[RESEND] [PATCH 0/7] ppc: remove cli()/sti() from arch/ppc/*

[RESEND] [PATCH 0/7] ppc: remove cli()/sti() from arch/ppc/*

[James Nelson]

This series of patches is to remove the last cli()/sti() function calls in
arch/ppc, and add spinlocks where necessary.

These are the only instances in active code that grep could find.

[RESEND] [PATCH 1/7] ppc: remove cli()/sti() in arch/ppc/4xx_io/serial_sicc.c

[James Nelson]

Replace save_flags()/restore_flags() with spin_lock_irqsave()/spin_unlock_irqrestore()
and document reasons for using spinlocks.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/4xx_io/serial_sicc.c linux-2.6.10-mm1/arch/ppc/4xx_io/serial_sicc.c
--- linux-2.6.10-mm1-original/arch/ppc/4xx_io/serial_sicc.c	2004-12-24 16:33:49.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/4xx_io/serial_sicc.c	2005-01-07 19:12:42.043984196 -0500
@@ -264,6 +264,7 @@
     unsigned int        flags;
     int         count;
     struct SICC_info    *info;
+    spinlock_t		sicc_lock;
 };
 
 #define SICC_XMIT_SIZE 1024
@@ -385,9 +386,10 @@
     struct SICC_info *info = tty->driver_data;
     unsigned long flags;
 
-    save_flags(flags); cli();
+    /* disable interrupts while stopping serial port interrupts */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     siccuart_disable_tx_interrupt(info);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 static void siccuart_start(struct tty_struct *tty)
@@ -395,11 +397,12 @@
     struct SICC_info *info = tty->driver_data;
     unsigned long flags;
 
-    save_flags(flags); cli();
+    /* disable interrupts while starting serial port interrupts */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     if (info->xmit.head != info->xmit.tail
         && info->xmit.buf)
         siccuart_enable_tx_interrupt(info);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 
@@ -604,7 +607,8 @@
 	return -ENOMEM;
     }
 
-    save_flags(flags); cli();
+    /* lock access to info while doing setup */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
 
     if (info->xmit.buf)
         free_page(page);
@@ -688,12 +692,12 @@
     siccuart_enable_rx_interrupt(info);
 
     info->flags |= ASYNC_INITIALIZED;
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     return 0;
 
 
 errout:
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     return retval;
 }
 
@@ -708,7 +712,8 @@
     if (!(info->flags & ASYNC_INITIALIZED))
         return;
 
-    save_flags(flags); cli(); /* Disable interrupts */
+    /* lock while shutting down port */
+    spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
 
     /*
      * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
@@ -746,7 +751,7 @@
 
     info->flags &= ~ASYNC_INITIALIZED;
 
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 
@@ -868,8 +873,8 @@
             info->ignore_status_mask |=  _LSR_OE_MASK;
     }
 
-    /* first, disable everything */
-    save_flags(flags); cli();
+    /* disable interrupts while reading and clearing registers */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
 
     old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
     old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
@@ -881,7 +886,7 @@
     /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
 
 
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 
 
     /* Set baud rate */
@@ -909,12 +914,13 @@
     if (!tty || !info->xmit.buf)
         return;
 
-    save_flags(flags); cli();
+    /* lock info->xmit while adding character to tx buffer */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
         info->xmit.buf[info->xmit.head] = ch;
         info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
     }
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 static void siccuart_flush_chars(struct tty_struct *tty)
@@ -928,9 +934,10 @@
         || !info->xmit.buf)
         return;
 
-    save_flags(flags); cli();
+    /* disable interrupts while transmitting characters */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     siccuart_enable_tx_interrupt(info);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 static int siccuart_write(struct tty_struct *tty,
@@ -943,8 +950,8 @@
     if (!tty || !info->xmit.buf || !tmp_buf)
         return 0;
 
-    save_flags(flags);
-    cli();
+    /* lock info->xmit while removing characters from buffer */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     while (1) {
         c = CIRC_SPACE_TO_END(info->xmit.head,
                       info->xmit.tail,
@@ -960,11 +967,11 @@
         count -= c;
         ret += c;
     }
-    restore_flags(flags);
     if (info->xmit.head != info->xmit.tail
         && !tty->stopped
         && !tty->hw_stopped)
         siccuart_enable_tx_interrupt(info);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     return ret;
 }
 
@@ -988,9 +995,10 @@
     unsigned long flags;
 
     pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
-    save_flags(flags); cli();
+    /* lock info->xmit while zeroing buffer counts */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     info->xmit.head = info->xmit.tail = 0;
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     wake_up_interruptible(&tty->write_wait);
     if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
         tty->ldisc.write_wakeup)
@@ -1019,10 +1027,11 @@
         siccuart_send_xchar(tty, STOP_CHAR(tty));
 
     if (tty->termios->c_cflag & CRTSCTS) {
-        save_flags(flags); cli();
+        /* disable interrupts while setting modem control lines */
+        spin_lock_irqsave(&info->state->sicc_lock,flags);
         info->mctrl &= ~TIOCM_RTS;
         info->port->set_mctrl(info->port, info->mctrl);
-        restore_flags(flags);
+        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     }
 }
 
@@ -1039,10 +1048,11 @@
     }
 
     if (tty->termios->c_cflag & CRTSCTS) {
-        save_flags(flags); cli();
+        /* disable interrupts while setting modem control lines */
+        spin_lock_irqsave(&info->state->sicc_lock,flags);
         info->mctrl |= TIOCM_RTS;
         info->port->set_mctrl(info->port, info->mctrl);
-        restore_flags(flags);
+        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     }
 }
 
@@ -1181,9 +1191,10 @@
     unsigned int result, status;
     unsigned long flags;
 
-    save_flags(flags); cli();
+    /* disable interrupts while reading status from port */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     status = readb(info->port->uart_base +  BL_SICC_LSR);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
 
     /*
@@ -1234,10 +1245,11 @@
     default:
         return -EINVAL;
     }
-    save_flags(flags); cli();
+    /* disable interrupts while setting modem control lines */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     if (old != info->mctrl)
         info->port->set_mctrl(info->port, info->mctrl);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     return 0;
 }
 
@@ -1248,14 +1260,15 @@
     unsigned int lcr_h;
 
 
-    save_flags(flags); cli();
+    /* disable interrupts while setting break state */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     lcr_h = readb(info->port + BL_SICC_LSR);
     if (break_state == -1)
         lcr_h |=  _LSR_LB_MASK;
     else
         lcr_h &= ~_LSR_LB_MASK;
     writeb(lcr_h, info->port + BL_SICC_LSRS);
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
 }
 
 static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
@@ -1303,9 +1316,10 @@
          *     RI where only 0->1 is counted.
          */
         case TIOCGICOUNT:
-            save_flags(flags); cli();
+            /* disable interrupts while getting interrupt count */
+            spin_lock_irqsave(&info->state->sicc_lock,flags);
             cnow = info->state->icount;
-            restore_flags(flags);
+            spin_unlock_irqrestore(&info->state->sicc_lock,flags);
             icount.cts = cnow.cts;
             icount.dsr = cnow.dsr;
             icount.rng = cnow.rng;
@@ -1342,22 +1356,24 @@
     /* Handle transition to B0 status */
     if ((old_termios->c_cflag & CBAUD) &&
         !(cflag & CBAUD)) {
-        save_flags(flags); cli();
+        /* disable interrupts while setting break state */
+        spin_lock_irqsave(&info->state->sicc_lock,flags);
         info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
         info->port->set_mctrl(info->port, info->mctrl);
-        restore_flags(flags);
+        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     }
 
     /* Handle transition away from B0 status */
     if (!(old_termios->c_cflag & CBAUD) &&
         (cflag & CBAUD)) {
-        save_flags(flags); cli();
+        /* disable interrupts while setting break state */
+        spin_lock_irqsave(&info->state->sicc_lock,flags);
         info->mctrl |= TIOCM_DTR;
         if (!(cflag & CRTSCTS) ||
             !test_bit(TTY_THROTTLED, &tty->flags))
             info->mctrl |= TIOCM_RTS;
         info->port->set_mctrl(info->port, info->mctrl);
-        restore_flags(flags);
+        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     }
 
     /* Handle turning off CRTSCTS */
@@ -1393,11 +1409,11 @@
 
     //pr_debug("siccuart_close() called\n");
 
-    save_flags(flags); cli();
+    /* lock tty->driver_data while closing port */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
 
     if (tty_hung_up_p(filp)) {
-        restore_flags(flags);
-        return;
+        goto quick_close;
     }
 
     if ((tty->count == 1) && (state->count != 1)) {
@@ -1416,11 +1432,10 @@
         state->count = 0;
     }
     if (state->count) {
-        restore_flags(flags);
-        return;
+        goto quick_close;
     }
     info->flags |= ASYNC_CLOSING;
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     /*
      * Now we wait for the transmit buffer to clear; and we notify
      * the line discipline to only process XON/XOFF characters.
@@ -1458,6 +1473,11 @@
     }
     info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
     wake_up_interruptible(&info->close_wait);
+    return;
+
+quick_close:
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+    return;
 }
 
 static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
@@ -1569,20 +1589,22 @@
      */
     retval = 0;
     add_wait_queue(&info->open_wait, &wait);
-    save_flags(flags); cli();
+    /* lock while decrementing state->count */
+    spin_lock_irqsave(&info->state->sicc_lock,flags);
     if (!tty_hung_up_p(filp)) {
         extra_count = 1;
         state->count--;
     }
-    restore_flags(flags);
+    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
     info->blocked_open++;
     while (1) {
-        save_flags(flags); cli();
+        /* disable interrupts while setting modem control lines */
+        spin_lock_irqsave(&info->state->sicc_lock,flags);
         if (tty->termios->c_cflag & CBAUD) {
             info->mctrl = TIOCM_DTR | TIOCM_RTS;
             info->port->set_mctrl(info->port, info->mctrl);
         }
-        restore_flags(flags);
+        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
         set_current_state(TASK_INTERRUPTIBLE);
         if (tty_hung_up_p(filp) ||
             !(info->flags & ASYNC_INITIALIZED)) {
@@ -1753,6 +1775,7 @@
         state->line     = i;
         state->close_delay  = 5 * HZ / 10;
         state->closing_wait = 30 * HZ;
+	spin_lock_init(&state->sicc_lock);
     }
 
 

[RESEND] [PATCH 2/7] ppc: remove cli()/sti() in arch/ppc/8xx_io/cs4218_tdm.c

[James Nelson]

Replace save_flags()/resore_flags() with spin_lock_irqsave()/spin_unlock_irqrestore()
and document reasons for locking.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/8xx_io/cs4218_tdm.c linux-2.6.10-mm1/arch/ppc/8xx_io/cs4218_tdm.c
--- linux-2.6.10-mm1-original/arch/ppc/8xx_io/cs4218_tdm.c	2004-12-24 16:33:51.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/8xx_io/cs4218_tdm.c	2005-01-07 19:46:23.267111848 -0500
@@ -55,6 +55,8 @@
 static char **sound_buffers = NULL;
 static char **sound_read_buffers = NULL;
 
+static spinlock_t cs4218_lock = SPIN_LOCK_UNLOCKED;
+
 /* Local copies of things we put in the control register.  Output
  * volume, like most codecs is really attenuation.
  */
@@ -1206,7 +1208,8 @@
 	volatile cbd_t	*bdp;
 	volatile cpm8xx_t *cp;
 
-	save_flags(flags); cli();
+	/* Protect buffer */
+	spin_lock_irqsave(&cs4218_lock, flags);
 #if 0
 	if (awacs_beep_state) {
 		/* sound takes precedence over beeps */
@@ -1263,7 +1266,7 @@
 
 		++sq.active;
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&cs4218_lock, flags);
 }
 
 
@@ -1275,7 +1278,8 @@
 	if (read_sq.active)
 		return;
 
-	save_flags(flags); cli();
+	/* Protect buffer */
+	spin_lock_irqsave(&cs4218_lock, flags);
 
 	/* This is all we have to do......Just start it up.
 	*/
@@ -1284,7 +1288,7 @@
 
 	read_sq.active = 1;
 
-        restore_flags(flags);
+        spin_unlock_irqrestore(&cs4218_lock, flags);
 }
 
 
@@ -1365,14 +1369,15 @@
 {
 	unsigned long flags;
 
-	save_flags(flags); cli();
+	/* not sure if this is needed, since hardware command is #if 0'd */
+	spin_lock_irqsave(&cs4218_lock, flags);
 	if (beep_playing) {
 #if 0
 		st_le16(&beep_dbdma_cmd->command, DBDMA_STOP);
 #endif
 		beep_playing = 0;
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&cs4218_lock, flags);
 }
 
 static struct timer_list beep_timer = TIMER_INITIALIZER(cs_nosound, 0, 0);
@@ -1401,21 +1406,22 @@
 		return;
 #endif
 	}
-	save_flags(flags); cli();
+	/* lock while modifying beep_timer */
+	spin_lock_irqsave(&cs4218_lock, flags);
 	del_timer(&beep_timer);
 	if (ticks) {
 		beep_timer.expires = jiffies + ticks;
 		add_timer(&beep_timer);
 	}
 	if (beep_playing || sq.active || beep_buf == NULL) {
-		restore_flags(flags);
+		spin_unlock_irqrestore(&cs4218_lock, flags);
 		return;		/* too hard, sorry :-( */
 	}
 	beep_playing = 1;
 #if 0
 	st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS);
 #endif
-	restore_flags(flags);
+	spin_unlock_irqrestore(&cs4218_lock, flags);
 
 	if (hz == beep_hz_cache && beep_volume == beep_volume_cache) {
 		nsamples = beep_nsamples_cache;
@@ -1442,7 +1448,7 @@
 	st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf));
 	awacs_beep_state = 1;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&cs4218_lock, flags);
 	if (beep_playing) {	/* i.e. haven't been terminated already */
 		out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
 		out_le32(&awacs->control,
@@ -1452,8 +1458,8 @@
 		out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
 		out_le32(&awacs_txdma->control, RUN | (RUN << 16));
 	}
+	spin_unlock_irqrestore(&cs4218_lock, flags);
 #endif
-	restore_flags(flags);
 }
 
 static MACHINE mach_cs4218 = {

[RESEND] [PATCH 3/7] ppc: remove cli()/sti() in arch/ppc/8xx_io/fec.c

[James Nelson]

Replace save_flags()/resore_flags() with spin_lock_irqsave()/spin_unlock_irqrestore()
and document reasons for locking.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/8xx_io/fec.c linux-2.6.10-mm1/arch/ppc/8xx_io/fec.c
--- linux-2.6.10-mm1-original/arch/ppc/8xx_io/fec.c	2004-12-24 16:35:28.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/8xx_io/fec.c	2005-01-07 19:58:55.806516338 -0500
@@ -389,6 +389,7 @@
 	flush_dcache_range((unsigned long)skb->data,
 			   (unsigned long)skb->data + skb->len);
 
+	/* disable interrupts while triggering transmit */
 	spin_lock_irq(&fep->lock);
 
 	/* Send it on its way.  Tell FEC its ready, interrupt when done,
@@ -539,6 +540,7 @@
 	struct	sk_buff	*skb;
 
 	fep = dev->priv;
+	/* lock while transmitting */
 	spin_lock(&fep->lock);
 	bdp = fep->dirty_tx;
 
@@ -799,6 +801,7 @@
 
 	if ((mip = mii_head) != NULL) {
 		ep->fec_mii_data = mip->mii_regval;
+
 	}
 }
 
@@ -817,8 +820,8 @@
 
 	retval = 0;
 
-	save_flags(flags);
-	cli();
+	/* lock while modifying mii_list */
+	spin_lock_irqsave(&fep->lock, flags);
 
 	if ((mip = mii_free) != NULL) {
 		mii_free = mip->mii_next;
@@ -836,7 +839,7 @@
 		retval = 1;
 	}
 
-	restore_flags(flags);
+	spin_unlock_irqrestore(&fep->lock, flags);
 
 	return(retval);
 }

Re: [RESEND] [PATCH 3/7] ppc: remove cli()/sti() in arch/ppc/8xx_io/fec.c

[Marcelo Tosatti]

Looks OK to me.

 Dan, Tom, this should be applied to the linuxppc-2.5 IMO.

On Sat, Jan 08, 2005 at 11:04:15AM -0600, James Nelson wrote:
> Replace save_flags()/resore_flags() with spin_lock_irqsave()/spin_unlock_irqrestore()
> and document reasons for locking.
> 
> Signed-off-by: James Nelson <james4765@gmail.com>
> 
> diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/8xx_io/fec.c linux-2.6.10-mm1/arch/ppc/8xx_io/fec.c
> --- linux-2.6.10-mm1-original/arch/ppc/8xx_io/fec.c	2004-12-24 16:35:28.000000000 -0500
> +++ linux-2.6.10-mm1/arch/ppc/8xx_io/fec.c	2005-01-07 19:58:55.806516338 -0500
> @@ -389,6 +389,7 @@
>  	flush_dcache_range((unsigned long)skb->data,
>  			   (unsigned long)skb->data + skb->len);
>  
> +	/* disable interrupts while triggering transmit */
>  	spin_lock_irq(&fep->lock);
>  
>  	/* Send it on its way.  Tell FEC its ready, interrupt when done,
> @@ -539,6 +540,7 @@
>  	struct	sk_buff	*skb;
>  
>  	fep = dev->priv;
> +	/* lock while transmitting */
>  	spin_lock(&fep->lock);
>  	bdp = fep->dirty_tx;
>  
> @@ -799,6 +801,7 @@
>  
>  	if ((mip = mii_head) != NULL) {
>  		ep->fec_mii_data = mip->mii_regval;
> +
>  	}
>  }
>  
> @@ -817,8 +820,8 @@
>  
>  	retval = 0;
>  
> -	save_flags(flags);
> -	cli();
> +	/* lock while modifying mii_list */
> +	spin_lock_irqsave(&fep->lock, flags);
>  
>  	if ((mip = mii_free) != NULL) {
>  		mii_free = mip->mii_next;
> @@ -836,7 +839,7 @@
>  		retval = 1;
>  	}
>  
> -	restore_flags(flags);
> +	spin_unlock_irqrestore(&fep->lock, flags);
>  
>  	return(retval);
>  }

[RESEND] [PATCH 4/7] ppc: remove cli()/sti() in arch/ppc/platforms/apus_setup.c

[James Nelson]

Replace cli() function call with local_irq_disable() in restart code.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/platforms/apus_setup.c linux-2.6.10-mm1/arch/ppc/platforms/apus_setup.c
--- linux-2.6.10-mm1-original/arch/ppc/platforms/apus_setup.c	2004-12-24 16:34:58.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/platforms/apus_setup.c	2005-01-03 19:29:40.720694742 -0500
@@ -480,7 +480,7 @@
 void
 apus_restart(char *cmd)
 {
-	cli();
+	local_irq_disable();
 
 	APUS_WRITE(APUS_REG_LOCK,
 		   REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK2);

[RESEND] [PATCH 5/7] ppc: remove cli()/sti() in arch/ppc/platforms/pal4_setup.c

[James Nelson]

Replace cli() function calls with local_irq_disable() in shutdown/restart code.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/platforms/pal4_setup.c linux-2.6.10-mm1/arch/ppc/platforms/pal4_setup.c
--- linux-2.6.10-mm1-original/arch/ppc/platforms/pal4_setup.c	2004-12-24 16:35:28.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/platforms/pal4_setup.c	2005-01-03 19:49:42.123501068 -0500
@@ -81,7 +81,7 @@
 static void
 pal4_restart(char *cmd)
 {
-        __cli();
+        local_irq_disable();
         __asm__ __volatile__("lis  3,0xfff0\n \
                               ori  3,3,0x100\n \
                               mtspr 26,3\n \
@@ -95,7 +95,7 @@
 static void
 pal4_power_off(void)
 {
-	__cli();
+	local_irq_disable();
 	for(;;);
 }
 

[RESEND] [PATCH 6/7] ppc: remove cli()/sti() in arch/ppc/syslib/m8xx_setup.c

[James Nelson]

Replace cli() function call with local_irq_disable() in shutdown code.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/syslib/m8xx_setup.c linux-2.6.10-mm1/arch/ppc/syslib/m8xx_setup.c
--- linux-2.6.10-mm1-original/arch/ppc/syslib/m8xx_setup.c	2004-12-24 16:34:32.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/syslib/m8xx_setup.c	2005-01-03 19:26:53.224307353 -0500
@@ -238,7 +238,7 @@
 {
 	__volatile__ unsigned char dummy;
 
-	cli();
+	local_irq_disable();
 	((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr |= 0x00000080;
 
 	/* Clear the ME bit in MSR to cause checkstop on machine check

[RESEND] [PATCH 7/7] ppc: remove cli()/sti() in arch/ppc/syslib/qspan_pci.c

[James Nelson]

Replace save_flags()/resore_flags() with spin_lock_irqsave()/spin_unlock_irqrestore()
and document reasons for locking.

Signed-off-by: James Nelson <james4765@gmail.com>

diff -urN --exclude='*~' linux-2.6.10-mm1-original/arch/ppc/syslib/qspan_pci.c linux-2.6.10-mm1/arch/ppc/syslib/qspan_pci.c
--- linux-2.6.10-mm1-original/arch/ppc/syslib/qspan_pci.c	2004-12-24 16:34:26.000000000 -0500
+++ linux-2.6.10-mm1/arch/ppc/syslib/qspan_pci.c	2005-01-07 19:47:51.355219639 -0500
@@ -94,6 +94,8 @@
 #define mk_config_type1(bus, dev, offset) \
 	mk_config_addr(bus, dev, offset) | 1;
 
+static spinlock_t pcibios_lock = SPIN_LOCK_UNLOCKED;
+
 int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
 				  unsigned char offset, unsigned char *val)
 {
@@ -109,8 +111,8 @@
 	}
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -124,7 +126,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	offset ^= 0x03;
@@ -148,8 +150,8 @@
 	}
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -164,7 +166,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
@@ -185,8 +187,8 @@
 	}
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -200,7 +202,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	return PCIBIOS_SUCCESSFUL;
@@ -225,8 +227,8 @@
 	*cp = val;
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -240,7 +242,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	return PCIBIOS_SUCCESSFUL;
@@ -265,8 +267,8 @@
 	*sp = val;
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -280,7 +282,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	return PCIBIOS_SUCCESSFUL;
@@ -297,8 +299,8 @@
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 #ifdef CONFIG_RPXCLASSIC
-	save_flags(flags);
-	cli();
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
 	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
 	eieio();
 #endif
@@ -312,7 +314,7 @@
 #ifdef CONFIG_RPXCLASSIC
 	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
 	eieio();
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pcibios_lock, flags);
 #endif
 
 	return PCIBIOS_SUCCESSFUL;

Re: [RESEND] [PATCH 0/7] ppc: remove cli()/sti() from arch/ppc/*

[Tom Rini]

On Sat, Jan 08, 2005 at 11:03:49AM -0600, James Nelson wrote:

> This series of patches is to remove the last cli()/sti() function calls in
> arch/ppc, and add spinlocks where necessary.

I'll push this to Andrew and hope they move from there, thanks.

-- 
Tom Rini
http://gate.crashing.org/~trini/