From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262503AbVFIWju (ORCPT ); Thu, 9 Jun 2005 18:39:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262501AbVFIWjl (ORCPT ); Thu, 9 Jun 2005 18:39:41 -0400 Received: from umbar.esa.informatik.tu-darmstadt.de ([130.83.163.30]:19328 "EHLO umbar.esa.informatik.tu-darmstadt.de") by vger.kernel.org with ESMTP id S262502AbVFIWig (ORCPT ); Thu, 9 Jun 2005 18:38:36 -0400 Date: Fri, 10 Jun 2005 00:38:35 +0200 From: Andreas Koch To: Andreas Koch Cc: Ivan Kokshaysky , Benjamin Herrenschmidt , Linus Torvalds , linux-pci@atrey.karlin.mff.cuni.cz, linux-kernel@vger.kernel.org, gregkh@suse.de Subject: Re: PROBLEM: Devices behind PCI Express-to-PCI bridge not mapped Message-ID: <20050609223835.GB26023@erebor.esa.informatik.tu-darmstadt.de> References: <20050604155742.GA14384@erebor.esa.informatik.tu-darmstadt.de> <20050605204645.A28422@jurassic.park.msu.ru> <20050606002739.GA943@erebor.esa.informatik.tu-darmstadt.de> <20050606184335.A30338@jurassic.park.msu.ru> <20050608173409.GA32004@erebor.esa.informatik.tu-darmstadt.de> <20050609023639.A7067@jurassic.park.msu.ru> <1118289850.6850.164.camel@gaston> <20050609175441.C9187@jurassic.park.msu.ru> <20050609175429.GA26023@erebor.esa.informatik.tu-darmstadt.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20050609175429.GA26023@erebor.esa.informatik.tu-darmstadt.de> User-Agent: Mutt/1.5.8i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I did some more experimentation, and to my great the surprise, the serial port on the dock _is_ functioning, even when the rest of the dock is dead. So, I managed to capture a full log using the serial console. I sure hope that we can get to the bottom of this now :-) Andreas Linux version 2.6.12-rc5 (root@grima) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #24 Fri Jun 10 00:25:07 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe80000 (usable) BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data) BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x8086a201 base: 0x0 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root console=ttyS00 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1995.600 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2069340k/2095616k available (3366k kernel code, 24980k reserved, 1541k data, 220k init, 1178112k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2061k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND search_node c20da160 start_node c20da160 return_node 00000000 ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND search_node c20dada0 start_node c20dada0 return_node 00000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15<7>Losing some ticks... checking if CPU frequency changed. ) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs<7>Losing some ticks... checking if CPU frequency changed. 1 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 29) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 10 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 10 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 10 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 10 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 9 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 10 of bridge 0000:02:00.0 PCI: Cannot allocate resource region 7 of bridge 0000:03:05.0 PCI: Cannot allocate resource region 8 of bridge 0000:03:05.0 PCI: Cannot allocate resource region 9 of bridge 0000:03:05.0 PCI: Cannot allocate resource region 10 of bridge 0000:03:05.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:1e.0 PCI: Cannot allocate resource region 10 of bridge 0000:00:1e.0 PCI: Cannot allocate resource region 7 of bridge 0000:06:09.0 PCI: Cannot allocate resource region 8 of bridge 0000:06:09.0 PCI: Cannot allocate resource region 9 of bridge 0000:06:09.0 PCI: Cannot allocate resource region 10 of bridge 0000:06:09.0 PCI: Cannot allocate resource region 7 of bridge 0000:06:09.1 PCI: Cannot allocate resource region 8 of bridge 0000:06:09.1 PCI: Cannot allocate resource region 9 of bridge 0000:06:09.1 PCI: Cannot allocate resource region 10 of bridge 0000:06:09.1 PCI: Cannot allocate resource region 7 of bridge 0000:06:09.3 PCI: Cannot allocate resource region 8 of bridge 0000:06:09.3 PCI: Cannot allocate resource region 9 of bridge 0000:06:09.3 PCI: Cannot allocate resource region 10 of bridge 0000:06:09.3 PCI: Cannot allocate resource region 4 of device 0000:03:02.0 PCI: Cannot allocate resource region 4 of device 0000:03:02.1 PCI: Cannot allocate resource region 0 of device 0000:03:02.2 PCI: Cannot allocate resource region 4 of device 0000:03:03.0 PCI: Cannot allocate resource region 4 of device 0000:03:03.1 PCI: Cannot allocate resource region 0 of device 0000:03:03.2 PCI: Cannot allocate resource region 0 of device 0000:03:04.0 PCI: Cannot allocate resource region 1 of device 0000:03:04.0 PCI: Cannot allocate resource region 0 of device 0000:03:05.0 PCI: Cannot allocate resource region 0 of device 0000:03:06.0 PCI: Ignore bogus resource 7 [0:0] of 0000:00:1e.0 PCI: Ignore bogus resource 8 [0:0] of 0000:00:1e.0 PCI: Ignore bogus resource 9 [0:0] of 0000:00:1e.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: c8100000-c81fffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 4, cardbus bridge: 0000:03:05.0 IO window: 00003000-00003fff IO window: 00004000-00004fff PREFETCH window: 80000000-81ffffff MEM window: 82000000-83ffffff PCI: Bridge: 0000:02:00.0 IO window: 3000-5fff MEM window: 82000000-84ffffff PREFETCH window: 80000000-81ffffff PCI: Bridge: 0000:00:1c.2 IO window: 3000-5fff MEM window: 82000000-84ffffff PREFETCH window: 80000000-81ffffff PCI: Bus 7, cardbus bridge: 0000:06:09.0 IO window: 00006000-00006fff IO window: 00007000-00007fff PREFETCH window: 86000000-87ffffff MEM window: 88000000-89ffffff PCI: Bus 11, cardbus bridge: 0000:06:09.1 IO window: 00008000-00008fff IO window: 00009000-00009fff PREFETCH window: 8a000000-8bffffff MEM window: 8c000000-8dffffff PCI: Bus 15, cardbus bridge: 0000:06:09.3 IO window: 0000a000-0000afff IO window: 0000b000-0000bfff PREFETCH window: 8e000000-8fffffff MEM window: 90000000-91ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31 ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Enabling device 0000:06:09.3 (0080 -> 0082) ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18 Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1118356439.954:0): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/O]. Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 assign_interrupt_mode Found MSI capability ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (60 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 32 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com tg3.c:v3.29 (May 23, 2005) ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:75:57:33 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci: probe of 0000:00:1f.2 failed with error -12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14 ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: ST9100823A Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: HL-DT-ST Model: DVDRAM GMA-4080N Rev: 0H35 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5 ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 30 ohci1394: fw-host0: Remapped memory spaces reg 0xf8834000 ohci1394: fw-host0: Soft reset finished ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: ffffffff ohci1394: fw-host0: 32 iso receive contexts available ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: ffffffff ohci1394: fw-host0: 32 iso transmit contexts available ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Transmit DMA ctx=0 initialized ohci1394: fw-host0: Runaway loop while stopping context: ... ohci1394: fw-host0: Transmit DMA ctx=1 initialized ohci1394: fw-host0: OHCI-1394 165.165 (PCI): IRQ=[30] MMIO=[84005000-840057ff] Max Packet=[65536] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host1: Remapped memory spaces reg 0xf8846000 ohci1394: fw-host1: Soft reset finished ohci1394: fw-host1: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394: fw-host1: 4 iso receive contexts available ohci1394: fw-host1: Iso contexts reg: 00000098 implemented: 000000ff ohci1394: fw-host1: 8 iso transmit contexts available ohci1394: fw-host1: Receive DMA ctx=0 initialized ohci1394: fw-host1: Receive DMA ctx=0 initialized ohci1394: fw-host1: Transmit DMA ctx=0 initialized ohci1394: fw-host1: Transmit DMA ctx=1 initialized ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8415000-c84157ff] Max Packet=[2048] ieee1394: raw1394: /dev/raw1394 device initialized sbp2: $Rev: 1219 $ Ben Collins ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31 Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50] yenta 0000:03:05.0: Preassigned resource 0 busy, reconfiguring... yenta 0000:03:05.0: no resource of type 1200 available, trying to continue... yenta 0000:03:05.0: Preassigned resource 1 busy, reconfiguring... Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66 Yenta TI: socket 0000:03:05.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:03:05.0 falling back to parallel PCI interrupts ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host1: IntEvent: 00020010 ohci1394: fw-host1: irq_handler: Bus reset requested ohci1394: fw-host1: Cancel request received ohci1394: fw-host1: Got RQPkt interrupt status=0x00008409 ohci1394: fw-host1: IntEvent: 00010000 ohci1394: fw-host1: SelfID interrupt received (phyid 0, root) ohci1394: fw-host1: SelfID packet 0x807f8842 received ohci1394: fw-host1: SelfID for this node is 0x807f8842 ohci1394: fw-host1: SelfID complete ohci1394: fw-host1: PhyReqFilter=ffffffffffffffff ohci1394: fw-host1: Single packet rcv'd Yenta TI: socket 0000:03:05.0 no PCI interrupts. Fish. Please report. Yenta: ISA IRQ mask 0x0000, PCI irq 0 Socket status: ffffffff ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18 Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070] yenta 0000:06:09.0: Preassigned resource 0 busy, reconfiguring... yenta 0000:06:09.0: Preassigned resource 1 busy, reconfiguring... Yenta O2: res at 0x94/0xD4: ea/00 Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0438, PCI irq 18 Socket status: 30000006 ohci1394: fw-host1: Inserting packet for node 1-63:1023, tlabel=0, tcode=0x0, speed=0 ohci1394: fw-host1: Starting transmit DMA ctx=0 ohci1394: fw-host1: IntEvent: 00000001 ohci1394: fw-host1: Got reqTxComplete interrupt status=0x00008011 ohci1394: fw-host1: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0 data=0x1F0000C0 ctx=0 ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18