From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261173AbVFCXdI (ORCPT ); Fri, 3 Jun 2005 19:33:08 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261177AbVFCXdI (ORCPT ); Fri, 3 Jun 2005 19:33:08 -0400 Received: from umbar.esa.informatik.tu-darmstadt.de ([130.83.163.30]:50048 "EHLO umbar.esa.informatik.tu-darmstadt.de") by vger.kernel.org with ESMTP id S261173AbVFCX2a (ORCPT ); Fri, 3 Jun 2005 19:28:30 -0400 Date: Sat, 4 Jun 2005 01:28:28 +0200 From: Andreas Koch To: linux-pci@atrey.karlin.mff.cuni.cz, linux-kernel@vger.kernel.org, gregkh@suse.de, torvalds@osdl.org Subject: PROBLEM: Devices behind PCI Express-to-PCI bridge not mapped Message-ID: <20050603232828.GA29860@erebor.esa.informatik.tu-darmstadt.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.8i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org [Greg K-H suggested I distribute this more widely] Hello all, there appear to be difficulties correctly mapping addresses behind a PCI Express-to-PCI bridge in kernel 2.6.12-rc5. Specifically, this occurs on my Acer Travelmate 8100 notebook (Pentium M, Intel 915M chipset) when it is connected via PCI Express to the ezDock docking station. While all of the USB and FireWire devices are visible using config space reads, they cannot be accessed correctly (all normal reads appear to return 0xff). After checking the dmesg logs, I find PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0 This would confirm my hypothesis, since reads go the route of Processor Intel 82801xx ICH6 southbridge PCI Express port 3 0000:00:1c.2 Intel 6702PXH PCIE-PCI bridge 0000:02:00.0 ezDock-internal PCI bus 0000:03:xx.x USB Firewire ... Since the PCIE-PCI bridge cannot be memory-mapped, the devices behind it cannot be accessed correctly. I am no expert on debugging this part of the kernel, but I will gladly provide additional info to resolve this problem. For your reference, I have attached a dmesg log with PCI debugging info, two lspci outputs (-vvt and -vvx), and a dump of /proc/iomem. Many thanks, Andreas Koch OUTPUT OF dmesg ***************************************************************** Linux version 2.6.12-rc5 (root@grima) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #8 Thu Jun 2 23:14:25 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe80000 (usable) BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data) BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 523904 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294528 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f68d0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7fe80e14 ACPI: FADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88e8a ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88efe ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88f64 ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88f9c ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe88fd8 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x7fe81249 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x7fe81071 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x7fe80e58 ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x8086a201 base: 0x0 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec20000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1995.414 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2069408k/2095616k available (3325k kernel code, 24912k reserved, 1527k data, 216k init, 1178112k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3932.16 BogoMIPS (lpj=1966080) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2061k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND search_node c20da160 start_node c20da160 return_node 00000000 ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND search_node c20dada0 start_node c20dada0 return_node 00000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Scanning bus 0000:00 PCI: Found 0000:00:00.0 [8086/2590] 000600 00 PCI: Calling quirk c0271990 for 0000:00:00.0 PCI: Calling quirk c0271f50 for 0000:00:00.0 PCI: Calling quirk c03c29a0 for 0000:00:00.0 PCI: Calling quirk c03c2b80 for 0000:00:00.0 PCI: Calling quirk c03c2d70 for 0000:00:00.0 PCI: Found 0000:00:01.0 [8086/2591] 000604 01 PCI: Calling quirk c0271990 for 0000:00:01.0 PCI: Calling quirk c0271f50 for 0000:00:01.0 PCI: Calling quirk c03c29a0 for 0000:00:01.0 PCI: Calling quirk c03c2b80 for 0000:00:01.0 PCI: Calling quirk c03c2d70 for 0000:00:01.0 PCI: Found 0000:00:1b.0 [8086/2668] 000403 00 PCI: Calling quirk c0271990 for 0000:00:1b.0 PCI: Calling quirk c0271f50 for 0000:00:1b.0 PCI: Calling quirk c03c29a0 for 0000:00:1b.0 PCI: Calling quirk c03c2b80 for 0000:00:1b.0 PCI: Calling quirk c03c2d70 for 0000:00:1b.0 PCI: Found 0000:00:1c.0 [8086/2660] 000604 01 PCI: Calling quirk c0271990 for 0000:00:1c.0 PCI: Calling quirk c0271f50 for 0000:00:1c.0 PCI: Calling quirk c03c29a0 for 0000:00:1c.0 PCI: Calling quirk c03c2b80 for 0000:00:1c.0 PCI: Calling quirk c03c2d70 for 0000:00:1c.0 PCI: Found 0000:00:1c.1 [8086/2662] 000604 01 PCI: Calling quirk c0271990 for 0000:00:1c.1 PCI: Calling quirk c0271f50 for 0000:00:1c.1 PCI: Calling quirk c03c29a0 for 0000:00:1c.1 PCI: Calling quirk c03c2b80 for 0000:00:1c.1 PCI: Calling quirk c03c2d70 for 0000:00:1c.1 PCI: Found 0000:00:1c.2 [8086/2664] 000604 01 PCI: Calling quirk c0271990 for 0000:00:1c.2 PCI: Calling quirk c0271f50 for 0000:00:1c.2 PCI: Calling quirk c03c29a0 for 0000:00:1c.2 PCI: Calling quirk c03c2b80 for 0000:00:1c.2 PCI: Calling quirk c03c2d70 for 0000:00:1c.2 PCI: Found 0000:00:1d.0 [8086/2658] 000c03 00 PCI: Calling quirk c0271990 for 0000:00:1d.0 PCI: Calling quirk c0271f50 for 0000:00:1d.0 PCI: Calling quirk c03c29a0 for 0000:00:1d.0 PCI: Calling quirk c03c2b80 for 0000:00:1d.0 PCI: Calling quirk c03c2d70 for 0000:00:1d.0 PCI: Found 0000:00:1d.1 [8086/2659] 000c03 00 PCI: Calling quirk c0271990 for 0000:00:1d.1 PCI: Calling quirk c0271f50 for 0000:00:1d.1 PCI: Calling quirk c03c29a0 for 0000:00:1d.1 PCI: Calling quirk c03c2b80 for 0000:00:1d.1 PCI: Calling quirk c03c2d70 for 0000:00:1d.1 PCI: Found 0000:00:1d.2 [8086/265a] 000c03 00 PCI: Calling quirk c0271990 for 0000:00:1d.2 PCI: Calling quirk c0271f50 for 0000:00:1d.2 PCI: Calling quirk c03c29a0 for 0000:00:1d.2 PCI: Calling quirk c03c2b80 for 0000:00:1d.2 PCI: Calling quirk c03c2d70 for 0000:00:1d.2 PCI: Found 0000:00:1d.3 [8086/265b] 000c03 00 PCI: Calling quirk c0271990 for 0000:00:1d.3 PCI: Calling quirk c0271f50 for 0000:00:1d.3 PCI: Calling quirk c03c29a0 for 0000:00:1d.3 PCI: Calling quirk c03c2b80 for 0000:00:1d.3 PCI: Calling quirk c03c2d70 for 0000:00:1d.3 PCI: Found 0000:00:1d.7 [8086/265c] 000c03 00 PCI: Calling quirk c0271990 for 0000:00:1d.7 PCI: Calling quirk c0271f50 for 0000:00:1d.7 PCI: Calling quirk c03c29a0 for 0000:00:1d.7 PCI: Calling quirk c03c2b80 for 0000:00:1d.7 PCI: Calling quirk c03c2d70 for 0000:00:1d.7 PCI: Found 0000:00:1e.0 [8086/2448] 000604 01 PCI: Calling quirk c0271990 for 0000:00:1e.0 PCI: Calling quirk c0271f50 for 0000:00:1e.0 PCI: Calling quirk c03c29a0 for 0000:00:1e.0 PCI: Calling quirk c03c2b80 for 0000:00:1e.0 PCI: Calling quirk c03c2d70 for 0000:00:1e.0 PCI: Found 0000:00:1f.0 [8086/2641] 000601 00 PCI: Calling quirk c0271990 for 0000:00:1f.0 PCI: Calling quirk c0271f50 for 0000:00:1f.0 PCI: Calling quirk c03c29a0 for 0000:00:1f.0 PCI: Calling quirk c03c2b80 for 0000:00:1f.0 PCI: Calling quirk c03c2d70 for 0000:00:1f.0 PCI: Found 0000:00:1f.2 [8086/2653] 000101 00 PCI: Calling quirk c0271990 for 0000:00:1f.2 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Calling quirk c0271f50 for 0000:00:1f.2 PCI: Calling quirk c03c29a0 for 0000:00:1f.2 PCI: Calling quirk c03c2b80 for 0000:00:1f.2 PCI: Calling quirk c03c2d70 for 0000:00:1f.2 PCI: Found 0000:00:1f.3 [8086/266a] 000c05 00 PCI: Calling quirk c0271990 for 0000:00:1f.3 PCI: Calling quirk c0271f50 for 0000:00:1f.3 PCI: Calling quirk c03c29a0 for 0000:00:1f.3 PCI: Calling quirk c03c2b80 for 0000:00:1f.3 PCI: Calling quirk c03c2d70 for 0000:00:1f.3 PCI: Fixups for bus 0000:00 PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0 PCI: Scanning bus 0000:01 PCI: Found 0000:01:00.0 [1002/5653] 000300 00 PCI: Calling quirk c0271990 for 0000:01:00.0 PCI: Calling quirk c0271f50 for 0000:01:00.0 PCI: Calling quirk c03c29a0 for 0000:01:00.0 PCI: Calling quirk c03c2d70 for 0000:01:00.0 Boot video device is 0000:01:00.0 PCI: Fixups for bus 0000:01 PCI: Bus scan for 0000:01 returning with max=01 PCI: Scanning behind PCI bridge 0000:00:1c.0, config 090900, pass 0 PCI: Scanning bus 0000:09 PCI: Fixups for bus 0000:09 PCI: Bus scan for 0000:09 returning with max=09 PCI: Scanning behind PCI bridge 0000:00:1c.1, config 0a0a00, pass 0 PCI: Scanning bus 0000:0a PCI: Fixups for bus 0000:0a PCI: Bus scan for 0000:0a returning with max=0a PCI: Scanning behind PCI bridge 0000:00:1c.2, config 040200, pass 0 PCI: Scanning bus 0000:02 PCI: Found 0000:02:00.0 [8086/032c] 000604 01 PCI: Calling quirk c0271990 for 0000:02:00.0 PCI: Calling quirk c0271f50 for 0000:02:00.0 PCI: Calling quirk c03c29a0 for 0000:02:00.0 PCI: Calling quirk c03c2b80 for 0000:02:00.0 PCI: Calling quirk c03c2d70 for 0000:02:00.0 PCI: Fixups for bus 0000:02 PCI: Scanning behind PCI bridge 0000:02:00.0, config 040302, pass 0 PCI: Scanning bus 0000:03 PCI: Found 0000:03:02.0 [1106/3038] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:02.0 PCI: Calling quirk c0271a80 for 0000:03:02.0 PCI: Calling quirk c0271f50 for 0000:03:02.0 PCI: Calling quirk c03c29a0 for 0000:03:02.0 PCI: Calling quirk c03c2d70 for 0000:03:02.0 PCI: Found 0000:03:02.1 [1106/3038] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:02.1 PCI: Calling quirk c0271a80 for 0000:03:02.1 PCI: Calling quirk c0271f50 for 0000:03:02.1 PCI: Calling quirk c03c29a0 for 0000:03:02.1 PCI: Calling quirk c03c2d70 for 0000:03:02.1 PCI: Found 0000:03:02.2 [1106/3104] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:02.2 PCI: Calling quirk c0271a80 for 0000:03:02.2 PCI: Calling quirk c0271f50 for 0000:03:02.2 PCI: Calling quirk c03c29a0 for 0000:03:02.2 PCI: Calling quirk c03c2d70 for 0000:03:02.2 PCI: Found 0000:03:03.0 [1106/3038] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:03.0 PCI: Calling quirk c0271a80 for 0000:03:03.0 PCI: Calling quirk c0271f50 for 0000:03:03.0 PCI: Calling quirk c03c29a0 for 0000:03:03.0 PCI: Calling quirk c03c2d70 for 0000:03:03.0 PCI: Found 0000:03:03.1 [1106/3038] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:03.1 PCI: Calling quirk c0271a80 for 0000:03:03.1 PCI: Calling quirk c0271f50 for 0000:03:03.1 PCI: Calling quirk c03c29a0 for 0000:03:03.1 PCI: Calling quirk c03c2d70 for 0000:03:03.1 PCI: Found 0000:03:03.2 [1106/3104] 000c03 00 PCI: Calling quirk c0271990 for 0000:03:03.2 PCI: Calling quirk c0271a80 for 0000:03:03.2 PCI: Calling quirk c0271f50 for 0000:03:03.2 PCI: Calling quirk c03c29a0 for 0000:03:03.2 PCI: Calling quirk c03c2d70 for 0000:03:03.2 PCI: Found 0000:03:04.0 [104c/8023] 000c00 00 PCI: Calling quirk c0271990 for 0000:03:04.0 PCI: Calling quirk c0271f50 for 0000:03:04.0 PCI: Calling quirk c03c29a0 for 0000:03:04.0 PCI: Calling quirk c03c2d70 for 0000:03:04.0 PCI: Found 0000:03:05.0 [104c/ac50] 000607 02 PCI: Calling quirk c0271990 for 0000:03:05.0 PCI: Calling quirk c0271f50 for 0000:03:05.0 PCI: Calling quirk c03c29a0 for 0000:03:05.0 PCI: Calling quirk c03c2d70 for 0000:03:05.0 PCI: Found 0000:03:06.0 [10ec/8197] 000703 00 PCI: Calling quirk c0271990 for 0000:03:06.0 PCI: Calling quirk c0271f50 for 0000:03:06.0 PCI: Calling quirk c03c29a0 for 0000:03:06.0 PCI: Calling quirk c03c2d70 for 0000:03:06.0 PCI: Fixups for bus 0000:03 PCI: Scanning behind PCI bridge 0000:03:05.0, config 040403, pass 0 PCI: Scanning behind PCI bridge 0000:03:05.0, config 040403, pass 1 PCI: Bus scan for 0000:03 returning with max=07 PCI: Scanning behind PCI bridge 0000:02:00.0, config 040302, pass 1 PCI: Bus scan for 0000:02 returning with max=07 PCI: Scanning behind PCI bridge 0000:00:1e.0, config 080600, pass 0 PCI: Scanning bus 0000:06 PCI: Found 0000:06:03.0 [8086/4223] 000280 00 PCI: Calling quirk c0271990 for 0000:06:03.0 PCI: Calling quirk c0271f50 for 0000:06:03.0 PCI: Calling quirk c03c29a0 for 0000:06:03.0 PCI: Calling quirk c03c2b80 for 0000:06:03.0 PCI: Calling quirk c03c2d70 for 0000:06:03.0 PCI: Found 0000:06:06.0 [14e4/169c] 000200 00 PCI: Calling quirk c0271990 for 0000:06:06.0 PCI: Calling quirk c0271f50 for 0000:06:06.0 PCI: Calling quirk c03c29a0 for 0000:06:06.0 PCI: Calling quirk c03c2d70 for 0000:06:06.0 PCI: Found 0000:06:07.0 [104c/8026] 000c00 00 PCI: Calling quirk c0271990 for 0000:06:07.0 PCI: Calling quirk c0271f50 for 0000:06:07.0 PCI: Calling quirk c03c29a0 for 0000:06:07.0 PCI: Calling quirk c03c2d70 for 0000:06:07.0 PCI: Found 0000:06:09.0 [1217/7223] 000607 02 PCI: Calling quirk c0271990 for 0000:06:09.0 PCI: Calling quirk c0271f50 for 0000:06:09.0 PCI: Calling quirk c03c29a0 for 0000:06:09.0 PCI: Calling quirk c03c2d70 for 0000:06:09.0 PCI: Found 0000:06:09.1 [1217/7223] 000607 02 PCI: Calling quirk c0271990 for 0000:06:09.1 PCI: Calling quirk c0271f50 for 0000:06:09.1 PCI: Calling quirk c03c29a0 for 0000:06:09.1 PCI: Calling quirk c03c2d70 for 0000:06:09.1 PCI: Found 0000:06:09.2 [1217/7110] 000880 00 PCI: Calling quirk c0271990 for 0000:06:09.2 PCI: Calling quirk c0271f50 for 0000:06:09.2 PCI: Calling quirk c03c29a0 for 0000:06:09.2 PCI: Calling quirk c03c2d70 for 0000:06:09.2 PCI: Found 0000:06:09.3 [1217/7223] 000607 02 PCI: Calling quirk c0271990 for 0000:06:09.3 PCI: Calling quirk c0271f50 for 0000:06:09.3 PCI: Calling quirk c03c29a0 for 0000:06:09.3 PCI: Calling quirk c03c2d70 for 0000:06:09.3 PCI: Fixups for bus 0000:06 PCI: Transparent bridge - 0000:00:1e.0 PCI: Scanning behind PCI bridge 0000:06:09.0, config 070706, pass 0 PCI: Scanning behind PCI bridge 0000:06:09.1, config 080806, pass 0 PCI: Scanning behind PCI bridge 0000:06:09.3, config 000000, pass 0 PCI: Scanning behind PCI bridge 0000:06:09.0, config 070706, pass 1 PCI: Scanning behind PCI bridge 0000:06:09.1, config 080806, pass 1 PCI: Scanning behind PCI bridge 0000:06:09.3, config 000000, pass 1 PCI: Bus scan for 0000:06 returning with max=12 PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1 PCI: Scanning behind PCI bridge 0000:00:1c.0, config 090900, pass 1 PCI: Scanning behind PCI bridge 0000:00:1c.1, config 0a0a00, pass 1 PCI: Scanning behind PCI bridge 0000:00:1c.2, config 040200, pass 1 PCI: Scanning behind PCI bridge 0000:00:1e.0, config 080600, pass 1 PCI: Bus scan for 0000:00 returning with max=12 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 29) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0 got res [80000000:80000fff] bus [80000000:80000fff] flags 200 for BAR 0 of 0000:06:09.3 PCI: moved device 0000:06:09.3 resource 0 (200) to 80000000 Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1117747355.222:0): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/O]. Initializing Cryptographic API PCI: Calling quirk c0271840 for 0000:00:00.0 PCI: Calling quirk c0271fa0 for 0000:00:00.0 PCI: Calling quirk c0271840 for 0000:00:01.0 PCI: Calling quirk c0271fa0 for 0000:00:01.0 PCI: Calling quirk c0271840 for 0000:00:1b.0 PCI: Calling quirk c0271fa0 for 0000:00:1b.0 PCI: Calling quirk c0271840 for 0000:00:1c.0 PCI: Calling quirk c0271fa0 for 0000:00:1c.0 PCI: Calling quirk c0271840 for 0000:00:1c.1 PCI: Calling quirk c0271fa0 for 0000:00:1c.1 PCI: Calling quirk c0271840 for 0000:00:1c.2 PCI: Calling quirk c0271fa0 for 0000:00:1c.2 PCI: Calling quirk c0271840 for 0000:00:1d.0 PCI: Calling quirk c0271fa0 for 0000:00:1d.0 PCI: Calling quirk c0271840 for 0000:00:1d.1 PCI: Calling quirk c0271fa0 for 0000:00:1d.1 PCI: Calling quirk c0271840 for 0000:00:1d.2 PCI: Calling quirk c0271fa0 for 0000:00:1d.2 PCI: Calling quirk c0271840 for 0000:00:1d.3 PCI: Calling quirk c0271fa0 for 0000:00:1d.3 PCI: Calling quirk c0271840 for 0000:00:1d.7 PCI: Calling quirk c0271fa0 for 0000:00:1d.7 PCI: Calling quirk c0271840 for 0000:00:1e.0 PCI: Calling quirk c0271fa0 for 0000:00:1e.0 PCI: Calling quirk c0271840 for 0000:00:1f.0 PCI: Calling quirk c0271fa0 for 0000:00:1f.0 PCI: Calling quirk c0271840 for 0000:00:1f.2 PCI: Calling quirk c0271fa0 for 0000:00:1f.2 PCI: Calling quirk c0271840 for 0000:00:1f.3 PCI: Calling quirk c0271fa0 for 0000:00:1f.3 PCI: Calling quirk c0271840 for 0000:01:00.0 PCI: Calling quirk c0271840 for 0000:02:00.0 PCI: Calling quirk c0271fa0 for 0000:02:00.0 PCI: Calling quirk c0271840 for 0000:03:02.0 PCI: Calling quirk c0271840 for 0000:03:02.1 PCI: Calling quirk c0271840 for 0000:03:03.0 PCI: Calling quirk c0271840 for 0000:03:03.1 PCI: Calling quirk c0271840 for 0000:03:02.2 PCI: Calling quirk c0271840 for 0000:03:03.2 PCI: Calling quirk c0271840 for 0000:03:04.0 PCI: Calling quirk c0271840 for 0000:03:05.0 PCI: Calling quirk c0271840 for 0000:03:06.0 PCI: Calling quirk c0271840 for 0000:06:03.0 PCI: Calling quirk c0271fa0 for 0000:06:03.0 PCI: Calling quirk c0271840 for 0000:06:06.0 PCI: Calling quirk c0271840 for 0000:06:07.0 PCI: Calling quirk c0271840 for 0000:06:09.0 PCI: Calling quirk c0271840 for 0000:06:09.1 PCI: Calling quirk c0271840 for 0000:06:09.3 PCI: Calling quirk c0271840 for 0000:06:09.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4 acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Enabling bus mastering for device 0000:00:1c.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Enabling bus mastering for device 0000:00:1c.1 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Enabling bus mastering for device 0000:00:1c.2 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (49 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 32 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com tg3.c:v3.29 (May 23, 2005) ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Enabling bus mastering for device 0000:06:06.0 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:75:57:33 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] libata version 1.10 loaded. ahci version 1.00 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci: probe of 0000:00:1f.2 failed with error -12 ata_piix version 1.03 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Enabling bus mastering for device 0000:00:1f.2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7d09 84:4003 85:3469 86:3c09 87:4003 88:203f ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: ST9100823A Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15 ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: HL-DT-ST Model: DVDRAM GMA-4080N Rev: 0H35 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5 ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 30 PCI: Enabling bus mastering for device 0000:03:04.0 ohci1394: fw-host0: Remapped memory spaces reg 0xf8834800 ohci1394: fw-host0: Soft reset finished ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: ffffffff ohci1394: fw-host0: 32 iso receive contexts available ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: ffffffff ohci1394: fw-host0: 32 iso transmit contexts available ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Transmit DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Transmit DMA ctx=1 initialized ohci1394: fw-host0: OHCI-1394 165.165 (PCI): IRQ=[30] MMIO=[c8304800-c8304fff] Max Packet=[65536] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] Losing some ticks... checking if CPU frequency changed. ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to setting max_packet_size to 512 bytes ohci1394: fw-host0: EEPROM Present: 1 ohci1394: fw-host0: EEPROM 00: ff ohci1394: fw-host0: EEPROM 01: ff ohci1394: fw-host0: EEPROM 02: ff ohci1394: fw-host0: EEPROM 03: ff ohci1394: fw-host0: EEPROM 04: ff ohci1394: fw-host0: EEPROM 05: ff ohci1394: fw-host0: EEPROM 06: ff ohci1394: fw-host0: EEPROM 07: ff ohci1394: fw-host0: EEPROM 08: ff ohci1394: fw-host0: EEPROM 09: ff ohci1394: fw-host0: EEPROM 0a: ff ohci1394: fw-host0: EEPROM 0b: ff ohci1394: fw-host0: EEPROM 0c: ff ohci1394: fw-host0: EEPROM 0d: ff ohci1394: fw-host0: EEPROM 0e: ff ohci1394: fw-host0: EEPROM 0f: ff ohci1394: fw-host0: EEPROM 10: ff ohci1394: fw-host0: EEPROM 11: ff ohci1394: fw-host0: EEPROM 12: ff ohci1394: fw-host0: EEPROM 13: ff ohci1394: fw-host0: EEPROM 14: ff ohci1394: fw-host0: EEPROM 15: ff ohci1394: fw-host0: EEPROM 16: ff ohci1394: fw-host0: EEPROM 17: ff ohci1394: fw-host0: EEPROM 18: ff ohci1394: fw-host0: EEPROM 19: ff ohci1394: fw-host0: EEPROM 1a: ff ohci1394: fw-host0: EEPROM 1b: ff ohci1394: fw-host0: EEPROM 1c: ff ohci1394: fw-host0: EEPROM 1d: ff ohci1394: fw-host0: EEPROM 1e: ff ohci1394: fw-host0: EEPROM 1f: ff ieee1394: CSR: setting expire to 98, HZ=1000 ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Enabling bus mastering for device 0000:06:07.0 ohci1394: fw-host1: Remapped memory spaces reg 0xf8846000 ohci1394: fw-host1: Soft reset finished ohci1394: fw-host1: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394: fw-host1: 4 iso receive contexts available ohci1394: fw-host1: Iso contexts reg: 00000098 implemented: 000000ff ohci1394: fw-host1: 8 iso transmit contexts available ohci1394: fw-host1: Receive DMA ctx=0 initialized ohci1394: fw-host1: Receive DMA ctx=0 initialized ohci1394: fw-host1: Transmit DMA ctx=0 initialized ohci1394: fw-host1: Transmit DMA ctx=1 initialized ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8415000-c84157ff] Max Packet=[2048] ieee1394: CSR: setting expire to 98, HZ=1000 ieee1394: raw1394: /dev/raw1394 device initialized sbp2: $Rev: 1219 $ Ben Collins ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31 Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50] yenta 0000:03:05.0: no resource of type 100 available, trying to continue... yenta 0000:03:05.0: no resource of type 100 available, trying to continue... Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66 Yenta TI: socket 0000:03:05.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:03:05.0 falling back to parallel PCI interrupts Yenta TI: socket 0000:03:05.0 no PCI interrupts. Fish. Please report. Yenta: ISA IRQ mask 0x0000, PCI irq 0 Socket status: ffffffff ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18 Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070] Yenta O2: res at 0x94/0xD4: ea/00 Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0438, PCI irq 18 Socket status: 30000006 ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18 Yenta: CardBus bridge found at 0000:06:09.1 [1025:0070] Yenta: ISA IRQ mask 0x0438, PCI irq 18 Socket status: 30000006 ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host1: IntEvent: 00020010 ohci1394: fw-host1: irq_handler: Bus reset requested ohci1394: fw-host1: Cancel request received ohci1394: fw-host1: Got RQPkt interrupt status=0x00008409 ohci1394: fw-host1: Single packet rcv'd ohci1394: fw-host1: Got phy packet ctx=0 ... discarded ohci1394: fw-host1: IntEvent: 00010000 ohci1394: fw-host1: SelfID interrupt received (phyid 0, root) ohci1394: fw-host1: SelfID packet 0x807f8842 received ieee1394: Including SelfID 0x42887f80 ohci1394: fw-host1: SelfID for this node is 0x807f8842 ohci1394: fw-host1: SelfID complete ohci1394: fw-host1: PhyReqFilter=ffffffffffffffff ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 ieee1394: NodeMgr: Processing host reset for knodemgrd_1 PCI: Enabling device 0000:06:09.3 (0080 -> 0082) ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18 Yenta: CardBus bridge found at 0000:06:09.3 [1025:0070] Yenta: ISA IRQ mask 0x0438, PCI irq 18 Socket status: 30000410 ieee1394: send packet local: ffc00140 ffc0ffff f0000400 ieee1394: received packet: ffc00140 ffc0ffff f0000400 ieee1394: send packet local: ffc00160 ffc00000 00000000 a07b0404 ieee1394: received packet: ffc00160 ffc00000 00000000 a07b0404 ieee1394: send packet local: ffc00540 ffc0ffff f0000404 ieee1394: received packet: ffc00540 ffc0ffff f0000404 ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331 ieee1394: received packet: ffc00560 ffc00000 00000000 34393331 ieee1394: send packet local: ffc00940 ffc0ffff f0000408 ieee1394: received packet: ffc00940 ffc0ffff f0000408 ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0 ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0 ieee1394: send packet local: ffc00d40 ffc0ffff f000040c ieee1394: received packet: ffc00d40 ffc0ffff f000040c ieee1394: send packet local: ffc00d60 ffc00000 00000000 009fc000 ieee1394: received packet: ffc00d60 ffc00000 00000000 009fc000 ieee1394: send packet local: ffc01140 ffc0ffff f0000410 ieee1394: received packet: ffc01140 ffc0ffff f0000410 ieee1394: send packet local: ffc01160 ffc00000 00000000 1cd13800 ieee1394: received packet: ffc01160 ffc00000 00000000 1cd13800 ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000 ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000 ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000 ieee1394: received packet: ffc01570 ffc00000 00000000 04000000 ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2 ieee1394: Host added: ID:BUS[1-00:1023] GUID[00c09f000038d11c] ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0 ohci1394: fw-host1: Inserting packet for node 1-63:1023, tlabel=0, tcode=0x0, speed=0 ohci1394: fw-host1: Starting transmit DMA ctx=0 ohci1394: fw-host1: IntEvent: 00000001 ohci1394: fw-host1: Got reqTxComplete interrupt status=0x00008011 ohci1394: fw-host1: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0 data=0x1F0000C0 ctx=0 usbmon: debugs is not available ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: capability 0001 at 68 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8004000 ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 ehci_hcd 0000:00:1d.7: supports USB remote wakeup usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller usb usb1: Manufacturer: Linux 2.6.12-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good ACPI: PCI Interrupt 0000:03:02.2[C] -> GSI 26 (level, low) -> IRQ 26 PCI: Enabling bus mastering for device 0000:03:02.2 ehci_hcd 0000:03:02.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:03:02.2: reset hcs_params 0xffffffff dbg=15 ind cc=15 pcc=15 ports=15 ehci_hcd 0000:03:02.2: reset portroute 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 ehci_hcd 0000:03:02.2: reset hcc_params ffffffff caching frame 256/512/1024 park 64 bit addr ehci_hcd 0000:03:02.2: capability c2125a00 at ff ehci_hcd 0000:03:02.2: illegal capability! ehci_hcd 0000:03:02.2: ...powerdown ports... hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000 ehci_hcd 0000:03:02.2: bogus port configuration: cc=15 x pcc=15 < ports=15 ehci_hcd 0000:03:02.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:03:02.2: irq 26, io mem 0xc8304000 ehci_hcd 0000:03:02.2: reset command ffffffff park=3 ithresh=63 LReset IAAD Async Periodic period=?? R ehci_hcd 0000:03:02.2: startup error -19 ehci_hcd 0000:03:02.2: USB bus 2 deregistered ehci_hcd 0000:03:02.2: init 0000:03:02.2 fail, -19 ACPI: PCI Interrupt 0000:03:03.2[C] -> GSI 29 (level, low) -> IRQ 29 PCI: Enabling bus mastering for device 0000:03:03.2 ehci_hcd 0000:03:03.2: VIA Technologies, Inc. USB 2.0 (#2) ehci_hcd 0000:03:03.2: reset hcs_params 0xffffffff dbg=15 ind cc=15 pcc=15 ports=15 ehci_hcd 0000:03:03.2: reset portroute 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 ehci_hcd 0000:03:03.2: reset hcc_params ffffffff caching frame 256/512/1024 park 64 bit addr ehci_hcd 0000:03:03.2: capability c2125a00 at ff ehci_hcd 0000:03:03.2: illegal capability! ehci_hcd 0000:03:03.2: ...powerdown ports... ehci_hcd 0000:03:03.2: bogus port configuration: cc=15 x pcc=15 < ports=15 ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:03:03.2: irq 29, io mem 0xc8304400 ehci_hcd 0000:03:03.2: reset command ffffffff park=3 ithresh=63 LReset IAAD Async Periodic period=?? R ehci_hcd 0000:03:03.2: startup error -19 ehci_hcd 0000:03:03.2: USB bus 2 deregistered ehci_hcd 0000:03:03.2: init 0000:03:03.2 fail, -19 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 uhci_hcd 0000:00:1d.0: detected 2 ports usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 usb usb2: Manufacturer: Linux 2.6.12-rc5 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 uhci_hcd 0000:00:1d.1: detected 2 ports usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 usb usb3: Manufacturer: Linux 2.6.12-rc5 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 uhci_hcd 0000:00:1d.2: detected 2 ports usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 usb usb4: Manufacturer: Linux 2.6.12-rc5 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: hotplug usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 uhci_hcd 0000:00:1d.3: detected 2 ports usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 usb usb5: Manufacturer: Linux 2.6.12-rc5 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 24 (level, low) -> IRQ 24 uhci_hcd 0000:03:02.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:03:02.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:03:02.0: irq 24, io base 0x00003040 uhci_hcd 0000:03:02.0: detected 8 ports uhci_hcd 0000:03:02.0: port count misdetected? forcing to 2 ports uhci_hcd 0000:03:02.0: USBCMD_HCRESET timed out! uhci_hcd 0000:03:02.0: startup error -110 uhci_hcd 0000:03:02.0: USB bus 6 deregistered uhci_hcd 0000:03:02.0: init 0000:03:02.0 fail, -110 uhci_hcd: probe of 0000:03:02.0 failed with error -110 ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 25 (level, low) -> IRQ 25 uhci_hcd 0000:03:02.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:03:02.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:03:02.1: irq 25, io base 0x00003060 uhci_hcd 0000:03:02.1: detected 8 ports uhci_hcd 0000:03:02.1: port count misdetected? forcing to 2 ports uhci_hcd 0000:03:02.1: USBCMD_HCRESET timed out! uhci_hcd 0000:03:02.1: startup error -110 uhci_hcd 0000:03:02.1: USB bus 6 deregistered uhci_hcd 0000:03:02.1: init 0000:03:02.1 fail, -110 uhci_hcd: probe of 0000:03:02.1 failed with error -110 ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 27 (level, low) -> IRQ 27 uhci_hcd 0000:03:03.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:03:03.0: irq 27, io base 0x00003080 uhci_hcd 0000:03:03.0: detected 8 ports uhci_hcd 0000:03:03.0: port count misdetected? forcing to 2 ports uhci_hcd 0000:03:03.0: USBCMD_HCRESET timed out! uhci_hcd 0000:03:03.0: startup error -110 uhci_hcd 0000:03:03.0: USB bus 6 deregistered uhci_hcd 0000:03:03.0: init 0000:03:03.0 fail, -110 uhci_hcd: probe of 0000:03:03.0 failed with error -110 ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 28 (level, low) -> IRQ 28 uhci_hcd 0000:03:03.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:03:03.1: irq 28, io base 0x000030a0 uhci_hcd 0000:03:03.1: detected 8 ports uhci_hcd 0000:03:03.1: port count misdetected? forcing to 2 ports uhci_hcd 0000:03:03.1: USBCMD_HCRESET timed out! uhci_hcd 0000:03:03.1: startup error -110 uhci_hcd 0000:03:03.1: USB bus 6 deregistered uhci_hcd 0000:03:03.1: init 0000:03:03.1 fail, -110 uhci_hcd: probe of 0000:03:03.1 failed with error -110 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usbcore: registered new driver auerswald mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8192 buckets, 65536 max) - 212 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC ACPI: (supports S0 S3 S4 S5) RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard on isa0060/serio0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 216k freed Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 18 new absolute packet format Touchpad has extended capability bits -> 4 multi-buttons, i.e. besides standard buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 uhci_hcd 0000:00:1d.0: suspend_hc uhci_hcd 0000:00:1d.1: suspend_hc uhci_hcd 0000:00:1d.2: suspend_hc uhci_hcd 0000:00:1d.3: suspend_hc ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names Adding 2097144k swap on /dev/vg0/swap. Priority:-1 extents:1 ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. OUTPUT OF lspci -vvx ********************************************************* 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] #10 [0141] 00: 86 80 91 25 07 00 10 00 03 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 20 20: 10 c8 10 c8 00 d0 f0 d7 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 0c 00 0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 60 26 04 00 10 00 04 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 09 09 00 00 00 00 20 20: 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 62 26 04 00 10 00 04 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 0a 0a 00 00 00 00 20 20: 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 64 26 04 00 10 00 04 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 04 00 00 00 00 20 20: 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 04 00 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [50] #0d [0000] 00: 86 80 48 24 07 00 10 00 d4 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 06 08 20 f0 00 80 22 20: 40 c8 40 c8 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 18a0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 53 26 05 00 b0 02 04 80 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: a1 18 00 00 00 00 00 00 00 00 00 00 25 10 70 00 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 02 00 00 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [44] #10 [0071] Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] 00: 86 80 2c 03 07 00 10 00 09 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 02 03 04 30 30 30 a0 22 20: 20 c8 30 c8 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 04 00 0000:03:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 4c 10 50 ac 07 00 10 02 02 00 07 06 10 a8 02 00 10: 00 50 30 c8 a0 00 00 02 03 04 07 b0 00 00 20 c8 20: 00 f0 23 c8 00 00 24 c8 00 f0 27 c8 00 f0 ff ff 30: fc 0f 00 00 00 00 00 00 00 00 00 00 ff 01 c0 05 40: 4c 10 50 ac 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:03:06.0 Modem: Realtek Semiconductor Co., Ltd. SmartLAN56 56K Modem (prog-if 00 [Generic]) Subsystem: AMBIT Microsystem Corp.: Unknown device 3006 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 17 12 23 72 87 00 10 04 00 00 07 06 00 a8 82 00 10: 00 60 41 c8 a0 00 00 02 06 07 0a b0 00 00 40 80 20: 00 f0 7f 80 00 00 80 80 00 f0 bf 80 01 40 00 00 30: fd 40 00 00 01 44 00 00 fd 44 00 00 0b 01 80 05 40: 25 10 70 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:06:09.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 17 12 23 72 87 00 10 04 00 00 07 06 00 a8 82 00 10: 00 70 41 c8 a0 00 00 02 06 0b 0e b0 00 00 c0 80 20: 00 f0 ff 80 00 00 00 81 00 f0 3f 81 01 48 00 00 30: fd 48 00 00 01 4c 00 00 fd 4c 00 00 0a 01 80 05 40: 25 10 70 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:06:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator Subsystem: Acer Incorporated [ALI]: Unknown device 0070 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 17 12 23 72 87 00 10 04 00 00 07 06 00 a8 82 00 10: 00 00 00 80 a0 00 00 02 06 0f 12 b0 00 00 40 81 20: 00 f0 7f 81 00 00 80 81 00 f0 bf 81 01 50 00 00 30: fd 50 00 00 01 54 00 00 fd 54 00 00 00 01 80 05 40: 25 10 70 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OUTPUT OF lspci -vvt *********************************************************** -[00]-+-00.0 Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller +-01.0-[01]----00.0 ATI Technologies Inc: Unknown device 5653 +-1b.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller +-1c.0-[09]-- +-1c.1-[0a]-- +-1c.2-[02-04]----00.0-[03-04]--+-02.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller | +-02.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller | +-02.2 VIA Technologies, Inc. USB 2.0 | +-03.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller | +-03.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller | +-03.2 VIA Technologies, Inc. USB 2.0 | +-04.0 Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) | +-05.0 Texas Instruments PCI1410 PC card Cardbus Controller | \-06.0 Realtek Semiconductor Co., Ltd. SmartLAN56 56K Modem +-1d.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 +-1d.1 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 +-1d.2 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 +-1d.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 +-1d.7 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller +-1e.0-[06-08]--+-03.0 Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter | +-06.0 Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet | +-07.0 Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) | +-09.0 O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller | +-09.1 O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller | +-09.2 O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator | \-09.3 O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller +-1f.0 Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge +-1f.2 Intel Corporation 82801FBM (ICH6M) SATA Controller \-1f.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller /proc/iomem ******************************************************************* 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cdfff : Video ROM 000ce000-000cffff : reserved 000f0000-000fffff : System ROM 00100000-7fe7ffff : System RAM 00100000-0043f68e : Kernel code 0043f68f-005bd2ff : Kernel data 7fe80000-7fe88fff : ACPI Tables 7fe89000-7fefffff : ACPI Non-volatile Storage 7ff00000-7fffffff : reserved 80000000-80000fff : 0000:06:09.3 80000000-80000fff : yenta_socket 80400000-807fffff : PCI CardBus #07 80800000-80bfffff : PCI CardBus #07 80c00000-80ffffff : PCI CardBus #0b 81000000-813fffff : PCI CardBus #0b 81400000-817fffff : PCI CardBus #0f 81800000-81bfffff : PCI CardBus #0f a0000000-a0000fff : pcmcia_socket3 c8000000-c8003fff : 0000:00:1b.0 c8000000-c8003fff : ICH HD audio c8004000-c80043ff : 0000:00:1d.7 c8004000-c80043ff : ehci_hcd c8100000-c81fffff : PCI Bus #01 c8100000-c810ffff : 0000:01:00.0 c8304800-c8304fff : ohci1394 c8305000-c8305fff : yenta_socket c8400000-c840ffff : 0000:06:06.0 c8400000-c840ffff : tg3 c8410000-c8413fff : 0000:06:07.0 c8414000-c8414fff : 0000:06:03.0 c8415000-c84157ff : 0000:06:07.0 c8415000-c84157ff : ohci1394 c8416000-c8416fff : 0000:06:09.0 c8416000-c8416fff : yenta_socket c8417000-c8417fff : 0000:06:09.1 c8417000-c8417fff : yenta_socket c8418000-c8418fff : 0000:06:09.2 d0000000-d7ffffff : PCI Bus #01 d0000000-d7ffffff : 0000:01:00.0 e0000000-f0005fff : reserved f0008000-f000bfff : reserved fed20000-fed8ffff : reserved ff000000-ffffffff : reserved