lps_precision bits) - */ - loops_per_jiffy >>= 1; - loopbit = loops_per_jiffy; - while (lps_precision-- && (loopbit >>= 1)) { - loops_per_jiffy |= loopbit; - ticks = jiffies; - while (ticks == jiffies) - /* nothing */; - ticks = jiffies; - __delay(loops_per_jiffy); - if (jiffies != ticks) /* longer than 1 tick */ - loops_per_jiffy &= ~loopbit; - } - - /* Round the value and print it */ - printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, - loops_per_jiffy); - } - -} - static int __init debug_kernel(char *str) { if (*str) diff -uNr /warthog/kernels/linux-2.6.10-rc1-bk10/lib/calibrate.c linux-2.6.10-rc1-bk10-frv/lib/calibrate.c --- /warthog/kernels/linux-2.6.10-rc1-bk10/lib/calibrate.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.10-rc1-bk10-frv/lib/calibrate.c 2004-11-01 11:47:05.186630659 +0000 @@ -0,0 +1,86 @@ +/* calibrate.c: default delay calibration + * + * Excised from init/main.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * GK 2/5/95 - Changed to support mounting root fs via NFS + * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96 + * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96 + * Simplified starting of init: Michael A. Griffith + * + */ + +#include +#include +#include + +static unsigned long preset_lpj; +static int __init lpj_setup(char *str) +{ + preset_lpj = simple_strtoul(str,NULL,0); + return 1; +} + +__setup("lpj=", lpj_setup); + +/* + * This is the number of bits of precision for the loops_per_jiffy. Each + * bit takes on average 1.5/HZ seconds. This (like the original) is a little + * better than 1% + */ +#define LPS_PREC 8 + +void __devinit calibrate_delay(void) +{ + unsigned long ticks, loopbit; + int lps_precision = LPS_PREC; + + if (preset_lpj) { + loops_per_jiffy = preset_lpj; + printk("Calibrating delay loop (skipped)... " + "%lu.%02lu BogoMIPS preset\n", + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100); + } else { + loops_per_jiffy = (1<<12); + + printk(KERN_DEBUG "Calibrating delay loop... "); + while ((loops_per_jiffy <<= 1) != 0) { + /* wait for "start of" clock tick */ + ticks = jiffies; + while (ticks == jiffies) + /* nothing */; + /* Go .. */ + ticks = jiffies; + __delay(loops_per_jiffy); + ticks = jiffies - ticks; + if (ticks) + break; + } + + /* + * Do a binary approximation to get loops_per_jiffy set to + * equal one clock (up to lps_precision bits) + */ + loops_per_jiffy >>= 1; + loopbit = loops_per_jiffy; + while (lps_precision-- && (loopbit >>= 1)) { + loops_per_jiffy |= loopbit; + ticks = jiffies; + while (ticks == jiffies) + /* nothing */; + ticks = jiffies; + __delay(loops_per_jiffy); + if (jiffies != ticks) /* longer than 1 tick */ + loops_per_jiffy &= ~loopbit; + } + + /* Round the value and print it */ + printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100, + loops_per_jiffy); + } + +} diff -uNr /warthog/kernels/linux-2.6.10-rc1-bk10/lib/Makefile linux-2.6.10-rc1-bk10-frv/lib/Makefile --- /warthog/kernels/linux-2.6.10-rc1-bk10/lib/Makefile 2004-11-01 11:45:34.000000000 +0000 +++ linux-2.6.10-rc1-bk10-frv/lib/Makefile 2004-11-01 12:00:25.742993383 +0000 @@ -5,7 +5,8 @@ lib-y := errno.o ctype.o string.o vsprintf.o cmdline.o \ bust_spinlocks.o rbtree.o radix-tree.o dump_stack.o \ kobject.o kref.o idr.o div64.o parser.o int_sqrt.o \ - bitmap.o extable.o kobject_uevent.o find_next_bit.o + bitmap.o extable.o kobject_uevent.o find_next_bit.o \ + calibrate.o ifeq ($(CONFIG_DEBUG_KOBJECT),y) CFLAGS_kobject.o += -DDEBUG