On Sat, Jan 01, 2005 at 06:23:44PM +0100, Pavel Machek wrote:
> e100 seems to have some suspend/resume support [but if even reloading
> e100 does not help, fault is not in e100]. Are you running with APIC
> enabled? Try noapic. Try acpi=off.

it had been fine in 2.6.9.  i think i had switched to using apic back
with 2.6.9 (to facilitate nmi_watchdog, maybe).

i'll try these options.  ultimately, though, i'm going to need acpi. :)

thanks.
-- 
John M Flinchbaugh
john@hjsoft.com