From: Serge Tchesmeli <zztchesmeli@echo.fr>
To: Duncan Sands <duncan.sands@math.u-psud.fr>
Cc: linux-kernel@vger.kernel.org, Roman Kagan <rkagan@mail.ru>
Subject: Re: 2.6.10 and speedtouch usb
Date: Mon, 3 Jan 2005 12:17:07 +0100 [thread overview]
Message-ID: <200501031217.07912.zztchesmeli@echo.fr> (raw)
In-Reply-To: <200412301300.30105.duncan.sands@math.u-psud.fr>
Le Jeudi 30 Décembre 2004 13:00, Duncan Sands a écrit :
> > It looks like the line status monitoring implemented in the driver in
> > 2.6.10 interferes with that in modem_run. Unless you have a reason to
> > keep using modem_run, you can let it go and use the line status
> > monitoring and firmware loading facilities provided by the driver
> > itself. Just follow Andrew's advice.
>
> Hi Roman, yes, but it would be good to understand what is going wrong - the
> debug info should help. It would also be good to know the modem revision.
> Serge, what revision do you see in /proc/bus/usb/devices?
>
> All the best,
>
Hi all, HAPPY NEW YEAR 2005!! :)
So, here the informatios asked:
- Modem revision:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06b9 ProdID=4061 Rev= 0.00
S: Manufacturer=ALCATEL
S: Product=Speed Touch USB
S: SerialNumber=0090D02E7A5A
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch
I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch
E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch
E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms
- Debug log:
Dec 31 22:53:05 gateway kernel: usb 2-1: bogus endpoint ep7in in
usb_submit_urb (bad maxpacket 0)<7>divert: not allocating divert_blk for
non-ethernet device ppp0
Dec 31 22:53:05 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:05 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:08 gateway last message repeated 403 times
Dec 31 22:53:08 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:08 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:11 gateway last message repeated 410 times
Dec 31 22:53:11 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:11 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:14 gateway last message repeated 407 times
Dec 31 22:53:14 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:14 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:17 gateway last message repeated 409 times
Dec 31 22:53:17 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:17 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:20 gateway last message repeated 408 times
Dec 31 22:53:20 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:20 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:23 gateway last message repeated 406 times
Dec 31 22:53:23 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:23 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:26 gateway last message repeated 407 times
Dec 31 22:53:26 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:26 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:29 gateway last message repeated 412 times
Dec 31 22:53:29 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:29 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:32 gateway last message repeated 407 times
Dec 31 22:53:32 gateway kernel: usb 2-1: bogus endpoint ep7out in
usb_submit_urb (bad maxpacket 0)<4>usb 2-1: usbfs: process 6023 (modem_run)
did not claim interface 0 before use
Dec 31 22:53:32 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:53:35 gateway last message repeated 409 times
Dec 31 22:53:35 gateway kernel: divert: no divert_blk to free, ppp0 not
ethernet
Dec 31 22:53:35 gateway kernel: usb 2-1: usbfs: process 6023 (modem_run) did
not claim interface 0 before use
Dec 31 22:54:05 gateway last message repeated 4089 times
and some other log in messages:
Dec 31 22:53:35 gateway modem_run[6023]: Error reading interrupts
Dec 31 22:54:01 gateway last message repeated 3538 times
Note:
I don't have try to change modem_run with the kernel firmware loader, i was
very busy this week end (new year + my grand mother die :( ), i'm still in
2.6.9 with modem_run and kernel speedtouch.
prev parent reply other threads:[~2005-01-03 11:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-27 10:08 2.6.10 and speedtouch usb Serge Tchesmeli
2004-12-27 13:25 ` Andrew Benton
2004-12-27 13:33 ` Serge Tchesmeli
2004-12-27 15:48 ` Andrew Benton
2004-12-27 16:03 ` Serge Tchesmeli
2004-12-29 9:11 ` Duncan Sands
2004-12-29 16:18 ` Roman Kagan
2004-12-30 12:00 ` Duncan Sands
2004-12-30 16:48 ` Serge Tchesmeli
2005-01-03 11:17 ` Serge Tchesmeli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200501031217.07912.zztchesmeli@echo.fr \
--to=zztchesmeli@echo.fr \
--cc=duncan.sands@math.u-psud.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=rkagan@mail.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).